LI-OV5640-MIPI-AF LEOPARD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Datasheet sections
Rev 1.0 Leopard Imaging Inc.
LI-OV5640-MIPI-AF SPECIFICATION Version History Version Description Release Date 1.0 First Release 9. Mar. 2014 2.0 Update Module to V2.0 13. Oct. 2017
LI-OV5640-MIPI-AF SPECIFICATION Key Information Module Part# LI-OV5640-MIPI-AF Module Size 36.25 mm (L) x 8.50 mm (W) x 5.50 mm(H) Sensor Type OV5640 Array Size QSXGA 2592 x 1944 Power Supply core 1.5V +/- 5% (with embedded 1.5V regulator) analog 2.6 ~ 3.0V (2.8V typical) I/O 1.8V / 2.8V Lens 1/4" Focus(F.NO) 2.6 View Angle 65°+/- 3° Image Area 3673.6 um x 2738.4 um Object distance 10cm-infinity Sensitivity TBD Pixel size 1.4 um x 1.4 um IR Cutter 650 nm Sensor Temperature Range Operating -30° C to 70° C Stable Image 0° C to 50° C Output Formats 8-/10-bit RGB RAW output Maximum Image Transfer Rate QSXGA (2592 x 1944): 15 fps; 1080P: 30 fps; 1280 x 960: 45 fps; 720P: 60 fps; VGA(640 x 480): 90 fps; QVGA(320 x 240): 120 fps Dynamic Range TBD Substrate FPC Power Requirement Active TBD Standby TBD Fixed Pattern Noise TBD Shutter Rolling shutter / Frame exposure Dark Current TBD Package Dimensions 5985 um x 5835 um
LI-OV5640-MIPI-AF SPECIFICATION Pin Assignment No. Name Pin type Description
1 STROBE I/O Strobe output or scan chain test mode input
2 AGND Ground Ground for analog circuit
3 SDA I/O SCCB data
4 A VDD Power Analog power
5 SCL Input SCCB input clock
6 RESET Input Reset (active low with internal pull-up resistor)
8 PWDN Input Power down (active high with internal pull-
down resistor) 9 NC 10 DVDD1.5V Power Power for digital core 11 DOVDD1.8V/2.8V Power Power for I/O circuit
12 MDP1 I/O DVP data output port 9/MIPI TX second data
13 XCLK Input System input clock
14 MDN1 I/O DVP data output port 8/MIPI TX second data
15 DGND Ground Digital Ground
16 MCP I/O DVP data output port 7/MIPI TX clock lane
18 MCN I/O DVP data output port 6/MIPI TX clock lane
20 MDP0 I/O DVP data output port 5/MIPI TX first data lane
22 MDN0 I/O DVP data output port 4/MIPI TX first data lane
23 AF-VCC2.8V Power Power for analog circuit
24 AF-AGND Ground Ground for analog circuit
LI-OV5640-MIPI-AF SPECIFICATION
Electrical Characteristics
- Absolute Maximum Ratings a. exceeding the absolute maximum ratings shown above invalidates all AC and DC electrical specifications and may result in permanent damage to the device. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. b. for negative voltage with respect to ground, VDD-A (-4.5V), VDD-C (-3V), VDD-IO (-4.5V) 2. Functional temperature a. sensor functions but image quality may be noticeably different at temperatures outside of stable image range b. image quality remains stable throughout this temperature range
LI-OV5640-MIPI-AF SPECIFICATION 3. DC Characteristics (-20°C < TA < 70°C)
LI-OV5640-MIPI-AF SPECIFICATION a. using the internal DVDD regulator is strongly recommended for minimum power down current b. based on DOVDD = 1.8V . 4. AC Characteristics a. AC Characteristics (TA = 25° C, VDD-A = 2.8V)
LI-OV5640-MIPI-AF SPECIFICATION b. Timing Characteristics a. for input clock range 6~27 MHz, the OV5640 can tolerate input clock jitter up to 1ns, for input clock range to 54MHz, the OV5640 can tolerate input clock jitter up to 500 ps b. b. if the PLL is bypassed, the delay from input clock to output clock is approximately 4~5 ns c. if using the internal PLL d. typical PCLK is 48 MHz when sensor output is smallersize (VGAYUV or below) or full size compression e. 96 MHz is for sensor RAW data output at 15 fps or YUV output at 7.5 fps. For higher speeds such as 5 megapixel Y UV @ 15 fps, OmniVision recommends using the MIPI two-lane interface. c. SCCB interface timing
LI-OV5640-MIPI-AF SPECIFICATION a. SCCB timing is based on 400KHz mode b. SCCB maximum speed is 400KHz when sensor master input clock (XVCLK) is greater than or equal to 13MHz. When XVCLK is less than 13 MHz, the maximum SCCB speed is less than 400 MHz (approximately XVCLK/32.5) 5. Format and frame rate
LI-OV5640-MIPI-AF SPECIFICATION