NPT40-M

NPT40-M ADVANCEDENERGY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

©2022 Advanced Energy Industries, Inc. ARTESYN NPT40-M SERIES 55 W Total Power 45 to 55 W Input Voltage 90 to 264 VAC 120 to 300 VDC # of Outputs Triple AT A GLANCE SPECIAL FEATURES  Medical and ITE safety approvals  Universal input  Less than 1U high  2" x 4" footprint  Overload and short circuit protection  High MTBF  Built in EMI filter (CISPR 22 Class B)  0 °C to +80 °C operation  Input power < 74 W  Complies with EN61000-3-2  Class I approved  Class II approved (with Class A EMI)  LPX100 enclosure kit available  Dual AC fuses  RoHS compliant SAFETY  TUV 62368-1, 60601-1  UL 60601-1  CSA 62368-1, 60601-1  CB Certificate and report  CE Mark (LVD)  CQC Mark  UKCA Mark Advanced Energy's Artesyn NPT40-M series of open-frame AC-DC power supplies comprises three triple output models, covering a variety of standard voltages from 3.3 to 24 V. Each model accepts a universal input of 90 to 264 VAC or 127 to 300 VDC. All models feature ITE and medical safety approvals. The series is primarily intended for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.

2 advancedenergy.com NPT40-M ELECTRICAL SPECIFICATIONS Input Input ra nge 90 to 264 VAC or 127 to 300 VDC Frequency 47 to 440 Hz Inrush current < 50 A peak @ 230 VAC, cold start @ 25°C Input power < 74 W Efficiency 75% average EMI/RFI FCC Class B conducted, CISPR 22 Class B conducted, EN55022 Class B conducted, VDE0878PT3 Class B conducted Safety ground leakage current 275 µA @ 50/60 Hz, 264 VAC input Output Maximum power 45 W for convection, 55 W with 30 CFM forced air Hold-up time 10/20 ms, 115/230 VAC input line Overload protection Short circuit protection on all outputs. Case overload protected @ 110% to 160% above peak rating Overvoltage protection 6.5 to 7.5 V on the main output ENVIRONMENTAL SPECIFICATIONS Operating temperature 0 °C to 50 °C ambient derate each output at 2.5% per degree from 50 °C to 80 °C. -20 °C start up Storage temperature -45 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating, non-condensing 10% to 90% RH Vibration IEC68-2-6 to the levels of IEC721-3-2 MTBF demonstrated > 550,000 hours at full load and 25 °C ambient conditions

advancedenergy.com 3 NPT40-M MECHANICAL DRAWING 1.10" (28) BARCODE SERIAL LABEL MODEL: NPT42-M MADE IN PHILIPPINES RoHS GND TAB (CN1) PIN 1 SK1 PIN 3 MODEL LABEL SK2 RoHS LABEL 4.00" (101.6) 3.73" (94.6) 2.00" (50.8) 1.72" (43.8)

4.0 MOUNTING HOLE

4 PLACES

1.10" (28) 0.96" (24.4) .063" (1.6) 0.197” (5.0) MINIMUM STANDOFF HEIGHT

4 advancedenergy.com NPT40-M PIN ASSIGNMENTS Connector NPT42-M NPT43-M NPT44-M SK1-1 Line Line Line SK1-3 Neutral Neutral Neutral CN1 Ground Ground Ground SK2-1 +5 V +5 V +5 V SK2-2 +5 V +5 V +5 V SK2-3 Common Common Common SK2-4 Common Common Common SK2-5 -12 V -15 V +12 V SK2-6 +12 V +15 V +24 V MATING CONNECTORS AC Input Molex 09-50-8031 PINS: 08-52-0113 DC Outputs Molex 09-50-8061 PINS: 08-52-0113 Artesyn Embedded Power Connector Kit #70-841-006, includes all of the above. 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02” (± 0.5 mm). 3. Mounting holes M1 and M2 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Ground faston tab size is 6.35 mm x 0.80 mm. 6. Specifications are for convection rating at factory settings at 115 VAC input, 25 °C unless otherwise stated. 7. Warranty: 2 years. 8. Weight: 0.3 lbs/0.14 kg.

ORDERING INFORMATION

Model Number Output Voltage Minimum Load Maximum Load with Convection Cooling Maximum Load with 30CFM Forced Air Peak Load Regulation

2 Ripple

P/P (PARD) NPT42-M +5 V 0.5 A 5 A 8 A 9 A ± 2% 50 mV +12 V 0.1 A 2.5 A 3 A 4 A ± 5% 120 mV -12 V 0 A 0.5 A 0.7 A 0.7 A ± 5% 120 mV NPT43-M +5 V 0.5 A 5 A 8 A 9 A ± 2% 50 mV +15 V 0.1 A 2 A 2.4 A 4 A ± 5% 150 mV -15 V 0 A 0.5 A 0.7 A 0.7 A ± 5% 150 mV NPT44-M +5 V 0.5 A 5 A 8 A 9 A ± 2% 50 mV +24 V 0.1 A 1.0 A 1.5 A 2 A ± 5% 240 mV +12 V 0 A 0.5 A 0.7 A 0.7 A ± 5% 120 mV 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2 . At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3 . Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users.

ENG-NPT40-M-235-02 4.20 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2022 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.