OP207CL TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

© TT electronics plc Issue A 7/2018 Page 1 OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: The OP207CL is a high power IR LED designed for encoder applications. The LED features a small foot print, low profile for a 7 mm beam diameter. Radiance is a collimated, narrow beam emission pattern provides on -axis intensity for excellent coupling efficiency for encoder applications. Applications:  Linear & Rotary Encoder  Optical Sensors Switches  Long Range Light Barriers  Optical Scanning and Edge Sensing  Automatic Control Systems Features:  SMD Configuration  Emission Spot Size is 7 mm diameter  High Power Output with Parallel Rays  Uniform Distribution  Emitter Source for Encoder Applications Package Dimensions RoHS

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OP207CL Issue A 7/2018 Page 2 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -40o C to +105o C Operating Temperature Range -40o C to +105o C Reverse Voltage 10 V Continuous Forward Current 100 mA Power Dissipation(1) 190 mW Peak Package Body Temperature (Tp) (2) 200°C Electrical Specification Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS PO Total Output Radiant Power 10.0 - mW IF = 50 mA Sd Spot Light Diameter 7.0 mm IF = 50 mA , measured at 1.5mm from lens tip ½ θHP Half Intensity Beam Angle 2.25 Degree IF = 50 mA λP Wavelength at Peak Emission 840 855 870 nm IF = 100 mA VF Forward Voltage 1.5 1.9 V IF = 50 mA IR Reverse Leakage Current - 10 µA VR = 5.0V tr, tf Rise Time, Fall Time 22 ns IF(PEAK) = 50mA, PW = 10µs, 10% D.C. Notes: 1. Derate linearly at 3.42 mW/°C above 60°C. 2. Product designed for hand soldering only. Use SAC solder. No clean flux recommended. Recommended Land Pattern Tolerance ± .005 inches

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OP207CL Issue A 7/2018 Page 3 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com 1.20 1.30 1.40 1.50 1.60 10 20 30 40 50 60 70 80 90 100 Forward Voltage - VF (V) Forward Current -IF(mA) Forward Voltage vs Forward Current 1.20 1.40 1.60 1.80 0 20 40 60 80 Forward Voltage - VF (V) Ambient Temperature (°C) Forward Voltage vs Temperature IF=100mA 0.0 0.2 0.4 0.6 0.8 1.0 1.2 20 40 60 80 Relative Intensity Ambient Temperature (°C) Relative Intensity vs Temperature Characteristic Curves (typical) 20% 40% 60% 80% 100% -25 -20 -15 -10 -5 0 5 10 15 20 25 Relative Output vs Angular Displacement 0.2 0.4 0.6 0.8 10 20 30 40 50 60 70 80 90 100 Relative Radiant Intensity Forward Current -IF(mA) Relative Radiant Intensity vs. Forward Current 100 120 0 50 100 IF(mA) Ambient Temperature ( °C) Maximum Forward Current vs Ambient Temperature Rthja=280 °C/W (OP207CL s oldered to a PCB)

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OP207CL Issue A 7/2018 Page 4 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Characteristic Curves (typical) IR Camera Image of Emission Spot 5.5 6.5 7.5 0 5 10 15 20 25 Emission Spot Diameter (mm) Distance from Lens Tip (mm) Emission Spot Diameter vs. Distance from Lens Tip