OP200AZ

OP200_17 AD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 17

Technical content

OP200* PRODUCT PAGE QUICK LINKS Last Content Update: 03/28/2017 COMPARABLE PARTS View a parametric search of comparable parts. DOCUMENTATION Application Notes

• AN-649: Using the Analog Devices Active Filter Design Tool Data Sheet
• OP200: Dual Low Offset, Low Power Operational Amplifier Data Sheet
• OP200: Military Data Sheet TOOLS AND SIMULATIONS
• OP200 SPICE Macro Models DESIGN RESOURCES
• OP200 Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints DISCUSSIONS View all OP200 EngineerZone Discussions. SAMPLE AND BUY Visit the product page to see pricing options. TECHNICAL SUPPORT Submit a technical question or find your regional support number. DOCUMENT FEEDBACK Submit feedback for this data sheet. This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.

Rev. G | Page 2 of 16 TABLE OF CONTENTS

REVISION HISTORY

3/2017—Rev. F to Rev. G 10/2015—Rev. E to Rev. F 9/2012—Rev. D to Rev. E Changed Table 2 Conditions from V 2/2009—Rev. C to Rev. D 8/2008—Rev. B to Rev. C Changes to Programmable High Resolution Window 2/2004—Rev. A to Rev. B. 4/2002—Rev. 0 to Rev. A.

Figure 3. Simplified Schematic (One of Two Amplifiers Shown)

Rev. G | Page 4 of 16 SPECIFICATIONS

ELECTRICAL CHARACTERISTICS

VS = ±15 V , TA = 25°C, unless otherwise noted. Table 1. Parameter Symbol Conditions OP200A/OP200E OP200G Unit Min Typ Max Min Typ Max INPUT CHARACTERISTICS Input Offset Voltage VOS 25 75 80 200 μV Long-Term Input Voltage Stability 0.1 0.1 μV/mo Input Offset Current IOS VCM = 0 V 0.05 1.0 0.05 3.5 nA Input Bias Current IB VCM = 0 V 0.1 2.0 0.1 5.0 nA Input Noise Voltage en p-p 0.1 Hz to 10 Hz 0.5 0.5 μV p-p Input Noise Voltage Density1 en fO = 10 Hz 22 36 22 nV/√Hz fO = 1000 Hz 11 18 11 nV/√Hz Input Noise Current in p-p 0.1 Hz to 10 Hz 15 15 pA p-p Input Noise Current Density in fO = 10 Hz 0.4 0.4 pA/√Hz Input Resistance Differential Mode RIN 10 10 MΩ Input Resistance Common Mode RINCM 125 125 GΩ Large Signal Voltage Gain AVO VO = ±10 V RL = 10 kΩ 5000 12,000 3000 7000 M/mV RL = 2 kΩ 2000 3700 1500 3200 M/mV 1 Sample tested. VS = ±15 V , −55°C ≤ TA ≤ +125°C for OP200A, unless otherwise noted. Table 2. Parameter Symbol Conditions OP200A Unit Min Typ Max INPUT CHARACTERISTICS Input Offset Voltage VOS 45 125 μV Average Input Offset Voltage Drift TCVOS 0.2 0.5 μV/°C Input Offset Current IOS VCM = 0 V 0.15 2.5 nA Input Bias Current IB VCM = 0 V 0.9 5.0 nA Large Signal Voltage Gain AVO VO = 10 V RL = 10 kΩ 3000 9000 V/mV RL = 2 kΩ 1000 2700 V/mV Input Voltage Range1 IVR ±12 ±12.5 V Common-Mode Rejection Ratio CMRR VCM = ±12 V 115 130 dB Capacitive Load Stability AV = 1 8 nF POWER SUPPLY Power Supply Rejection Ratio PSRR VS = 3 V to 18 V 0.2 3.2 μV/V Supply Current Per Amplifier ISY No load 600 775 μA OUTPUT CHARACTERISTICS Output Voltage Swing VO RL = 10 kΩ ±12 ±12.4 V RL = 2 kΩ ±11 ±12 V 1 Guaranteed by CMRR test.

Rev. G | Page 5 of 16 VS = ±15 V , TA = 25°C, unless otherwise noted. Table 3. Parameter Symbol Conditions OP200A/OP200E OP200G Unit Min Typ Max Min Typ Max INPUT CHARACTERISTICS Input Voltage Range1 IVR ±12 ±13 ±12 ±13 V Common-Mode Rejection Ratio CMRR VCM = ±12 V 120 135 110 130 dB Channel Separation2 CS VO = 20 V p-p, fO = 10 Hz 123 145 123 145 dB Input Capacitance CIN 3.2 3.2 pF Capacitive Load Stability AV = 1, no oscillations 10 10 nF POWER SUPPLY Power Supply Rejection Ratio PSRR VS = ±3 V to ±18 V 0.4 1.8 0.6 5.6 μV/V Supply Current Per Amplifier ISY No load 570 725 570 725 μA OUTPUT CHARACTERISTICS Output Voltage Swing VO RL= 10 kΩ ±12 ±12.6 ±12 ±12.6 V RL = 2 kΩ ±11 ±12.2 ±11 ±12.2 V DYNAMIC PERFORMANCE Slew Rate SR 0.1 0.15 0.1 0.15 V/μs Gain Bandwidth Product GBP AV = 1 500 500 kHz 1 Guaranteed by CMRR test. 2 Guaranteed but not 100% tested. VS = ±15 V , −40°C ≤ TA ≤ +85°C, unless otherwise noted. Table 4. Parameter Symbol Conditions OP200E OP200G Unit Min Typ Max Min Typ Max INPUT CHARACTERISTICS Input Offset Voltage VOS 35 100 110 300 μV Average Input Offset Voltage Drift TCVOS 0.2 0.5 0.6 2.0 μV/°C Input Offset Current IOS VCM = 0 V 0.08 2.5 0.1 6.0 nA Input Bias Current IB VCM = 0 V 0 3 5.0 0.5 10.0 nA Large-Signal Voltage Gain AVO VO = ±10 V RL= 10 kΩ 3000 10,000 2000 5000 V/mV RL = 2 kΩ 1500 3200 1000 2500 V/mV Input Voltage Range1 IVR ±12 ±12.5 ±12 ±12.5 V Common-Mode Rejection Ratio CMRR VCM = ±12 V 115 130 105 130 dB Capacitive Load Stability AV = 1, no oscillations 10 10 nF POWER SUPPLY Power Supply Rejection Ratio PSRR VS = ±3 V to ±18 V 0.15 3.2 0.3 10.0 μV/V Supply Current Per Amplifier ISY No load 600 775 600 775 μA OUTPUT CHARACTERISTICS Output Voltage Swing VO RL = 10 kΩ ±12 ±12.4 ±12 ±12.4 V RL = 2 kΩ ±11 ±12 ±11 ±12.2 V 1 Guaranteed by CMRR test.

Rev. G | Page 7 of 16 ABSOLUTE MAXIMUM RATINGS Table 5. Parameter Rating Supply Voltage ±20 V Differential Input Voltage ±30 V Input Voltage Supply voltage Output Short-Circuit Duration Continuous Storage Temperature Range −65°C to +150°C Lead Temperature (Soldering, 60 sec) 300°C Junction Temperature Range (TJ) −65°C to +150°C Operating Temperature Range OP200A −55°C to +125°C OP200E, OP200G −40°C to +85°C Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. THERMAL RESISTANCE Table 6. Package Type θJA1 θJC Unit 8-Lead CERDIP (Z Suffix) 148 16 °C/W 8-Lead Plastic DIP (P Suffix) 96 37 °C/W 16-Lead SOIC (S Suffix) 92 27 °C/W 1 θJA is specified for worst-case mounting conditions, that is, θJA is specified for device in socket for CERDIP and PDIP packages; θJA is specified for device soldered to printed circuit board for SOIC package. ESD CAUTION

(DAC A and DAC B, respectively). Figure 35. Programmable High Resolution Window Comparator

REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 38. 16-Lead Standard Small Outline Package [SOIC_W] 1 The OP200GPZ, OP200GSZ, and OP200GSZ-REEL are RoHS Compliant Parts. registered trademarks are the property of their respective owners.