OPT-1250A1F1R DELTA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
z Industry Standard 1 x 9 Footprint and duplex SC Connector interface z Compliant with Specifications for IEEE 802.3z Gigabit Ethernet z OPT-1250Bxxx compliant with the 1.0625GBd Fibre Channel 100-SM-LC-L FC-PI Rev.13 z OPT-1250Axxx compliant with the 1.0625GBd Fibre Channel FC-PI 100-M5-SN-I Rev.13 z Single +3.3V or 5V Power Supply z PECL or TTL Receiver Signal Detect Indicator z Wave Solderable and Aqueous Washable z Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2
Description
The OPT-1250xxxx series from DELTA is a 1X9 transceiver module designed expressly for high-speed communication applications that require rates of up to 1.25Gbit/sec. It is compliant with the Gigabit Ethernet standards as well as 1x Fiber channel standards. The OPT-1250xxxx transceivers are provided with the SC receptacle that is compatible with the industry standard SC connector. The post-amplifier of the OPT-1250xxxx also includes a Signal Detect circuit that provides a PECL or TTL logic-Low output when an unusable optical signal level is detected. (see order information) The OPT-1250xxxx transceiver is a Class 1 eye safety product. The optical power levels, under normal operation, are at eye safe level.
Applications
z Gigabit Ethernet/Fast Ethernet z Switched backplane applications Performance OPT-1250AxFxx: z 850nm VCSEL, up to 500m in 50/125DŽm MMF z 850nm VCSEL, up to 220m in 62.5/125DŽm MMF OPT-1250B2I1x: z 1310nm FP laser, Data Link up to 5km in 9/125um SMF OPT-1250BxQxx: z 1310nm FP laser, Data Link up to 10km in 9/125um SMF z 1310nm FP laser, up to 550m in 50/125DŽm MMF z 1310nm FP laser, up to 550m in 62.5/125DŽm MMF
DELTA ELECTRONICS, INC. 2 Sep., 2006 Rev. 0G www.deltaww.com Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Lead Soldering Temperature T SOLD 260 ºC Lead Soldering Time t SOLD 10 sec. Supply Voltage V CC 0 6 V Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Unit Note Ambient Operating Temperature T A 0 70 ºC 1 Supply Voltage OPT-1250x1xx OPT-1250x2xx, OPT-1250x4xx VCC 4.75 3.135 5.25 3.465 V Note: See ordering information for detail
Electrical Characteristics
(At recommended ambient operating temperature, TA and supply voltage, VCC) Parameter Symbol Min. Typ. Max. Unit Note Total Supply Current I CCT 300 mA Transmitter Transmitter Data Input Voltage-Low V IL-VCC -1.810 -1.475 V 1 Transmitter Data Input Voltage-High V IH-VCC -1.165 -0.880 V 1 Transmitter Differential Input Voltage V DT 0.3 1.6 V 2 Receiver Data Output Voltage-Low V OL-VCC -1.95 -1.62 V 1 Data Output Voltage-High V OH-VCC -1.045 -0.74 V 1 Receiver Differential Output Voltage V DR 0.5 0.7 1.2 V 2 Output Data Rise/Fall Time t r/tf 0.4 ns 3 PECL SD Output LOW level output voltage HIGH level output voltage VSDH-VCC VSDL-VCC -1.84 -1.1 -1.60 -0.9 V 4 TTL SD Output LOW level output voltage HIGH level output voltage VSDH VSDL VCC 0.8 V 5 Notes: 1. For OPT-1250A1F1x, OPT-1250A4F1x , OPT-1250B2I1x, OPT-1250B2Q1x and OPT-1250B1Q1x. 2. For OPT-1250A2F2x and OPT-1250B4Q2x. 3. These are 20%~80% values 4. For OPT-1250A1F1x, OPT-1250A2F2x, OPT- 1250B2I1x, OPT-1250B1Q1x and OPT-1250B2Q1x 5. For OPT-1250A4F1x and OPT-1250B4Q2x
DELTA ELECTRONICS, INC. 3 Sep., 2006 Rev. 0G www.deltaww.com Single Mode Transceiver (OPT-1250B2I1x, OPT-1250B1Q1x, OPT-1250B2Q1x, OPT-1250B4Q2x) (At recommended ambient operating temperature, T A and supply voltage, V CC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 9/125um SMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) OPT-1250BxIx OPT-1250BxQx PO -12 -9.5 dBm Optical Extinction Ratio ER 9 dB Center Wavelength ǃC 1270 1310 1355 nm Spectral Width (RMS) NJ 2.8 nm Optical Rise/Fall time tr/tf 0.26 ns 1 Relative Intensity Noise RIN -120 dB/Hz Output Eye Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) P IN -19 dBm 2 Input Optical Wavelength ǃ 1310 nm Signal Detect-Asserted (Avg.) P A -19 dBm Signal Detect-De-asserted (Avg.) P D -35 dBm Signal Detect-Hysteresis P A-PD 0.5 dB Receiver saturation power P SAT -3 dBm Notes: 6. These are 20%~80% values 7. The sensitivity is pr ovided at a BER of 1×10 -10 or better with an input signal consisting of 1250Mb/s, 27-1 PRBS. Mask of the eye diagram for the optical transmit signal
DELTA ELECTRONICS, INC. 4 Sep., 2006 Rev. 0G www.deltaww.com Multi-Mode Series Transceiver (OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250A4F1x) (At recommended ambient operating temperature, T A and supply voltage, V CC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 62.5/125um MMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) P O -9.5 -4 dBm Optical Extinction Ratio ER 9 dB Center Wavelength ǃC 830 850 860 nm Spectral Width (RMS) NJ 0.85 nm Optical Rise/Fall time tr/tf 0.26 ns 1 Relative Intensity Noise RIN -117 dB/Hz Output Eye Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) P IN -17 dBm 2 Input Optical Wavelength ǃ 850 nm Signal Detect-Asserted (Avg.) P A -17 dBm Signal Detect-De-asserted (Avg.) P D -30 dBm Signal Detect-Hysteresis P A-PD 0.5 dB Receiver saturation power P SAT -4 dBm Notes: 8. These are 20%~80% values 9. The sensitivity is pr ovided at a BER of 1×10 -10 or better with an input signal consisting of 1250Mb/s, 27-1 PRBS. Mask of the eye diagram for the optical transmit signal
DELTA ELECTRONICS, INC. 5 Sep., 2006 Rev. 0G www.deltaww.com Pin Out Table PIN Symbol Functional description
1 GND Receiver Signal Ground
2 RD (+) Receiver Data Out (LVPECL)
3 RD (-) Receiver Data Out Bar (LVPECL)
4 SD Receiver Signal Detect (LVPECL or TTL)
5 VccR Receiver Power Supply,
6 VccT Transmitter Power Supply
7 TD (-) Transmitter Data In Bar (LVPECL)
8 TD (+) Transmitter Data In (LVPECL)
9 GND Transmitter Signal Ground
Pin Descriptions: Pin 1 Receiver Signal Ground, GND Directly connect these pins to the ground plane. Pin 2 Receiver Data Out (LVPECL), RD (+) Receiver Data output (LVPECL), RD (+). Pin 3 Receiver Data Out Bar (LVPECL), RD (-) Receiver Data output (LVPECL), RD (-). Pin 4 Receiver Signal Detect (LVPECL/TTL), SD PECL/TTL logic family. Normal Operation: Logic “1” Output Fault Condition: Logic”0” Output. Pin 5 Receiver Power Supply, VccR Provide +3.3/5V dc power supply. Pin 6 Transmitter Power Supply, VccT Provide +3.3/5V dc power supply. Pin 7 Transmitter Data In Bar (LVPECL), TD (-) Transmitter Data Input (LVPECL), TD (-) Pin 8 Transmitter Data In (LVPECL), TD (+) Transmitter Data Input (LVPECL), TD (+) Pin 9 Transmitter Signal Ground, GND Directly connect these pins to the ground plane.
DELTA ELECTRONICS, INC. 6 Sep., 2006 Rev. 0G www.deltaww.com TX-VCC RX-VCC 9876543 1 2 Transceiver Top View RD+ RD- SD Test Equipment R1=270 Ohm(3.3V, PECL), 510 Ohm (5V, PECL)NC(TTL) C1=C2=C3=C4=C6=C8=100 nF C5=100 uF C7=C9=10 uF L1=L2=1 uH or ferrite inductor TD+ TD- C5 C6 TX-VCC VCC RX-VCC Recommend Circuit Schematic for Internal DC Coupled Transceivers Recommend Circuit Schematic for Internal AC Coupled Transceivers 987654321 R5 R6 R7 TX-VCC TX-VCC TD+ TD- RX-VCC TX-GND RX-GND Transceiver Top Niew C5 C6 C7 VCC TX-VCC RX-VCC R1=R3=82 Ohm (3.3V), 68 Ohm (5V) R2=R4=130 Ohm (3.3V), 191 Ohm (5V) R5=270 Ohm (3.3V, PECL), 510 Ohm (5V, PECL) R6=R7=274 Ohm (5V) L1=L2=1 uH or ferrite inductor C2 C4 Test Equipment RD+ RD- SD NC (TTL) C1=C2=C3=C4=C6=C8=100 nF C5=100 uF C7=C9=10 uF
DELTA ELECTRONICS, INC. 7 Sep., 2006 Rev. 0G www.deltaww.com Package Outline Drawing (without shielding) Package Outline Drawing (A type shielding)
DELTA ELECTRONICS, INC. 8 Sep., 2006 Rev. 0G www.deltaww.com Package Outline Drawing (B type shielding) Package Outline Drawing (C type shielding)
DELTA ELECTRONICS, INC. 9 Sep., 2006 Rev. 0G www.deltaww.com Regulatory Compliance Feature Reference Performance Electromagnetic Interference (EMI) FCC Class B EN 55022 Class B (CISPR 22A) Radio Frequency Electromagnetic Field EN 61000-4-3 IEC 1000-4-3 Electrostatic Discharge to the Duplex LC Receptacle EN 61000-4-2 IEC 1000-4-2 IEC 801.2 Electrostatic Discharge to the Electrical Pins MIL-STD-883E Method 3015.7 (1) Satisfied with electrical characteristics of product spec. (2) No physical damage Eye Safety US FDA CDRH AEL Class 1 EN 60950: 2000 EN 60825-1: 1994+A11+A2 EN 60825-2: 2000 CDRH File # 0321539-00 TUV Certificate No. R50032471 Component Recognition Underwriters Laboratories and Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment UL File # E239394
DELTA ELECTRONICS, INC. 10 Sep., 2006 Rev. 0G www.deltaww.com
Ordering information
X1: Fiber A: Multi-mode 850nm B: Single-mode 1310nm X 5: RoHS Compliant Blank: Non-RoHS Compliant R: RoHS Compliant X2: Power Supply Voltage and SD Level 1: 5.0V, PECL SD Level 2: 3.3V, PECL SD Level 4: 3.3V, TTL SD Level X 6: Shielding Type Blank: Plastic housing A: A type shielding B: B type shielding C: C type shielding X 3: X 4: Distance F: 500m, 50/125DŽm MMF I: 5km, 9/125DŽm SMF Q: 10km, 9/125DŽm SMF Data Coupling 1: 1x9SC DC/DC 2: 1x9SC AC/AC X7: Temperature Blank: 0 to +70 degree C H: -10 to + 85 degree C