DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

SIDACtor® Protection Thyristors © 2010 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Fixed Voltage Enh. Single SLIC Protection Fixed Voltage Enhanced Single Port Series - MS-012

Description

The MS-012 packaged Fixed Voltage Enhanced Single Port Series are SIDACtor® devices designed to protect sensitive SLICs (Subscriber Line Interface Circuit) from damaging overvoltage transients. The series provides single port protection using a fixed voltage switching device for negative surges. Positive surges are routed though enhanced switching diodes to a ground reference. The series is also pin-to-pin compatible to industry standard programmable SO-8 SLIC protectors.

Electrical Characteristics

VDRM@ IDRM=5μA VS@100V/μs I H IS IT@VT VT@IT=1 Amps VF@25° Capacitance V min V max mA min mA max A max V max V max P0641DF-1E P0641F1E 58 77 150 800 1 5 5 See Capacitance Values Table P0721DF-1E P0721F1E 65 88 150 800 1 5 5 P0901DF-1E P0901F1E 75 98 150 800 1 5 5 P0991DF-1E P0991F1E 80 104 150 800 1 5 5 P1001DF-1E P1001F1E 85 110 150 800 1 5 5 P1101DF-1E P1101F1E 95 130 150 800 1 5 5 P1301DF-1E P1301F1E 120 160 150 800 1 5 5 P1701DF-1E P1701F1E 160 200 150 800 1 5 5 Features & Benefits diodes for positive voltage surges one package surged in excess of ratings footprint Pinout Agency Approvals Agency Agency File Number E133083 Schematic Symbol 4 5 (NC) (Tip) (Ground) (Ground) (Ring) (NC) (Tip) (Ring) Applicable Global Standards Level Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are uni-directional - VF < 8.5 volts @ 10 x 700μs Amps

SIDACtor® Protection Thyristors © 2010 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Fixed Voltage Enh. Single Series IPP ITSM di/dt 2x10μs 1.2x50μs/8x20μs 10x700/5x310μs 10x1000μs 600V RMS 1s A min A min A min A min A min Amps/μs max F 120 100 50 30 1 500 Surge Ratings Package Symbol Parameter Value Unit 6 5 MS-012 TJ 0QFSBUJOH+VODUJPO5FNQFSBUVSF3BOHF -40 to +150 °C TS 4UPSBHF5FNQFSBUVSF3BOHF -65 to +150 °C 30JA 5IFSNBM3FTJTUBODF+VODUJPOUP"NCJFOU 120 °C W Thermal Considerations 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Capacitance Values Part Number pF Tip-Ground, Ring-Ground pF Pin 1,8-4,5 Tip-Ring MIN MAX MIN MAX P0641DF-1E 40 90 20 45 P0721DF-1E 35 85 20 45 P0901DF-1E 30 80 20 40 P0991DF-1E 25 75 15 35 P1001DF-1E 25 75 15 35 P1101DF-1E 25 70 15 30 P1301DF-1E 20 70 15 30 P1701DF-1E 20 70 15 30 IH IDRM VDRM VT VS IS IT VF Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC 5IFEFWJDFNVTUJOJUJBMMZCFJOUIFSNBMFRVJMJCSJVNXJUI¡$< TJ < +150°C

SIDACtor® Protection Thyristors © 2010 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Fixed Voltage Enh. Single SLIC Protection -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1 Soldering Parameters Physical Specifications Environmental Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material 6-SFDPHOJ[FEFQPYZNFFUJOHnBNNBCJMJUZ classification 94V-0 High T emp Voltage Blocking 3BUFE7%3. (VDC ¡$PS PS IST.*-45% .FUIPE +&%&$ JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP DZDMFT.*-45% .FUIPE JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" +&%&$ +&4%" High T emp Storage +150°C 1008 hrs. MIL -STD-750 (Method 1031) +&%&$ +&4%" Low T emp Storage ¡$ IST Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS DZDMFT.*-45% .FUIPE +&%&$ JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" +&%&$ +&4%" Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) +150°C - Temperature Max (Ts(max)) +200°C - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) ¡$TFD.BY TS(max) to TL - Ramp-up Rate ¡$TFD.BY Reflow - Temperature (TL) (Liquidus) +217°C - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate ¡$TFD.BY Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C

SIDACtor® Protection Thyristors © 2010 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SLIC Protection Fixed Voltage Enh. Single Dimensions — MS-012 Dimension Inches Millimeters MIN MAX MIN MAX A 0.053 0.069 1 .35 1 .75 A1 0.004 0.010 0.10 0.25 A2 0.043 0.065 1 .25 1 .65 # 0.012 0.020 0.31 0.51 C 0.007 0.010 0.17 0.25 D 0.189 0.197 4.80 5.00 E 0.228 0.244 5.80 6.20 E1 0.150 0.157 3.80 4.00 e #4$ #4$ L 0.016 0.050 0.40 1 .27 #4$ Basic Spacing between Centers Packing Options Package Type Description Quantity Added Suffix Industry Standard D MS-012 SMT 8-pin 40*$5BQFBOE3FFM Pack 2500 /" EIA-481-D T ape and Reel Specifications — MS-012 o Recommended Soldering Pad Outline (Reference Only) Part Marking o XXXXXF1E XXXXX Part Number Code (Refer to Electrical Characteristics Table) Date Code Part Numbering CONSTRUCTION VARIABLE P: SIDACtor SINGLE ENHANCEDTYPE P -1E MEDIAN VOLTAGE PACKAGE TYPE xxx 1 DF IPP RATING 0.8 (0.03) 1.50 (.059) 4.0 (.158) 5.5 (.216) 2.0 (.079) 8.0 (.315) 6.4 (.252) 12.0 (.472) Direction of Feed ø MIN. Carrier T ape Embossment Cover Ta p e DIMENSIONS ARE: MILLIMETERS (INCHES) 0 MIN. MIN. 0.40 (0.016) 2.1 (.083) 1.55 (.061) 0.49 (12.4) 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). Direction of Feed o