OVA-1089 ETC2 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Page <1> 19/06/12 V1.1 www.element14.com www.farnell.com www.newark.com OVA-10 Series Features:
- • High luminance
- • High operating temperature
- • Industry standard 7.62 mm square package Radiation Diagram Dimensions : Millimetres
Page <2> 19/06/12 V1.1 www.element14.com www.farnell.com www.newark.com Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. Electrical and Optical Characteristics at Ta = 25°C Maximum Ratings at Ta = 25°C Reverse Voltage (<100 µA) : 5 V D.C. Forward Current : 30 mA Pulse Current (Pulse Width of 0.1 ms, 1 / 10 Duty Cycle) : 100 mA Operating Temperature Range : -40 to +100°C Storage Temperature Range : -40 to +100°C Soldering Temperature Dip Soldering : 260°C for 5 seconds Soldering Temperature Hand Soldering : 350°C for 3 seconds LED Chip Lens Colours Dominant Wavelength (nm) at 20 mA Luminous Intensity (mcd) at 20 mA Forward Voltage (V) at 20 mA Viewing Angle 2θθ1/2 (°) Part Number Material Emitted Colours Brightness Minimum Typical Minimum Typical InGaN / SiC Blue Mega Water Clear 470 80 220 3.5 4.2
60 OVA-1089True Green 520 500 1,000
Red 630 270 600 2.2 2.6