STP10NK70ZFP_07 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

N-CHANNEL 700V - 0.75Ω - 8.6A - TO220-TO220FP Zener-Protected SuperMESH™ MOSFET General features I EXTREMELY HIGH dv/dt CAPABILITY I IMPROVED ESD CAPABILITY I 100% AVALANCHE TESTED I GATE CHARGE MINIMIZED I VERY LOW INTRINSIC CAPACITANCES I VERY GOOD MANUFACTURING REPEABILITY

Description

The SuperMESH™ series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications.

Applications

I HIGH CURRENT, HIGH SPEED SWITCHING I IDEAL FOR OFF-LINE POWER SUPPLIES, ADAPTOR AND PFC Order codes Package Internal schematic diagram Type VDSS R DS(on) ID Pw STP10NK70Z STP10NK70ZFP 700 V 700 V <0.85 Ω <0.85 Ω 8.6 A 8.6 A 110 W 35 W TO-220 TO-220FP Sales Type Marking Package Packaging STP10NK70Z P10NK70Z TO-220 TUBE STP10NK70ZFP P10NK70ZFP TO-220FP TUBE

1 Electrical ratings STP10NK70Z - STP10NK70ZFP

1 Electrical ratings

Table 1. Absolute maximum ratings Table 2. Thermal data Table 3. Avalanche characteristics

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic Table 6. Switching times

2 Electrical characteristics STP10NK70Z - STP10NK70ZFP

Table 7. Source drain diode Table 8. Gate-source zener diode integrity. These integrated Zener diodes thus avoid the usage of external components.

2.1 Electrical Characteristics (curves)

Figure 1. Safe Operating Area for TO-220 Figure 2. Thermal Impedanc for TO-220 Figure 3. Safe Operating Area for TO-220FP Figure 4. Thermal Impedance for TO-220FP Figure 5. Output Characteristics Figure 6. Transfer Characteristics

Figure 7. Transconductance Figure 8. Static Drain-Source on Resistance Figure 9. Gate Charge vs Gate -Source Figure 10. Normalized Gate Threshold Voltage Figure 11. Capacitance Variations Figure 12. Normalized on Resistance vs

3 T est circuits STP10NK70Z - STP10NK70ZFP

3 Test circuits

Figure 16. Switching Times Test Circuit For Figure 17. Gate Charge Test Circuit Figure 18. Test Circuit For Indictive Load Figure 19. Unclamped Inductive Waveform Figure 20. Unclamped Inductive Load Test

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

4 Package mechanical data STP10NK70Z - STP10NK70ZFP

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

A B D E H G F 123F2 L4L5 DIM. mm. inch A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 TO-220FP MECHANICAL DATA

5 Revision History STP10NK70Z - STP10NK70ZFP

5 Revision History

22-Aug-2005 2 Inserted Ecopack indication

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America