NPSE-T150M100V10X12.8LBF

NIC-NSPE-T-ELKO NIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

NSPE-T SeriesHybrid Aluminum Electrolytic Capacitors Rated Voltage Range 25 ~ 125Vdc Rated Capacitance Range 6.8 ~ 330μF Operating Temp. Range -55 ~ +125°C Capacitance Tolerance ±20% (M) Max. Leakage Current After 2 Minutes @ 20°C Less than 0.05CV or 100μA whichever is greater Working and Surge Voltage Ratings W.V. (Vdc) 25 35 40 50 63 80 100 125 S.V. (Vdc) 32 44 50 63 79 100 125 157 Tan δ @ 120Hz/20°C 0.16 Impedance Ratio Z -55°C/Z +20°C 1 ~ 2.5 Load Life Test @ 125°C and Rated Voltage W.V. (Vdc) 25 35 40 50 63 80 100 125 φ8 & 10mm 3000 hrs. Capacitance Change Within ±30% of initial measured value Tan δ and ESR Less than 200% of specifi ed max. value Leakage Current Less than speci fi ed max. value ESR Less than 200% of speci fi ed max. value Resistance to Soldering Heat Hot Plate at +250°C for 30 seconds with electrodes facing downward Capacitance Change Within ±10% of the initial measured value Dissipation Factor Less than the initial limit Leakage Current Less then the initial limit CHARACTERISTICS

• CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING
• EXTENDED LOAD LIFE AT HIGH TEMPERATURE (1,500 ~ 3,000 HOURS @ +125°C)
• HIGH VOLTAGE RATINGS (25 ~ 125VDC)
• LOW ESR AND HIGH RIPPLE CURRENT RATINGS 6.3x6.3mm ~ 10x10.8mm CASE SIZES
• REFLOW SOLDERING RATED TO +260°C (+250°C 80V & 125V) Expanded Values & 125V PART NUMBER Cap. (μF) Working Voltage Case Size (D X L) mm Max. Tan δ 120Hz/20°C Max. ESR (mΩ) AT 100kHz/20°C Max. Ripple Current (mA rms) AT 100KHz/125°C Load Life Hours (+125°C) NSPE-T470M25V6.3X6.3NBF 47 6.3X6.3 0.16 60 890 1500 NSPE-T680M25V6.3X8NBF 68 6.3X8 0.16 45 980 2000 NSPE-T151M25V8X10.8NBF 150 8X10.8 0.16 27 1330 3000 NSPE-T271M25V10X10.8NBF 270 10X10.8 0.16 22 1520 3000 NSPE-T331M25V10X12.8NBF 330 10X12.8 0.16 16 1740 3000 NSPE-T270M35V6.3X6.3NBF 27 6.3X6.3 0.16 100 760 1500 NSPE-T470M35V6.3X8NBF 47 6.3X8 0.16 60 910 2000 NSPE-T101M35V8X10.8NBF 100 8X10.8 0.16 30 1260 3000 NSPE-T151M35V10X10.8NBF 150 10X10.8 0.16 23 1480 3000 NSPE-T221M35V10X12.8NBF 220 10X12.8 0.16 17 1700 3000 NSPE-T180M40V6.3X6.3NBF 18 6.3X6.3 0.16 110 720 1500 NSPE-T270M40V6.3X8NBF 27 6.3X8 0.16 70 870 2000 NSPE-T560M40V8X10.8NBF 56 8X10.8 0.16 32 1220 3000 NSPE-T101M40V10X10.8NBF 100 10X10.8 0.16 24 1440 3000 NSPE-T121M40V10X12.8NBF 120 10X12.8 0.16 18 1650 3000 NSPE-T100M50V6.3X6.3NBF 10 6.3X6.3 0.16 120 690 1500 NSPE-T150M50V6.3X8NBF 15 6.3X8 0.16 80 840 2000 NSPE-T330M50V8X10.8NBF 33 8X10.8 0.16 35 1170 3000 NSPE-T560M50V10X10.8NBF 56 10X10.8 0.16 25 1390 3000 NSPE-T820M50V10X12.8NBF 82 10X12.8 0.16 19 1590 3000 STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) New ValuesFor Automotive Applications See Part Numbering System

PART NUMBER Cap. (μF) Working Voltage Case Size (D X L) mm Max. Tan δ 120Hz/20°C Max. ESR (mΩ) AT 100kHz/20°C Max. Ripple Current (mA rms) AT 100KHz/125°C Load Life Hours (+125°C) NSPE-T6R8M63V6.3X6.3NBF 6.8 6.3X6.3 0.16 150 670 1500 NSPE-T100M63V6.3X8NBF 10 6.3X8 0.16 100 740 2000 NSPE-T220M63V8X10.8NBF 22 8X10.8 0.16 40 1090 3000 NSPE-T330M63V8X10.8NBF 33 8X10.8 0.16 40 1090 3000 NSPE-T330M63V10X10.8NBF 33 10X10.8 0.16 30 1260 3000 NSPE-T470M63V10X10.8NBF 47 10X10.8 0.16 30 1260 3000 NSPE-T560M63V10X12.8NBF 56 10X12.8 0.16 22 1440 3000 NSPE-T120M80V10X10.8LBF 12 10X10.8 0.16 70 900 3000 NSPE-T150M80V10X10.8LBF 15 10X10.8 0.16 70 900 3000 NSPE-T180M80V10X12.8LBF 18 10X12.8 0.16 50 1100 3000 NSPE-T100M100V10X10.8LBF 10 100 10X10.8 0.16 80 870 3000 NSPE-T120M100V10X10.8LBF 12 10X10.8 0.16 80 870 3000 NPSE-T150M100V10X12.8LBF 15 10X12.8 0.16 60 1000 3000 NSPE-T100M125V10X10.8LBF 10 125 10X10.8 0.16 90 750 3000 STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) New ValuesFor Automotive Applications See Part Numbering System NSPE-T SeriesHybrid Aluminum Electrolytic Capacitors Part Marking Capacitance Value Voltage Lot Code Series Code 6R8 63V T__ DIMENSIONS (mm) 0.3mm max. Dφ L + -I I W P A B NSPE-T 220 M 63V 8x10.8 N B Y F RoHS Compliant B=Sn-Bi Finish & 13" Reel, L=Sn-Bi Finish & 15" Reel Refl ow Temp. Code (N=+260°C, L=+250°C) Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, fi rst 2 digits are signifi cant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Series PART NUMBER SYSTEM Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certifi ed production site RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency 100Hz 1KHz 10KHz 100KHz 47 ~ 330μF 0.10 0.35 0.70 1.0

NSPE-T SeriesHybrid Aluminum Electrolytic Capacitors LAND PATTERN DIM. (mm) + - AA P B Case Dia. A B P 6.3 3.6 1.8 1.8 8 4.1 2.1 2.8 10 4.4 2.5 4.3 Rated Voltage/Diameter Time Above +200°C Time Above +217°C Time Above +230°C Peak Temperature 80 ~ 125V / 10mm +250°C (5 sec. max.) PEAK TEMPERATURE AND DURATION RECOMMENDED REFLOW SOLDERING PROFILE* Time Above 200°C (80 seconds max.) 100 150 200 Time (Seconds) Temperature - Deg. C Preheat - 120 seconds max. (+150°C ~ +190°C) Peak Temperature (260°C/5 seconds)260

230 Time Above 230°C

(40 seconds max.) *Two refl ow passes are permissible with a cool down to room temperature required between the fi rst and second pass. TA P Feeding 1.5∅ +0.1/- 1.75 ± D BC 1.5φ+0.1/-0 1.75 + 0.15 t4 + 0.1 Case Size A ±0.5 B ±0.5 C ±0.3 D ±0.1 P ±0.1 T ±0.2 t max. Case Size W ±1.0 Qty per Reel 6.3x6.3 18 800 1000 6.3x8 18 500 900 8x10.5 26 300 500 10x10.5 26 300 500 10x12.8 26 300 400 REEL DIMENSIONS (mm) TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. 2mm ± 0.5mm φ13mm ± 0.5mm φ21mm ± 0.8mm φ330mm ± 2.0mm or φ380mm ± 2.0mm φ50mm min. W 3mm