OP602 TTELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
High Reliability NPN Silicon Phototransistor OP604TXV, OP604S Obsolete (OP602(TX,TXV), OP603 (TX, TXV), OP604TX) © TT electronics plc Rev D 07/2022 Page 1 TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: Each device in the OP600 high reliability series consists of a high-reliability NPN silicon phototransistor that is mounted in a glass-lensed miniature hermetically sealed “pill” package with an 18° half angle, as measured from the optical axis to the half-power point. After electrical testing by manufacturing, devices are processed to OPTEK’s 100 percent screening program, which is patterned after MIL-PRF-19500. Components in the high reliability OP600 series are mechanically and spectrally matched to the OP223 and OP224 high reliability series of infrared emitting diodes. TXV and S devices are processed to OPTEK’s military screening program patterned after MIL-PRF-19500. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) and to Applications:
- Non-contact reflective object sensor
- Assembly line automation
- Machine automation
- Machine safety
- End of travel sensor
- Door sensor Features:
- Miniature hermetically sealed package
- Wide range of collector currents
- Ideal for direct mounting to PCBoard
- TXV & S devices are processed to MIL-PRF-19500 Part Number Light Current IC(ON) (mA) Min / Max VCE Typ / Max Input Power EE (mW/cm2) Viewing Angle OP602TX Obsolete 2.00 / 5.00 5 / 50 20.0 35° OP602TXV Obsolete OP603TX Obsolete 4.00 / 8.00 OP603TXV Obsolete OP604S 7.00 / NA OP604TX Obsolete OP604TXV Pin # Sensor
1 Collector/Cathode
2 Emitter/Anode
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. High Reliability NPN Silicon Phototransistor OP604TXV, OP604S Obsolete (OP602(TX,TXV), OP603 (TX, TXV), OP604TX) TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Rev D 07/2022 Page 2 Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -65° C to +150° C Operating Temperature Range -55° C to +125° C Collector-Emitter Voltage 50 V Emitter-Collector Voltage 7.0 V Soldering Temperature (5 seconds with soldering iron)(1) 260° C Power Dissipation(2) 50 mW Electrical Characteristics (TA = 25° C unless otherwise noted) Input Diode SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS IC(ON) On-State Collector Current OP604TXV, OP604S 7 - - mA VCE = 5.0 V, EE = 20 mW/cm2(3)(4) ICEO Collector Dark Current - - 25 nA VCE = 10.0 V, EE = 0 - - 100 µA VCE = 30.0 V, EE = 0 TA = 100° C V(BR)CEO Collector-Emitter Breakdown Voltage 50 - - V IC= 100 µA, EE = 0 V(BR)ECO Emitter-Collector Breakdown Voltage 7 - - V IC= 100 µA, EE = 0 VCE(SAT) Collector-Emitter Saturation Voltage - - 0.4 V IC = 0.4 mA, EE = 20 mW/cm2(3)(4) tf Rise Time - - 20 VCC = 30 V, IC = 1.00 mA, tr Fall Time - - 20 Notes: (1) Refer to Application Bulleting 202, which discusses proper techniques for soldering pill -type devices to PCBoards. (2) No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when wave soldering. (3) Derate linearly 0.5 mW/° C above 25° C. (4) Junction temperature maintained at 25° C. (5) Light source is an unfiltered tungsten lamp operating at CT=2870 K or equivalent source. Electrical Specifications