DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Only One Name Means ProTek’Tion™ www.protekdevices.com05392.R0 11/12 Page 1

05392 P0402V05

ultRa low ca Pacitance esd PRotection com Ponent

descRiPtion

The P0402V05 is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only 0.15pF (I/O to GND) and is compatible with the ESD immunity requirements of IEC61000-4-2.

FeatuRes

  • Compatible with IEC 61000-4-2 (ESD): Air 15kV (Typical), 25kV(Max)
  • Compatible with IEC 61000-4-2 (ESD): Contact 8kV (Typical), 15kV(Max)
  • Low Leakage Current: 0.10µA
  • Fast Response Time
  • Protects One Bidirectional Line
  • Ultra Low Capacitance: 0.15 pF (Typical)
  • RoHS Compliant
  • REACH Compliant mechanical cha Racte Ristics
  • Molded Ceramic 0402 Package
  • Approximate Weight: 0.44 milligrams
  • Lead-Free Plating
  • Solder Reflow Temperature:
  • Lead-Free - Sn/Ag/Cu, 96/3.5/0.5: 260-270°C
  • 8mm Tape and Reel Per EIA Standard 481
  • Flammability Rating UL 94V-0

aPPlications

  • HDMI
  • DVI
  • Display Port
  • Unified Display Interface (UDI)
  • Mobile Display Digital Interface (MDDI)
  • Gigabit Ethernet
  • USB2.0 & USB3.0
  • IEEE 1394 Interface Pin conFiGuRation

Only One Name Means ProTek’Tion™ www.protekdevices.com05392.R0 11/12 Page 2 tyPical de Vice cha Racte Ristics maXimum RatinGs @ 25°c unless otherwise specified PaRamete R symBol Value units Operating Temperature TA -40 to 90 °C Storage Temperature TSTG -55 to 125 °C Solder Temperature - 10s TL 260 °C elect Rical cha Racte Ristics PeR line @ 25°c unless otherwise specified PaRt num BeR Rated stand-oFF VoltaGe Vwm Volts tyPical tRiGGeR VoltaGe (note 1) Vt Volts tyPical clam PinG VoltaGe (note 1) Vc Volts maXimum leaKaGe cuRRent (note 2) @Vwm id µa tyPical caPacitance @0V, 1mhz cJ pF P0402V05 5.0 350 35.0 0.10 0.15 notes 1. Trigger and Clamping Voltage are measured per IEC 61000-4-2, 8kV contact discharge method. 2. After reliability tests such as high temperature storage, temp cycle, continuous ESD strikes, the maximum leakage current is less than 10µA. CZ RZ ESD Tester DUT (Device Under Test)

450 Ohms

50 Ohm Coax

50 Ohm

CZ = 150pF RZ = 330 Ohms FiGuRe 1 esd clam PinG test

Only One Name Means ProTek’Tion™ www.protekdevices.com05392.R0 11/12 Page 3 tyPical de Vice cha Racte Ristics IPP 100% 90% 10% tr = 0.7ns to 1ns 30ns 60ns t FiGuRe 2 tyPical esd wa VeFoRm FiGuRe 3 esd waVe aFteR clam PinG

Only One Name Means ProTek’Tion™ www.protekdevices.com05392.R0 11/12 Page 4 solde R ReFlow in FoRmation PRinted ci Rcuit BoaRd Recommendations PaRamete R Value Pad Size on PCB 0.275mm Pad Shape Round Pad Definition Non-Solder Mask Defined Pads Solder Mask Opening 0.325mm Round Solder Stencil Thickness 0.150mm Solder Stencil Aperture Opening (Laser cut, 5% tapered walls) 0.330mm Round Solder Paste Type No Clean Pad Protective Finish OSP (Entek Cu Plus 106A) Tolerance - Edge To Corner Ball ±50µm Solder Ball Side Coplanarity ±20µm Maximum Dwell Time Above Liquidous (183°C) 60 seconds Soldering Maximum Temperature 270°C tP 30-60 seconds Ramp-up 15 seconds (minimize) solder-time 15-20 seconds Ramp-down Ramp-down solder melt (maximum temp) maximum solder Reflow (35-53°c above maximum solder melt temp) Ramp-up Preheat (stay Below Flux activation temp) temperature - °c Recommended non-solde R mas K deFined Pad illust Ration non-solder mask defined Pad 0.275mm dia. solder mask opening 0.325mm dia. solder stencil opening 0.330mm dia. Requi Rements Temperature: TP for Lead-Free (Sn/Ag/Cu): 260-270°C TP for Tin-Lead: 240-245°C Preheat time and temperature depends on solder paste and flux activa- tion temperature, component size, weight, surface area and plating.

Only One Name Means ProTek’Tion™ www.protekdevices.com05392.R0 11/12 Page 5 c0402 PacKaGe in FoRmation outline dimensions dim millimete Rs inches min maX min maX A 0.90 1.20 0.035 0.047 B 0.45 0.65 0.018 0.026 C 0.26 0.46 0.010 0.018 D 0.15 0.35 0.006 0.014 note s 1. Controlling dimension: millimeters. Pad layout dimensions dim millimete Rs inches nom nom A 0.6 0.024 B 0.50 0.020 C 0.90 0.035 notes 1. Controlling dimension: millimeters B A C BOTTOM VIEW SIDE VIEW A C B D

Only One Name Means ProTek’Tion™ www.protekdevices.com05392.R0 11/12 Page 6

oRdeRinG inFoRmation

Base PaRt num BeR lead FRee suFFiX taPe suFFiX qty/Reel Reel siZe tuBe qty P0402V05 N/A -T710 10,000 7” N/A This device is only available in a Lead-Free configuration. sPeciFications Reel dia. taPe width a0 B0 K0 d e F w P0 P2 P tmax notes 1. Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA-481. 3. Suffix - T710 = 7” Reel - 10,000 pieces per 8mm tape.

10 Pitches Cumulative

Tolerance on tape ± 0.2 WF EP2 P0D P T User Direction of Feed Top Cover Tape

Only One Name Means ProTek’Tion™ www.protekdevices.com05392.R0 11/12 Page 7 COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. comPany PRoFile In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of tran- sient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of con- sumer; industrial; automotive and other applications. contact us corporate headquarters

2929 South Fair Lane

Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Protek devices (asia Pacific) Pte. ltd.

8 Ubi Road 2, #06-19

Tel: +65-67488312 Fax: +65-67488313 web www.protekdevices.com