OG02B1B OMNIVISION | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
High-Resolution, Cost-Effective Global Shutter Image Sensors for Machine Vision Applications OmniVision's OG02B1B (monochrome) and OG02B10 (color) are global shutter image sensors designed to cost-effectively enable a wide range of consumer and industrial machine vision applications such as AR/VR headsets and accessories, industrial automation, robotics, agricultural drones and 3D modeling. These sensors provide designers with best-in-class resolution and the option for full-color imaging, and both have a 15 degree chief ray angle (CRA) to support wide field- of-view lens designs. This combination of color imaging and CRA is excellent for applications such as agricultural drones that must capture high-resolution color images for crop and field monitoring. Available in a 1/2.9 inch optical format, the OG02B1B and OG02B10 capture 2 megapixel or 1600 x 1300 resolution images and video at 60 frames per second (fps) using advanced 3 x 3 micron OmniPixel®3-GS pixel technology. This global shutter technology eliminates motion artifacts and blurring, and dramatically improves low-light sensitivity. Additionally, both sensors' excellent near infrared (NIR) sensitivity at 850 nm and 940 nm helps reduce device power consumption to extend battery life. Find out more at www.ovt.com. OG02B1B 2MP product brief lead free available in a lead-free package
Augmented and Virtual Reality Drones 3D Imaging Machine Vision Industrial Bar Code Scanning Industrial Automation
Applications
3 µm x 3 µm pixel with OmniPixel®3-GS technology automatic black level calibration (ABLC) programmable controls for: - frame rate - mirror and flip - cropping - windowing support output formats: 8/10-bit RAW fast mode switching supports 2x2 monochrome binning two-lane MIPI serial output interface DVP parallel output interface supports horizontal and vertical 2:1 monochrome subsampling support for image sizes: - 1600 x 1300 - 1280 x 720 - 640 x 480 embedded 128 bytes of one-time programmable (OTP) memory two on-chip phase lock loops (PLLs) LED PWM temperature sensor built-in strobe control Product Features Functional Block Diagram ¬ OG02B1B-G04A-Z (b&w, chip probing, 200 µm backgrinding, reconstructed wafer with good die)
Ordering Information
active array size: 1600 x 1300 power supply: - analog: 2.8V (nominal) - core: 1.2V (nominal) - I/O: 1.8V (nominal) temperature range: - operating: -30°C to +85°C junction temperature output interface: 2-lane MIPI serial output and DVP parallel output output formats: 10-bit RAW lens size: 1/2.9" input clock frequency: 6 ~ 27 MHz lens chief ray angle: 15° linear maximum image transfer rate: - 1600 x 1300: 60 fps minimum exposure time: 1 row period maximum exposure time: frame length - 12 row periods, where frame length is set by registers {0x380E, 0x380F} pixel size: 3 µm x 3 µm Product Specifications Version 1.0, September, 2018 OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision, the OmniVision logo and OmniPixel are registered trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.
4275 Burton Drive
Santa Clara, CA 95054 USA Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com OG02B1B OG02B1B image sensor array image sensor processor output interfacecolumn sample/hold row select PLL PLLs control register bank SCCB slave interfacetiming generator and system control logic gain control STROBE FSIN GPIO[10:0] XSHUTDOWN XVCLK PWM ULPM TM SCL SID SDA TMCLK MCP/MCN MDP[1:0]/MDN[1:0] D[9:0] VSYNC HREF PCLKtemperature sensor image array AMP ISP 10-bit ADC FIFO DVP MIPI