NPC_14 NIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
SPECIFICATIONS ARE SUBJECT TO CHANGE Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series CHARACTERISTICS STANDARD PRODUCTS AND SPECIFICATIONS
- LOW IMPEDANCE & ESR AT HIGH FREQUENCY
- HIGH RIPPLE CURRENT
- REPLACES MULTIPLE TANTALUM CHIPS IN POWER SUPPLIES
- FITS EIA (7343) “D” LAND PATTERNS
- Pb-FREE (GOLD TERMINATION PLATING)
- COMPATIBLE WITH +260°C* REFLOW SOLDERING Rated Working Range 2.0 ~ 10VDC Rated Capacitance Range 22 ~ 470μF Operating Temperature Range -55 ~ +105°C Capacitance Tolerance ± 20% (M) Max. Leakage Current (μA) After 5 Minutes (+20°C) <0.04CV Surge Voltage (1000 cycles, 30 sec. on, 5 min. 30 sec. off, 1KΩ) Max. Tan δ, 120Hz, +20°C D1, D6 <0.05 D5, D7, D8 <0.1 High Temperature Load Life 2,000 Hours @ 105°C at Rated Working Voltage after 2x recommended refl ow profi le Capacitance Change Within ±20% of initial measured value Tan δ D7, D8 Less than 150% of speci fi ed max. value D1, D5, D6 Less than 200% of speci fi ed max. value Leakage Current Less than speci fi ed max. value Moisture Resistance
500 Hours @ +60°C at 90 ~ 95% RH
after 2x recommended refl ow profi le (JEDEC MSL-3) Capacitance Change Within -20%/+40% of initial measured value D5, *Within -20%/+60% of initial measured value Tan δ D7, D8 Less than 150% of speci fi ed max. value D1, D5, D6 Less than 200% of speci fi ed max. value Leakage Current Less than 300% of speci fi ed max. value NIC Part Number (+260°C Refl ow) WV Cap. Max. LC Tan δ Max. Ripple Current (mArms) 100KHz @ +105°C Max. ESR +20°C & 100KHz (Ω) Height H ± 0.1(Vdc) (μF) ( μA) NPC101M2D5ZATRF 100 8.0 0.10 2,700 0.009 1.1 NPC101M2D1UATRF 100 8.0 0.05 3,000 0.005 1.4 NPC101M2D1ZATRF 100 8.0 0.05 3,000 0.009 1.4 NPC101M2D6XATRF 100 8.0 0.05 3,000 0.013 1.9 NPC101M2D6ZATRF 100 8.0 0.05 3,000 0.009 1.9 NPC121M2D6ZATRF 120 9.6 0.05 3,000 0.009 1.9 NPC151M2D5ZATRF 150 12.0 0.10 2,700 0.009 1.1 NPC151M2D1UATRF 150 12.0 0.05 3,000 0.005 1.4 NPC151M2D6ZATRF 150 12.0 0.05 3,000 0.009 1.9 NPC181M2D5ZATRF 180 14.4 0.10 2,700 0.009 1.1 NPC181M2D6ZATRF 180 14.4 0.05 3,000 0.009 1.9 NPC221M2D5ZATRF 220 17.6 0.10 2,700 0.009 1.1 NPC221M2D6YATRF 220 17.6 0.05 3,000 0.007 1.9 NPC221M2D6ZATRF 220 17.6 0.05 3,000 0.009 1.9 NPC221M2D7XATRF 220 17.6 0.10 3,500 0.010 2.7 NPC271M2D6ZATRF 270 21.6 0.05 3,000 0.009 1.9 NPC271M2D6YATRF 270 21.6 0.05 3,500 0.006 1.9 NPC271M2D8YATRF 270 21.6 0.10 3,500 0.007 2.9 NPC331M2D6ZATRF* 330 26.4 0.10 3,000 0.009 1.9** NPC331M2D6YATRF* 330 26.4 0.10 3,500 0.006 1.9** NPC331M2D6UATRF* 330 26.5 0.10 3,500 0.0045 1.9** NPC331M2D8YATRF 330 26.4 0.10 3,500 0.007 2.9 NPC391M2D8YATRF 390 31.2 0.10 3,500 0.007 2.9 NPC471M2D8YATRF 470 37.6 0.10 3,500 0.007 2.9 NPC820M2.5D1ZATRF 2.5 82 8.2 0.05 3,000 0.009 1.4
FEATURES
*See Part Number System for Details PNb S f Di l RoHS Compliant includes all homogeneous materials *See note regarding DF in characteristics table (Moisture Resistance). **height dimension tolerance ±0.2mm *Applies to values with asterisk in column "NIC Part Number"
SPECIFICATIONS ARE SUBJECT TO CHANGE NIC Part Number (+260°C Refl ow) WV Cap. Max. LC Tan δ Max. Ripple Current (mArms) 100KHz @ +105°C Max. ESR +20°C & 100KHz (Ω) Height H ± 0.1(Vdc) (μF) ( μA) NPC101M2.5D6ZATRF 2.5 100 10.0 0.05 3,000 0.009 1.9 NPC680M4D5XATRF 4.0 68 10.9 0.10 2,100 0.015 1.1 NPC680M4D1ZATRF 68 10.9 0.05 3,000 0.009 1.4 NPC680M4D6XATRF 68 10.9 0.05 3,000 0.013 1.9 NPC680M4D6ZATRF 68 10.9 0.05 3,000 0.009 1.9 NPC820M4D6XATRF 82 13.1 0.05 3,000 0.010 1.9 NPC101M4D6XATRF 100 16.0 0.05 3,000 0.010 1.9 NPC121M4D6XATRF 120 19.2 0.05 3,000 0.010 1.9 NPC151M4D6XATRF 150 24.0 0.05 3,000 0.010 1.9 NPC151M4D7XATRF 150 24.0 0.10 3,500 0.010 2.7 NPC181M4D6ZATRF 180 28.8 0.05 3,000 0.009 1.9 NPC181M4D8ZATRF 180 28.8 0.10 3,500 0.009 2.9 NPC221M4D6ZATRF 220 35.2 0.05 3,000 0.009 1.9 NPC221M4D8ZATRF 220 35.2 0.10 3,500 0.009 2.9 NPC271M4D8ZATRF 270 43.2 0.10 3,500 0.009 2.9 NPC330M6.3D6XATRF 6.3 33 8.3 0.05 3,000 0.013 1.9 NPC150M8D6XATRF 15 4.8 0.05 3,000 0.015 1.9 NPC220M8D6ATRF 22 7.0 0.05 2,500 0.018 1.9 NPC330M8D6ATRF 33 10.6 0.05 2,500 0.018 1.9 NPC330M8D7XATRF 33 10.6 0.10 3,000 0.013 2.7 NPC470M8D6ATRF 47 11.8 0.05 2,500 0.018 1.9 NPC680M8D7ATRF 68 21.8 0.10 2,500 0.018 2.7 NPC101M8D7ATRF 100 32.0 0.10 2,500 0.018 2.7 NPC220M10D6ATRF 10 22 8.8 0.10 1,600 0.030 1.9 NPC470M10D6ATRF 47 18.8 0.10 1,800 0.025 1.9 Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series STANDARD PRODUCTS AND SPECIFICATIONS Frequency 1KHz<=f<10KHz 10KHz<=f<100KHz 100KHz<=f<1MHz Correction Factor 0.6 0.85 1.0 RIPPLE CURRENT FREQUENCY CORRECTION FACTORS *See note regarding DF in characteristics table (Moisture Resistance). **height dimension tolerance ±0.2mm
SPECIFICATIONS ARE SUBJECT TO CHANGE RECOMMENDED LAND PATTERNS (mm) Case Code abc D1, D5, D6, D7, D8 2.4 2.9 3.7 A B C A Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series NOTES ON REFLOW SOLDERING: 1. SAC alloy (+217°C) refl ow soldering compatible 2. Soldering heat limits apply to the top surface of component 3. If you have concerns about your refl ow soldering profi le review them with NIC to insure compatible [tpmg@niccomp.com] APPLICATION NOTES: 1. NPC Series cannot be used in coupling, time-constant or other circuits that are greatly affected by leakage current. 2. NPC parts are polarized so be sure to verify component orientation when mounting components. 3. Do not apply over voltage exceeding the rated voltage. 4. Do not apply ripple current over the specifi ed maximum ripple current rating. TIME (SECONDS) COMPONENT SURFACE TEMP. (oC) RECOMMENDED REFLOW SOLDERING PROFILE Pre-Heat 160oC ~ 180°C NATURAL COOLING Peak Temperature 260°C Max. for 10 sec. 120 Sec. Max. 250 230 160 100 200 Time Above 230°C 40 sec. max. 30 sec. max. 260 TERMINATION MATERIAL: Au: 0.003 ~ 0.014μm Pd: 0.02 ~ 0.07μm Ni: 0.5 ~ 2.0μm Ni: 0.5 ~ 2.0μm Pd: 0.02 ~ 0.07μm Au: 0.003 ~ 0.014μm Cu: 100 ±8μm DIMENSIONS (mm) VOLTAGE CODES Voltage Code 2.0VDC d 2.5VDC e 4.0VDC g 6.3VDC j 8.0VDC k 10VDC A 7.3 4.3 1.4 2.4 1.2 D5 1.1 D6 1.9* D7 2.7 D8 2.9 W1+ 220 d58 Anode Polarity Indicator Voltage Code Capacitance Value Lot Number W H L S PART NUMBERING SYSTEM NPC 101 M 6.3 D7 X A TR 500 F RoHS Compliant Optional 500 piece reel qty Tape & Reel Packaging Denotes +260°C Peak Refl ow Performance Code (see Standard Products & Specifi cations Tables) Case Size Working Voltage (Vdc) Tolerance Code M=20%, K=10% Capacitance Code in μF, fi rst 2 digits are signifi cant, third digits no. of zeros Series *D6 - See Standard Products & Specifi cations Tables for height tolerance.
SPECIFICATIONS ARE SUBJECT TO CHANGE TAPE DIMENSIONS (mm) REEL TAPE DIMENSIONS (mm) C A W B t Case 1.6 0.3 D5 1.5 D6 2.2 D7 2.9 D8 3.1 Case Quantity D1, D5, D6 330 80 13 13.5 2.0 3,500 500*D7, D8 2,000 D J F t K C A H E B G *See part number system for details on designating reel quantity Surface Mount Solid Polymer Aluminum Electrolytic Capacitors NPC Series PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capactitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specifi c application - process details with NIC’s technical support personnel: tpmg@niccomp.com 220 d58 220 d58 220 d58 Anode