P11 FERROXCUBE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Supersedes data of September 2004 2008 Sep 01 FERROXCUBE P11/7 P cores and accessories
2008 Sep 01 935
P cores and accessories P11/7 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.956 mm −1 Ve effective volume 251 mm 3 Ie effective length 15.5 mm Ae effective area 16.2 mm 2 Amin minimum area 13.2 mm 2 m mass of set ≈ 1.8 g MGC150 2.2 0.3 9 0.4 0 4.7 0 0.2 11.1 0.2 6.8 0.25 2.1 0.1O 2.9O M1.4 0.45 max 4.4 0.3 0 6.5 0.1 0.2 2 0.1 Fig.1 P11/7 core set. Dimensions in mm. Core sets for filter applications Clamping force for AL measurements, 35 ±10 N. GRADE AL (nH) µe TOTAL AIR GAP (µm) TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) 3D3 16 ±3% ≈ 12 ≈ 2210 P11/7-3D3-E16/N P11/7-3D3-E16 25 ±3% ≈ 19 ≈ 1280 P11/7-3D3-E25/N P11/7-3D3-E25 40 ±3% ≈ 31 ≈ 710 P11/7-3D3-E40/N P11/7-3D3-E40 63 ±3% ≈ 48 ≈ 400 P11/7-3D3-E63/N P11/7-3D3-E63 100 ±3% ≈ 76 ≈ 220 P11/7-3D3-A100/N P11/7-3D3-A100 800 ±25% ≈ 610 ≈ 0 − P11/7-3D3 3H3 160 ±3% ≈ 122 ≈ 140 P11/7-3H3-A160/N P11/7-3H3-A160 250 ±3% ≈ 190 ≈ 80 P11/7-3H3-A250/N P11/7-3H3-A250 1650 ±25% ≈ 1260 ≈ 0 − P11/7-3H3
2008 Sep 01 936
P cores and accessories P11/7 Core sets for general purpose transformers and power applications Clamping force for AL measurements, 35 ±10 N. Core sets of high permeability grades Clamping force for AL measurements, 35 ±10 N. Properties of core sets under power conditions Note 1. Measured at 60 °C. GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3C81 100 ±3% ≈ 76 ≈ 240 P11/7-3C81-A100 160 ±3% ≈ 122 ≈ 140 P11/7-3C81-A160 250 ±3% ≈ 190 ≈ 85 P11/7-3C81-A250 2050 ±25% ≈ 1560 ≈ 0P 1 1 / 7 - 3 C 8 1 3C91 2050 ±25% ≈ 1560 ≈ 0P 1 1 / 7 - 3 C 9 1 3F3 100 ±3% ≈ 76 ≈ 240 P11/7-3F3-A100 160 ±3% ≈ 122 ≈ 140 P11/7-3F3-A160 250 ±5% ≈ 190 ≈ 80 P11/7-3F3-A250 1650 ±25% ≈ 1260 ≈ 0P 1 1 / 7 - 3 F 3 GRADE AL (nH) µe AIR GAP (µm) TYPE NUMBER 3E27 3400 ±25% ≈ 2600 ≈ 0 P11/7-3E27 GRADE B( m T )a t C O R EL O S S( W )a t H=2 5 0A / m ; f = 25 kHz; T = 100 °C f = 25 kHz; =2 0 0m T ; T = 100 °C f=1 0 0k H z ; =1 0 0m T ; T=1 0 0 °C f=1 0 0k H z ; = 200 mT; T = 100 °C f = 400 kHz; =5 0m T ; T = 100 °C Bˆ Bˆ Bˆ Bˆ
2008 Sep 01 937
P cores and accessories P11/7 INDUCTANCE ADJUSTERS General data PARAMETER SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C handbook, halfpage MGC151 6.2 2.55 M 1.4 2.13O 0.07 1.5 min 0.5 Fig.2 P11/7 inductance adjuster. Dimensions in mm. Inductance adjuster selection chart (applies to all types) Note 1. Maximum adjustment range. GRADE AL (nH) TYPES FOR LOW ADJUSTMENT ∆L/L(1) TYPES FOR MEDIUM ADJUSTMENT ∆L/L(1) TYPES FOR HIGH ADJUSTMENT ∆L/L(1) 3H3 100 −− ADJ-P9/P11-YELLOW 13 ADJ-P9/P11-BROWN 24
160 ADJ-P9/P11-YELLOW 8 ADJ-P9/P11-BROWN 15 ADJ-P9/P11-GREY 22
250 ADJ-P9/P11-BROWN 9 ADJ-P9/P11-GREY 14 −−
3D3 16 −− ADJ-P9/P11-YELLOW 19 −− 25 −− −− ADJ-P9/P11-YELLOW 30 40 −− −− ADJ-P9/P11-YELLOW 24 63 −− ADJ-P9/P11-YELLOW 18 −− 100 −− ADJ-P9/P11-YELLOW 11 −−
2008 Sep 01 938
P cores and accessories P11/7 COIL FORMERS General data CP-P11/7-1S coil former Winding data and area product for CP-P11/7-1S coil former PARAMETER SPECIFICATION Coil former material polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E45329 (R) Maximum operating temperature 155 °C, “IEC 60085”, class F NUMBER OF SECTIONS WINDING AREA (mm2) MINIMUM WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 4.8 3.1 22.6 77.8 CP-P11/7-1S dbook, full pagewidth CBW599 1.8 0.4 0.3 4.8 +0.1 8.9 0 −0.15.7 0 −0.1 4.2 0 −0.1 Fig.3 Coil former: CP-P11/7-1S. Dimensions in mm.
2008 Sep 01 939
P cores and accessories P11/7 General data for CP-P11/7-A coil former Winding data and area product for CP-P11/7-A coil former PARAMETER SPECIFICATION Coil former material acetal (POM), glass reinforced, flame retardant in accordance with “UL 94-HB”; UL file number E66288(R) Maximum operating temperature 105 °C NUMBER OF SECTIONS MINIMUM WINDING AREA (mm2) NOMINAL WINDING WIDTH (mm) AVERAGE LENGTH OF TURN (mm) AREA PRODUCT Ae x Aw (mm4) TYPE NUMBER 1 4.77 3.42 22.7 77.3 CP-P11/7-1S-A 22 × 2.00 2 × 1.52 22.7 2 x 32.4 CP-P11/7-2S-A 33 × 1.16 3 × 0.91 22.7 3 x 18.8 CP-P11/7-3S-A handbook, full pagewidth 4.8 min 4.2 max 1.6 min 5.65 8.9 max MGB528 Fig.4 Coil former: CP-P11/7-A. Dimensions in mm.
2008 Sep 01 940
P cores and accessories P11/7 MOUNTING PARTS General data ITEM REMARKS FIGURE TYPE NUMBER Tag plate material: phenolformaldehyde (PF), glass reinforced 5 TGP-P11/7-C flame retardant: in accordance with “UL 94V-0”; file number E41429 maximum operating temperature: 180 °C, “IEC 60085”, class H pins : copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20”, Part 2, Test Ta, method 1: 235 °C, 2 s Container copper-zinc alloy (CuZn), tin (Sn) plated 6 CON-P11/7 earth pins: presoldered Spring CrNi-steel 7 SPR-P11/7 spring force: ≈35 N when mounted Clamp spring steel, tin-plated 7 CLM/TP-P11/7 MGC153 2.54 1.2 3.1 12.4 max 2.5 4 2.4O 0.8O 2.4 6.9 10.16 10.16 0.8 1.35 1 0.15 Fig.5 P11/7 tag plate. Dimensions in mm.
2008 Sep 01 941
P cores and accessories P11/7 andbook, full pagewidth CBW600 mark 2 2.2 3.45.5 7.5 max. 12.45 max. 10 min. 12.45 max. Fig.6 Container: CON-P11/7. Dimensions in mm. handbook, halfpage MGC155 10.8 max 1 0.2 Fig.7 Spring: SPR-P11/7. Dimensions in mm.
2008 Sep 01 942
P cores and accessories P11/7 handbook, halfpage 0.25 MGB607 9.2 ± 0.25 12.2 ± 0.25 ± 0.25 7 ± 0.25 1.5 ± 0.25 7.5 ± 0.25 5 ± 0.5 12.5 ± 0.25 Fig.7 Clamp: CLM/TP-P11/7. Dimensions in mm.
2008 Sep 01 943
P cores and accessories P11/7 DATA SHEET STATUS DEFINITIONS DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains prelimin ary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.