OPTIVA-OTS-ODLS-I-18GHZ EMCORE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

„ 40 µsec Delays Max „ Switching Option Available „ Smaller Size and Less Weight - Conserves Rack Space „ 0.05 - 18 GHz Bandwidth „ Flat Phase Response „ Minimal Triple-Transit Echoes „ Low Link Loss Options „ Low Temperature Sensitivity „ Manually and/or Computer Controlled System Design The Optiva platform includes a wide range fiber optic transport solutions for satellite and microwave communications applications including transparent inter- and intra-facility links, video transport, antenna remoting, radar system testing, phased array antennas, signal processing, electronic warfare systems and other high-dynamic-range applications. Optiva is a completely modular, hot-swappable platform with a variety of rack- mount or compact tabletop, or wall-mountable enclosures are available. The

3 RU 19” rack-mount, fan-cooled enclosure (Model OT-CC-16F) for the OTS-ODLS

internal fiber delay line system can support up to 16 insert cards and utilizes two dual-redundant, hot-swappable, 200 watt power supplies.

MICROWAVEDATASHEET | APRIL 2014 © 2014 EMCORE Corporation | REV 2014.04 satcom-sales@emcore.com www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. +1 626-293-3400 Model Input Voltage (VAC) Wattage (@+50°C) OTS-ODLS-I 120 / 240 200 W Power Consumption - Max Parameter Symbol Min Max Units Operating Temperature TOP -10 50 °C Operating Humidity, Maximum Non-Condensing - - 95 % Operating Altitude, Above Sea Level - - 6000 1828 ft m Storage Temperature TSTG -40 70 °C Storage Humidity, Maximum Non-Condensing - - 95 % Storage Altitude, Above Sea Level - - 50,000 15,240 ft m Environmental Specifications Parameter Value Unit Comments Frequency Range 0.05-18 GHz Delay Range 3 to < 40 msec Delay Tolerance < +/-2 % Phase Stability rφ < 2o per 10 sec -- Typical for 40 ms DLS RF Input Level 0 to 16 dBm Typical Deviation from Linear Phase < 10° -- Typical (up to 18 GHz) Amplitude Flatness < +/-3 dB Amplitude Linearity < +/-1 dB Gain (@ RF in = 0 dBM)* < -10 dB Return Loss/VSWR RL > 15 < 1.43:1 dB Spur Level < -60 dBc Input 1 dB Compression Point > +16 dBm 2nd Harmonic (@ RFin = 0 dBm) < -45 dBc Noise Figure < 70 dB RF Connectors SMA-F -- Typical Specifications Typical RF Characteristics/Standard Features measured with OTS-2 Tx and OTS-2 Rx Enclosure Options Optiva OTS-ODLS 18 GHz, 40 µs max Internal Fiber Delay Line System OT-CC-16F *0 dB gain is based upon a single 40 µs delay spool and receiver with 35 dB post amplifier. Actual system gain will vary based upon system requirements. Block Diagram - Four Delays System Option Delay Value 1 = IN1OUT1IN2OUT2 Delay Value 2 = IN1DELAY1OUT1IN2OUT2 Delay Value 3 = IN1OUT1IN2DELAY2OUT2 Delay Value 4 = IN1DELAY1OUT1IN2DELAY2OUT2 Other delay configurations available

MICROWAVEDATASHEET | APRIL 2014 © 2014 EMCORE Corporation | REV 2014.04 satcom-sales@emcore.com www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. +1 626-293-3400 Order Information Delay System OTS-ODLS-I-18-V/XX-Y-ZZ „ When ordering replace “V” with one of the Switching Options „ When ordering replace “XX” with one of the Optical Connector Options „ When ordering replace “Y” with one of the RF Output Options „ When ordering replace “ZZ” with one of the Gain Options „ Delay Time Options* must be defined by Customer Switching Options (0 to 4) “V” Optical Connector Options “XX” RF Output Options “Y” Link Gain RF Amplifier Options“ZZ” Standard: 0 = no Switching Optional: 1 = One Delay 2 = Two Delays 3 = Three Delays 4 = Four Delays Standard: SA = SC / APC Optional: FA = FC / APC EA = E2000 / APC 1 = Fixed Output EDFA in Rx 2 = Variable Output No EDFA in Rx 00 = No RF Amp 01 = RF Amp Delay Time Options* (50 ns to 40 µs) Standard:

1 Delay = XXXXXX

Optional: 1st Delay = XXXXXX 2nd Delay = XXXXXX 3rd Delay = XXXXXX 4th Delay = XXXXXX Laser Safety This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser product. This device has been classified with the FDA/CDRH under accession number 0220191. All versions of this laser are Class 1M laser product, tested according to IEC 60825-1:2007 / EN 60825-1:2007. An additional warning for Class 1M laser products. For diverging beams, this warning shall state that viewing the laser output with certain optical instruments (for example: eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard. For collimated beams, this warning shall state that viewing the laser output with certain instruments designed for use at a distance (for example: telescopes and binoculars) may pose an eye hazard. Wavelength = 1.3/1.5 µm. Maximum power = 30 mW. *Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. *IEC is a registered trademark of the International Electrotechnical Commision. Optiva OTS-ODLS 18 GHz, 40 µs max Internal Fiber Delay Line System