NPYT NIC | Alldatasheet

Document overview

  • PDF pages: 6

Technical content

SPECIFICATIONS ARE SUBJECT TO CHANGE Interference Suppression Capacitor NPYT Series

FEATURES

  • Self-Healing Construction
  • Y2 Class Safety Capacitors
  • High VAC Rating: 250/275/300VAC
  • High Withstanding Voltage; 2000VAC or 4000VDC
  • Safety Agency Listed: UL, cUL, ENEC, CQC
  • IEC 60068-1 Climatic category 40/110/56 MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD Operating Temperature -40°C ~ +110°C Rated Voltage 250/275/300VAC Capacitance Range 0.001μF ~ 0.1μF Capacitance Tolerance ±5% (J), ±10% (K), ±20% (M) Insulation Resistance (min.) > 15,000Megohm @ 100V after 60 sec. Dissipation Factor < 0.1% max. @ 1KHz/20°C IEC 60068-1 Climatic category (Damp heat, steady state) 40/110/56 Temp. +40°C ± 2°C with relative humidity (RH): 93% ±2% for 56 days Dielectric Strength Between Terminals 2,000VAC for 2 sec. or 4,000VDC for 2 sec. Between Terminals & Enclosure 2,100 VAC for 5 sec. max. HIGH VOLTAGE Y2 250/275/300VAC Safety Capacitors SPECIFICATIONS (CLASS Y2) L H T LS 15mm min. LD Agency Standard Capacitance Values Voltages Certificate Number UL/cUL UL60384-14 CSAE60384-14 0.001μF ~ 0.1μF 250/275/300VAC E209251 ENEC EN60384-14 : 2005 (ed.3) 250/275/300VAC SE/12059-1A CQC IEC60384-14 : 2005 250/275/300VAC CQC13001099626 SAFETY AGENCY APPROVALS L H T LS 15mm min. LD MARKING C US NPYT/NIC Y2 104K xxxV~ 40 / 110 / 56 / B 14 A Lead-Space (mm) 7.5 10 15 22.5 27.5 DV/DT (V/μS) 100 100 100 100 100 DV/DT RATINGS Lead-space = 7.5mm Lead-space > 10mm C US NPYT/NIC Y2 152K xxxV~ 14 A See date code marking guide on page 5.

104 K 300V

Capacitance code in PFD, first two digits are significant, third digit is no. of zeros. E.G. 103 = 0.01μF, 104 = 0.1μF Tolerance Code J = ±5%, K = ±10%, M = ± 20% Voltage Rating (VAC) PART NUMBER SYSTEM NPYT Series N1, N2 Alternate Size Codes (see values table) F RoHS Compliant Safety Classification TB Optional T&B packaging (see standard values tables) Voltage Rating Voltage Rating Expanded Voltage Range

SPECIFICATIONS ARE SUBJECT TO CHANGE Interference Suppression Capacitor NPYT Series Part Number Cap. Value (μF) Capacitance Code Standard Tolerance* L ±1.0 H ±1.0 T ±1.0 LS ±1.0 LD ±0.05 Packaging Quantity Bulk T&B 250VAC STANDARD VALUES AND CASE SIZE (mm) *Also available in ±5% (J) and ±20% (M) tolerance.

SPECIFICATIONS ARE SUBJECT TO CHANGE Interference Suppression Capacitor NPYT Series Part Number Cap. Value (μF) Capacitance Code Standard Tolerance* L ±1.0 H ±1.0 T ±1.0 LS ±1.0 LD ±0.05 Packaging Quantity Bulk T&B 275VAC STANDARD VALUES AND CASE SIZE (mm) *Also available in ±5% (J) and ±20% (M) tolerance.

SPECIFICATIONS ARE SUBJECT TO CHANGE Interference Suppression Capacitor NPYT Series Part Number Cap. Value (μF) Capacitance Code Standard Tolerance* L ±1.0 H ±1.0 T ±1.0 LS ±1.0 LD ±0.05 Packaging Quantity Bulk T&B STANDARD VALUES AND CASE SIZE (mm) *Also available in ±5% (J) and ±20% (M) tolerance.

SPECIFICATIONS ARE SUBJECT TO CHANGE Interference Suppression Capacitor NPYT Series Item Test Method Standard Endurance +110°C±2°C, 170% of RV for 1,000 hours (Voltage applied through 47W ± 5% resistor, every hour voltage is increased to 1,000Vrms for 0.1 seconds). Physical: No remarkable physical Capacitance: Within ±10% of initial measured value DF: 0.8% max. IR > 50% of specified value Moisture Resistance +40°C±2°C, Rated Voltage, 87% ~ 93% RH, 500 hours. (Part stablized at room temperature for 1.5 ± 0.5 hours before taking measurements) Physical: No remarkable physical Capacitance: Within ±5% of initial measured value DF: < 0.2%, IR > 50% of specified value Temperature Cycling A total of 5 cycles. Each cycle includes: 1. +20 ± 2°C for 3 minutes 2. -40 ± 3°C for 30 minutes 3. +20 ± 2°C for 3 minutes 4. +110 ± 3°C for 30 minutes 5. +20 ± 2°C for 3 minutes After test allow parts to stablized at room temperature for 1.5 ± 0.5 hours before taking measurements. Physical: No remarkable physical Capacitance: Within ±5% of initial measured value DF: < 0.2%, IR > 50% of specified value Resistance to Dry Heat +110 ± 2°C for 16 +1/-0 hours Physical: No remarkable physical Capacitance: Within ±5% of initial measured value DF: < 0.2%, IR > 50% of specified value Resistance to Cold -40°C ± 3°C for 2 hours ± 1 hours Physical: No remarkable physical Capacitance: Within ±5% of initial measured value DF: < 0.2%, IR > 50% of specified value Resistance to Soldering Heat Preheat: +100°C ~ +120°C (60 seconds max). Ramp-up rate: 3°C per second max. Peak soldering temperature: +260 ± 5°C for 5 seconds max. Immersion depth: 4.8mm max from base of component (Part stablized at room temperature for 1.5 ± 0.5 hours before taking measurements) Physical: No remarkable physical Capacitance: Within ±5% of initial measured value DF: < 0.2%, IR > 50% of specified value Vibration Frequency: 10-55-10Hz Magnitude: 1.5mm in X, Y and Z directions Duration: 2 +1/-0 hours in each direction No short/open circuit and stable connection Terminal Strength Apply 1.0Kg of force for 10 ± 1 seconds to the terminal in the axial direction away from the body of the part. No abnormalities Bending Strength Apply 0.5Kg of force for 2 cycles. Each cycle includes 90° once, return to original position for 2 ~ 3 seconds and then bend in the opposite direction. No abnormalities ENVIRONMENTAL CHARACTERISTICS Year Month Code Year Month Code Year Month Code Year Month Code 2016 Jan. n 2017 Jan. A 2018 Jan. N 2019 Jan. a Feb. p Feb. B Feb. P Feb. b Mar q Mar C Mar Q Mar c Apr. r Apr. D Apr. R Apr. d May s May E May S May e Jun. t Jun. F Jun. T Jun. f Jul. u Jul. G Jul. U Jul. g Aug. v Aug. H Aug. V Aug. h Sept. w Sept. J Sept. W Sept. j Oct. x Oct. K Oct. X Oct. k Nov. y Nov. L Nov. Y Nov. l Dec. z Dec. M Dec. Z Dec. m DATE CODE MARKING

SPECIFICATIONS ARE SUBJECT TO CHANGE Interference Suppression Capacitor NPYT Series B C A AMMO PACK BOX DIMENSIONS Item Dimension (mm) H 18.5 ± 1.0 LS 10.0 ± 1.0 15.0 ± 1.0 P 25.4 ± 1.5 P1 12.7 ± 0.3 W 18.0 ± 1.0 fD1 4.0 ± 0.3 Item Dimension (mm) A 270 B 50 C 330 Item Dimension (mm) H 18.5 ± 1.0 Ld 0.60 ± 0.1 LS 7.5 ± 1.0 P 12.7 ± 1.5 P1 12.7 ± 0.3 W 18.0 ± 1.0 fD1 4.0 ± 0.3 AMMO PACK (TB) TAPING DIMENSIONS 10 & 15mm LEAD SPACE fD H W P AMMO PACK (TB) TAPING DIMENSIONS 7.5mm LEAD SPACE LS Ld fD H W P LS Ld