OP905 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

OP905, OP906 © TT electronics plc Issue A 08/2016 Page 1 OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: Each OP905 and OP906 device consists of a PIN silicon photodiode molded in a clear epoxy package that allows spectral response from visible to infrared light wavelengths. The T-1 package style is ideal for space-limited applicaƟons. Both devices have a narrow receiving angle, which provides excellent on-axis coupling. Both are also 100% producƟon tested using infrared light for close correlaƟon with OPTEK’s GaAs and GaAiAs emiƩers. Please refer to ApplicaƟon BulleƟns 208 and 210 for addiƟonal design informaƟon and reliability (degradaƟon) data. Applications:

  • Non-contact reflecƟve object sensor
  • Assembly line automaƟon
  • Machine automaƟon
  • Machine safety
  • End of travel sensor
  • Door sensor Features:
  • Clear epoxy package
  • Linear response vs. irradiance
  • Fast switching Ɵme
  • Narrow receiving angle
  • T-1package style
  • Small package style ideal for space-limited applicaƟons OP905 OP906 Part Number Sensor Viewing Angle Lead Length OP905 Photodiode 95° 0.50" OP906 Ordering InformaƟon OP906 CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK'S molded plasƟcs. OP905 Pin # Diode

1 Anode

2 Cathode

[MILLIMETERS]DIMENSIONS ARE IN: INCHES [MILLIMETERS]DIMENSIONS ARE IN: RoHS

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. PIN Silicon Photodiode OP905, OP906 Issue A 08/2016 Page 2 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Reverse Breakdown Voltage 60 V Storage & OperaƟng Temperature Range -40° C to +100° C Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] 260° C (1) Reverse Breakdown Voltage 60 V Power DissipaƟon 100 mW(2) Electrical Specifications Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS IL Reverse Light Current OP905 OP906 µA VR = 5 V, EE = 0.50 mW/cm2 (3) ID Reverse Dark Current - 1 60 nA VR = 30 V, EE = 0(4) V(BR) Reverse Breakdown Voltage 60 - - V IR = 100 μA VF Forward Voltage - - 1.2 V IF = 1 mA CT Total Capacitance - 4 - pF VR = 20 V, EE = 0, f = 1.0 MHz tr Rise Time - 5 - ns tf Fall Time - 5 - VR = 20 V, λ = 850 nm, RL = 50 Ω Notes: (1) RMA flux is recommended. DuraƟon can be extended to 10 seconds maximum when flow soldering. A maximum of 20 grams force may be applied to leads when soldering. (2) Derate linearly 1.67 mW/° C above 25° C. (3) Light source is an un filtered GaAs LED with a peak emission wavelength of 935 nm and a radiometric intensity level which varies less than 10% over the enƟre lens surface of the photodiode being tested. (4) Calculate the typical dark cu rrent in nA using the formula I D = 10(0.042T A -1.5) where TA is ambient temperature in °C.

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. PIN Silicon Photodiode OP905, OP906 Issue A 08/2016 Page 3 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Performance OP905

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. PIN Silicon Photodiode OP905, OP906 Issue A 08/2016 Page 4 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Performance OP906