OP07DP

OP07C TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

OP07C, OP07D, OP07Y PRECISION OPERATIONAL AMPLIFIERS SLOS099B – OCTOBER 1983 – REVISED AUGUST 1996 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068Low Noise /C0068No External Components Required /C0068Replaces Chopper Amplifiers at a Lower Cost /C0068Single-Chip Monolithic Fabrication /C0068Wide Input Voltage Range 0 to ± 14 V Typ /C0068Wide Supply Voltage Range ± 3 V to ± 18 V /C0068Essentially Equivalent to Fairchild µA714 Operational Amplifiers /C0068Direct Replacement for PMI OP07C and OP07D

description

These devices represent a breakthrough in operational amplifier performance. Low offset and long-term stability are achieved by means of a low-noise, chopperless, bipolar-input-transistor amplifier circuit. For most applications, external components are not required for offset nulling and frequency compensation. The true differential input, with a wide input voltage range and outstanding common-mode rejection, provides maximum flexibility and performance in high-noise environments and in noninverting applications. Low bias currents and extremely high input impedances are maintained over the entire temperature range. The OP07 is unsurpassed for low-noise, high-accuracy amplification of very low-level signals. These devices are characterized for operation from 0°C to 70°C. AVAILABLE OPTIONS VIOmax PACKAGED DEVICES CHIP FORMTA VIOmax AT 25°C SMALL OUTLINE (D) PLASTIC DIP (P) CHIP FORM (Y) 0°C to 70°C 150 µV OP07CD OP07DD OP07CP OP07DP OP07Y The D package is available taped and reeled. Add the suffix R to the device type (e.g., OP07CDR). The chip form is tested at TA = 25°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. OFFSET N1 IN– IN+ VCC– OFFSET N2 V CC+ OUT NC D OR P PACKAGE (TOP VIEW) NC–No internal connection symbol OUT OFFSET N2 IN – IN + OFFSET N1 1 Copyright  1996, Texas Instruments IncorporatedPRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

OP07C, OP07D, OP07Y PRECISION OPERATIONAL AMPLIFIERS SLOS099B – OCTOBER 1983 – REVISED AUGUST 1996

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

These chips, properly assembled, display characteristics similar to the OP07. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform. CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 × 4 MINIMUM TJmax = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP. OUT VCC– VCC+ OFFSET N2 IN – IN + OFFSET N1 (4) (6) (7) (8) (2) (3) (1) BONDING PAD ASSIGNMENTS (4) (6)(7)(8) (2) (3)(1)

OP07C, OP07D, OP07Y PRECISION OPERATIONAL AMPLIFIERS SLOS099B – OCTOBER 1983 – REVISED AUGUST 1996 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 schematic VCC + OUT VCC – OFFSET N1 OFFSET N2 IN + IN – COMPONENT COUNT Resistors Transistors Capacitors absolute maximum ratings over operating free-air temperature range (unless otherwise noted) NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC– . 2. Differential voltages are at IN+ with respect to IN–. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output may be shorted to ground or either power supply. 5. For operation above 64°C free-air temperature, derate the D package to 464 mW at 70°C at the rate of 5.8 mW/°C. recommended operating conditions MIN MAX UNIT Supply voltage, VCC ± ± 3 ± 18 V Common-mode input voltage, VIC VCC ± = ± 15 V –13 13 V Operating free-air temperature, TA 0 70 °C

OP07C, OP97D, OP07Y PRECISION OPERATIONAL AMPLIFIERS SLOS099B – OCTOBER 1983 – REVISED AUGUST 1996

4 POST OFFICE BOX 655303 DALLAS, TEXAS 75265•

electrical characteristics at specified free-air temperature, VCC ± = ± 15 V (unless otherwise noted) PARAMETER TEST CONDITIONS † TA OP07C OP07D UNITPARAMETER TEST CONDITIONS † TA MIN TYP MAX MIN TYP MAX UNIT VIO Input offset voltage VO =0 R S =5 0Ω 25°C 60 150 60 150 µVVIO Input offset voltage VO = 0, R S = 50 Ω 0°C to 70°C 85 250 85 250 µV α VIO Temperature coefficient of input offset voltageVO = 0, R S = 50 Ω 0°C to 70°C 0.5 1.8 0.7 2.5 µV/°C Long-term drift of input offset voltage See Note 6 0.4 0.5 µV/mo Offset adjustment range R S = 20 kΩ , See Figure 1 25°C ± 4 ± 4 mV IIO Input offset current 25°C 0.8 6 0.8 6 nAIIO Input offset current 0°C to 70°C 1.6 8 1.6 8 nA α IIO Temperature coefficient of input offset current 0°C to 70°C 12 50 12 50 pA/°C IIB Input bias current nAIIB Input bias current 0°C to 70°C ± 2.2 ± 9 ± 3 ± 14 nA α IIB Temperature coefficient of input bias current 0°C to 70°C 18 50 18 50 pA/°C VICR Common mode input voltge range 25°C ± 13 ± 14 ± 13 ± 14 VVICR Common -mode input voltge range 0°C to 70°C ± 13 ± 13.5 ± 13 ± 13.5 V R L ≥ 10 kΩ ± 12 ± 13 ± 12 ± 13 VOM Peak output voltage R L ≥ 2 kΩ 25°C ± 11.5 ± 12.8 ± 11.5 ± 12.8 VVOM Peak output voltage R L ≥ 1 kΩ ± 12 ± 12 V R L ≥ 2 kΩ 0°C to 70°C ± 11 ± 12.6 ± 11 ± 12.6 A L i l diff ti l lt lifi ti VCC ± = ± 3 V, R L ≥ 500 kΩ VO = ± 0.5 V, 25°C 100 400 400 V/ VAVD Large-signal differential voltage amplification VO = ± 10 V R L =2k Ω 25°C 120 400 120 400 V/mV VO = ± 10 V, R L = 2 kΩ 0°C to 70°C 100 400 100 400 B1 Unity-gain bandwidth 25°C 0.4 0.6 0.4 0.6 MHz ri Input resistance 25°C 8 33 7 31 M Ω CMRR Common mode rejection ratio VIC = ± 13 V R S =5 0Ω 25°C 100 120 94 110 dBCMRR Common -mode rejection ratio VIC =± 13 V, R S = 50 Ω 0°C to 70°C 97 120 94 106 dB kSVS Supply voltage sensitivity (ΔVIO/ΔVCC ) VCC ± =± 3 V to ± 18 V, 25°C 7 32 7 32 µV/VkSVS Supply voltage sensitivity (ΔVIO/ΔVCC ) CC ± , R S = 50 Ω 0°C to 70°C 10 51 10 51 µV/V VO = 0, No load 80 150 80 150 PD Power dissipation VCC ± = ± 3 V, No load VO = 0, 25°C 4 8 4 8 mW † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise noted. NOTE 6: Since long-term drift cannot be measured on the individual devices prior to shipment, this specification is not intended to be a warranty. It is an engineering estimate of the averaged trend line of drift versus time over extended periods after the first thirty days of operation.

OP07C, OP07D, OP07Y PRECISION OPERATIONAL AMPLIFIERS SLOS099B – OCTOBER 1983 – REVISED AUGUST 1996 5POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 operating characteristics, VCC ± = ± 15 V, TA = 25°C PARAMETER TEST OP07C OP07D UNITPARAMETER CONDITIONS † MIN TYP MAX MIN TYP MAX UNIT f = 10 Hz 10.5 10.5 √Vn Equivalent input noise voltage f = 100 Hz 10.2 10.3 nV/√Hz f = 1 kHz 9.8 9.8 VN(PP) Peak-to-peak equivalent input noise voltagef = 0.1 Hz to 10 Hz 0.38 0.38 µV f = 10 Hz 0.35 0.35 √In Equivalent input noise current f = 100 Hz 0.15 0.15 pA/√Hz f = 1 kHz 0.13 0.13 IN(PP) Peak-to-peak equivalent input noise currentf = 0.1 Hz to 10 Hz 15 15 pA SR Slew rate R L ≥ 2 kΩ 0.3 0.3 V/µs † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise noted. electrical characteristics, VCC ± = ± 15 V, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS † OP07Y UNITPARAMETER TEST CONDITIONS † MIN TYP MAX UNIT VIO Input offset voltage R S = 50 Ω 60 150 µV Long-term drift of input offset voltageSee Note 6 0.5 µV/mo Offset adjustment range R S = 20 kΩ , See Figure 1 ± 4 mV IIO Input offset current 0.8 6 nA IIB Input bias current ± 2 ± 12 nA VICR Common-mode input voltage range ± 13 ± 14 V R L ≤ 10 kΩ ± 12 ± 13 VOM Peak output voltage R L ≤ 2 kΩ ± 11.5 ± 12.8 V R L ≤ 1 kΩ ± 12 AVD Large signal differential voltage amplification VCC ± = ± 3 V, VO = ± 0.5 V, R L ≤ 500 kΩ 400 AVD Large-signal differential voltage amplification VO = ± 10 V, R L = 2 kΩ 120 400 B1 Unity-gain bandwidth 0.4 0.6 MHz ri Input resistance 7 31 M Ω CMRR Common-mode input resistance VIC = ± 13 V, R S = 50 Ω 94 110 dB kSVS Supply-voltage rejection ratio (ΔVCC /ΔVIO) VCC ± = ± 3 V to ± 18 V, R S = 50 Ω 7 32 µV/V PD Power dissipation VO = 0, No load 80 150 M ΩPD Pow er dissipation VCC ± = ± 3 V, VO = 0, No load 4 8 M Ω NOTE 6: Since long-term drift cannot be measured on the individual devices prior to shipment, this specification is not intended to be a warranty. It is an engineering estimate of the averaged trend line of drift versus time over extended periods after the first thirty days of operation.

OP07C, OP07D, OP07Y PRECISION OPERATIONAL AMPLIFIERS SLOS099B – OCTOBER 1983 – REVISED AUGUST 1996

6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

operating characteristics, VCC ± = ± 15 V, TA = 25°C PARAMETER TEST CONDITIONS † OP07Y UNITPARAMETER TEST CONDITIONS † MIN TYP MAX UNIT f = 10 Hz 10.5 √Vn Equivalent input noise voltage f = 1 kHz 10.3 nV/√Hz f = 0.1 Hz to 10 Hz 9.8 VN(PP) Peak-to-peak equivalent input noise voltage f = 0.1 Hz to 10 Hz 0.38 µV f = 10 Hz 0.35 √In Equivalent input noise current f = 100 Hz 0.15 pA/√Hz f = 1 kHz 0.13 IN(PP) Peak-to-peak equivalent input noise current f = 0.1 Hz to 10 Hz 15 pA SR Slew rate R L = 2 kΩ 0.3 V/µs † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise noted.

APPLICATION INFORMATION

VCC– VCC+ IN – IN + + OFFSET N1 7 6 20 kΩ OFFSET Figure 1. Input Offset Voltage Null Circuit

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright  1998, Texas Instruments Incorporated