P0080SB KEXIN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

www.kexin.com.cn 1 Thyristor Thyristor Surge Suppressors P0080SB ~ P5000SB ■ Features

  • Low voltage overshoot
  • Low on-state voltage
  • Low Capacitance
  • Does not degrade surge capability after multiple surge events within limit
  • Fails short circuit when surged in excess of ratings ■ Absolute Maximum Ratings Ta = 25℃ Parameter Symbol Rating Unit Non-Repetitive Peak on-state Current @ 50/60Hz ITSM 30 Critical Rate of rise of off-state Curent di/dt 500 A/us Thermal Resistance Junction to Ambient RthJA 90 ℃/W Junction Temperature TJ 150 Storage Temperature Range Tstg -40 to 150 ■ Electrical Parameters Parameter Definition IS Switching Current - maximum current required to switch to on state IDRM Leakage Current - maximum peak off-state current measured at VDRM IH Holding Current - minimum current required to maintain on state IT On-state Current - maximum rated continuous on-state current VS Switching Voltage - maximum voltage prior to switching to on stat VDRM Peak Off-state Voltage - maximum voltage that can be applied while maintaining off state VT On-state Voltage - maximum voltage measured at rated on-state current Off-state Capacitance - typical capacitance measured in off state IT IS IH IDRM VT VDRM VS -V +V A 2.108 2.348 4.699 4.064 5.588 5.080 3.937 3.302 2.108 1.905 4.12 3.92 2.65 2.45 5.59 5.39 2.10 2.30 1.270 0.762 0.203 0.051 0.305 0.152 Recommended Land Pattern DO-214AA(SMB) Unit: mm

www.kexin.com.cn2 Thyristor Thyristor Surge Suppressors P0080SB ~ P5000SB ■ Electrical Characteristics (Ta = 25℃, unless otherwise noted.) VDRM @IDRM=5 A VS @100V/ S VT @IT=2.2A IS IT IH @1MHzPart Number Marking V min V max V max mA max A max mA min pF min pF max P0080SB P008B 6 25 4 800 2.2 50 25 150 P0300SB P03B 25 40 4 800 2.2 50 15 140 P0640SB P06B 58 77 4 800 2.2 150 40 60 P0720SB P07B 65 88 4 800 2.2 150 35 60 P0900SB P09B 75 98 4 800 2.2 150 25 55 P1100SB P11B 90 130 4 800 2.2 150 30 50 P1300SB P13B 120 160 4 800 2.2 150 25 45 P1500SB P15B 140 180 4 800 2.2 150 25 40 P1800SB P18B 170 220 4 800 2.2 150 25 35 P2000SB P20B 180 220 4 800 2.2 150 20 35 P2300SB P23B 190 260 4 800 2.2 150 25 35 P2600SB P26B 220 300 4 800 2.2 150 20 35 P3100SB P31B 275 350 4 800 2.2 150 20 35 P3500SB P35B 320 400 4 800 2.2 150 20 35 P4000SB P40B 360 460 4 800 2.2 150 20 35 P4500SB P45B 400 540 4 800 2.2 150 20 35 P5000SB P50B 440 600 4 800 2.2 150 20 35 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional. ■ Surge Ratings 2/10 S1 8/20 S1 10/160 S1 10/560 S1 10/1000 S1 5/310 S1 2/10 S2 1.2/50 S2 10/160 S2 10/560 S2 10/1000 S2 10/700 S2 ITSM 50/60 Hz di/dt Series A min A min A min A min A min A min A min Amps/µs max B 250 250 150 100 80 100 30 500 Notes: 1. Current waveform in s 2. Voltage waveform in s - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C