EKI-1361 ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Link any serial device to an IEEE 802.11a/b/g/n network Supports 802.11n MIMO 2T2R WLAN transmission rates up to 300 Mbps Supports secure access with WEP , WPA/WPA2-Personal, WPA/WPA2- Enterprise Provides COM port redirection, TCP , UDP , and pair connection modes Supports up to 921.6 kbps and any baud rate setting Provides web-based configuration and Windows utility Allows a maximum of five hosts to access one serial port Modbus TCP and Modbus RTU support Selective dual band 2.4 or 5 GHz Specifications Ethernet Communications Port Type RJ45 No. of Ports 1 Speed 10/100/1000 Mbps Wireless LAN Communications Compatibility IEEE 802.11a/b/g/n Speed Up to 300Mbps Network Mode Infrastructure Antenna Connector Reverse SMA No. of Antenna 2 (supports 2T2R) Free Space Range Open space 100 m Wireless Security WEP , WPA/WPA2-Personal, WPA/WPA2-Enterprise Serial Communications Port Type RS-232/422/485, software selectable No. of Ports EKI-1361: 1 EKI-1362: 2 Port Connector DB9 male Data Bits 5, 6, 7, 8 Stop Bits 1, 1.5, 2 Parity None, Odd, Even, Space, Mark Baud Rate 50 bps ~ 921.6 kbps, any baud rate setting Serial Signals RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485: Data+, Data-, GND Protection 15 KV ESD for all signals Software OS Support 32-bit/64-bit Windows XP/Vista/7/8/8.1/10, Windows Server 2003/2008/2008 R2/2012/2012 R2 and Linux Utility Software Advantech EKI Device Configuration Utility Operation Modes Access Point mode/Station mode EKI-1361/2 COM port redirection mode (Virtual COM) TCP/UDP server (polling) mode TCP/UDP client (event handling) mode EKI-1361/2-MB Modbus RTU Master/Slave Modbus ASCII Master/Slave Configuration Windows utility, Telnet console, Web Browser Protocol ARP , ICMP , IPv4, IPv6, TCP , UDP , BOOTP , DHCP Client, Auto IP , Telnet, DNS, SNMP , HTTP , SMTP , SNTP Mechanics Enclosure Metal shell with solid mounting kits Mounting DIN-rail, Wall Dimensions (W x H x D) 30 x 140 x 95 mm (1.18" x 5.51" x 3.74") Weight 0.5 Kg General LED Indicators System: Power, System Status WLAN: Quality, Link/Active LAN: Link/Active Serial: Tx, Rx Reboot Trigger Built-in WDT (watchdog timer) Power Requirements Power Input 12 ~ 48 VDC, redundant dual inputs Power Connector Terminal block Power Consumption EKI-1361: 8W EKI-1362: 9W Environment Operating Temperature -40 ~ 75°C (-40 ~ 166°F) Storage Temperature -40 ~ 80 °C (-40 ~ 176 °F) Operating Humidity 10 ~ 95% RH Regulatory Approvals EMC CE, FCC Part 15 Subpart B (Class B) Introduction The EKI-1361 and EKI-1362 wireless serial device servers bring RS-232/422/485 to wireless LAN. They allow nearly any device with a serial port to connect and share a wireless LAN. The EKI-1361 and EKI-1362 provide a quick, simple, and cost-effective way to bring remote management and data accessibility to thousands of devices that cannot otherwise connect to a network. With the EKI-1361 and EKI-1362, your existing serial devices can be used with the most common operating systems without the need to write special drivers. Moreover, you can make serial devices communicate directly with other devices peer-to-peer, thus eliminating the need for intermediate host PCs and software programming. This saves a considerable amount of cost and effort. Additionally, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side with bilateral data transmission. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automation, SCADA, transportation, and more. EKI-1361 EKI-1362 EKI-1361-MB EKI-1362-MB 1-Port RS-232/422/485 to 802.11a/b/g/n WLAN Serial Device Server 2-Port RS-232/422/485 to 802.11a/b/g/n WLAN Serial Device Server 1-Port RS-232/422/485 to 802.11a/b/g/n WLAN Modbus Gateway 2-Port RS-232/422/485 to 802.11a/b/g/n WLAN Modbus Gateway EKI-1361 EKI-1362 All product specifications are subject to change without notice. Last updated: 28-Oct-2020
www.advantech.com/productsOnline Download Panel Cut-out Dimensions: 30 x 140 x 104 mm (1.18" x 5.51" x 4.09") Panel Cut-out Dimensions: 30 x 140 x 104 mm (1.18" x 5.51" x 4.09") EKI-1361 EKI-1362 Dimensions Unit: mm [inch] EKI-1361 EKI-1362 EKI-1361-MB EKI-1362-MB Wireless Transmission Rates Receiver Sensitivity 802.11a -75 dBm@54Mbps 802.11b: -85 dBm@11Mbps 802.11g: -75 dBm@54Mbps 802.11n HT20(2.4GHz): -74 dBm@MCS7 802.11n HT40(2.4GHz): -71 dBm@MCS7 802.11n HT20(5GHz): -72 dBm@MCS7 802.11n HT40(5GHz): -70 dBm@MCS7 802.11ac VHT80 -61 dBm @MCS9 50.70 [2.00] 104 [4.09] 30 [1.18] 30 [1.18] 11 [0.43] 69 [2.72] 99.20 [3.91] 123 [4.84] 140 [5.51] 140 [5.51] 66 [2.60] 8 [0.31 10.30 [0.41 14.53 [0.57] [1.77] [1.85] [1.89] 15 [0.59] 50.70 [2.00] 104 [4.09] 30 [1.18] 30 [1.18] 11 [0.43] 33 [1.30] 69 [2.72] 99.20 [3.91] 123 [4.84] 140 [5.51] 140 [5.51] 66 [2.60] 8 [0.31 10.30 [0.41 14.53 [0.57] [1.77] [1.85] [1.89] 15 [0.59]
Ordering Information
EKI-1361 1-port 802.11a/b/g/n WLAN Serial Device Server EKI-1362 2-port 802.11a/b/g/n WLAN Serial Device Server EKI-1361-MB 1-port 802.11a/b/g/n WLAN Modbus Gateway EKI-1362-MB 2-port 802.11a/b/g/n WLAN Modbus Gateway OPT1-DB9 D-Sub9 to Terminal Converter