NP52N06SLG_15 RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.
- All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. MOS FIELD EFFECT TRANSISTOR NP52N06SLG SWITCHING N-CHANNEL POWER MOS FET DATA SHEET Document No. D18202EJ2V0DS00 (2nd edition) Date Published July 2006 NS CP(K) Printed in Japan 2006 The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
DESCRIPTION
The NP52N06SLG is N-channel MOS FET designed for high current switching applications.
ORDERING INFORMATION
PART NUMBER LEAD PLATING PACKING PACKAGE NP52N06SLG-E1-AY NP52N06SLG-E2-AY Pure Sn (Tin) Tape 2500 p/reel TO-252 (MP-3ZK) typ. 0.27 g
FEATURES
- Channel temperature 175 degree rating
- Low on-state resistance R DS(on) = 17.5 mΩ MAX. (VGS = 10 V, ID = 26 A)
- Logic level drive type ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Drain to Source Voltage (VGS = 0 V) V DSS 60 V Gate to Source Voltage (VDS = 0 V) V GSS ±20 V Drain Current (DC) (TC = 25°C) I D(DC) ±52 A Drain Current (pulse) Note1 ID(pulse) ±104 A Total Power Dissipation (TC = 25°C) P T1 56 W Total Power Dissipation (TA = 25°C) P T2 1.2 W Channel Temperature T ch 175 °C Storage Temperature T stg −55 to +175 °C Repetitive Avalanche Current Note2 IAR 20 A Repetitive Avalanche Energy Note2 EAR 40 mJ Notes 1. PW ≤ 10 μs, Duty Cycle ≤ 1% 2. Tch ≤ 150°C, VDD = 30 V, RG = 25 Ω, VGS = 20 → 0 V THERMAL RESISTANCE Channel to Case Thermal Resistance R th(ch-C) 2.68 °C/W Channel to Ambient Thermal Resistance R th(ch-A) 125 °C/W (TO-252)
Data Sheet D18202EJ2V0DS 2 NP52N06SLG ELECTRICAL CHARACTERISTICS (TA = 25°C) CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Zero Gate Voltage Drain Current I DSS V DS = 60 V, VGS = 0 V 10 μA Gate Leakage Current I GSS V GS = ±20 V, VDS = 0 V ±10 μA Gate Cut-off Voltage V GS(off) V DS = 10 V, ID = 1 mA 1.5 2.0 2.5 V Forward Transfer Admittance Note | yfs | V DS = 10 V, ID = 26 A 8 14.5 S Drain to Source On-state Resistance Note RDS(on)1 VGS = 10 V, ID = 26 A 13.6 17.5 m Ω R DS(on)2 VGS = 4.5 V, ID = 26 A 17.5 25 m Ω Input Capacitance C iss V DS = 10 V 2100 pF Output Capacitance C oss V GS = 0 V 250 pF Reverse Transfer Capacitance C rss f = 1 MHz 150 pF Turn-on Delay Time t d(on) V DD = 30 V 12 ns Rise Time t r I D = 26 A 10 ns Turn-off Delay Time t d(off) V GS = 10 V 47 ns Fall Time t f R G = 0 Ω 9 ns Total Gate Charge Q G V DD = 48 V 39 nC Gate to Source Charge Q GS V GS = 10 V 7.5 nC Gate to Drain Charge Q GD I D = 52 A 12 nC Body Diode Forward Voltage Note VF(S-D) I F = 52 A, VGS = 0 V 1.0 1.5 V Reverse Recovery Time t rr I F = 52 A, VGS = 0 V 36 ns Reverse Recovery Charge Q rr di/dt = 100 A/ μs 39 nC Note Pulsed TEST CIRCUIT 3 GATE CHARGE VGS = 20 → 0 V PG. RG = 25 Ω 50 Ω D.U.T. L VDD TEST CIRCUIT 1 AVALANCHE CAPABILITY PG. D.U.T. RL VDD TEST CIRCUIT 2 SWITCHING TIME RG PG. IG = 2 mA 50 Ω D.U.T. RL VDD ID VDD IAS VDS BVDSS Starting Tch VGS τ = 1 s Duty Cycle ≤ 1% τ VGS Wave Form VDS Wave Form VGS VDS 10%0 90% 90% 90% VGS VDS ton toff td(on) tr td(off) tf 10% 10% μ
Data Sheet D18202EJ2V0DS 3 NP52N06SLG TYPICAL CHARACTERISTICS (TA = 25°C) DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA TOTAL POWER DISSIPATION vs. CASE TEMPERATURE dT - Percentage of Rated Power - % 100 120 0 25 50 75 100 125 150 175 TC - Case Temperature - °C P T - Total Power Dissipation - W 0 25 50 75 100 125 150 175 TC - Case Temperature - °C FORWARD BIAS SAFE OPERATING AREA I D - Drain Current - A 0.1 100 1000 0.1 1 10 100 ID(pulse) RDS(ON) Limited (at VGS = 10 V) DC Power Dissipation Limited ID(DC) 1 ms PW = 100 μs 10 ms TC = 25°C Single pulse VDS - Drain to Source Voltage - V TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH r th - Transient Thermal Resistance - °C/W 0.01 0.1 100 1000 Rth(ch-A) = 125°C/W Rth(ch-C) = 2.68°C/W Single pulse PW - Pulse Width - s 100μ 1 m 10 m 100 m 1 10 100 1000
Data Sheet D18202EJ2V0DS 4 NP52N06SLG DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE DRAIN CURRENT vs. GATE TO SOURCE VOLTAGE I D - Drain Current - A 100 150 012345 VGS = 10 V Pulsed VGS = 4.5 V VDS - Drain to Source Voltage - V I D - Drain Current - A 0.001 0.01 0.1 100 1000 012345 VDS = 10 V Pulsed Tch = −55°C −25°C 25°C 75°C 125°C 150°C 175°C V GS - Gate to Source Voltage - V GATE TO SOURCE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT VGS(off) - Gate to Source Cut-off Voltage - V 0 0.5 1.5 2.5 -60 -20 20 60 100 140 180 VDS = 10 V ID = 1 mA Tch - Channel Temperature - °C | yfs | - Forward Transfer Admittance - S 0.1 100 0.1 1 10 100 VDS = 10 V Pulsed Tch = −55°C −25°C 25°C 75°C 125°C 150°C 175°C ID - Drain Current - A DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE RDS(on) - Drain to Source On-state Resistance - mΩ 1 10 100 1000 VGS = 10 V Pulsed VGS = 4.5 V ID - Drain Current - A RDS(on) - Drain to Source On-state Resistance - mΩ 0 5 10 15 20 Pulsed ID = 42 A ID = 26 A ID = 10.4 A VGS - Gate to Source Voltage - V
Data Sheet D18202EJ2V0DS 5 NP52N06SLG DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE RDS(on) - Drain to Source On-state Resistance - mΩ -80 -40 0 40 80 120 160 200 VGS = 10 V VGS = 4.5 V ID = 26 A Puls ed Tch - Channel Temperature - °C C iss, Coss, Crss - Capacitance - pF 100 1000 10000 0.1 1 10 100 VGS = 0 V f = 1 MHz C iss C oss C rss VDS - Drain to Source Voltage - V SWITCHING CHARACTERISTICS DYNAMIC INPUT/OUTPUT CHARACTERISTICS t d(on), tr, td(off), tf - Switching Time - ns 100 0.1 1 10 100 tr td(off) td(on) tf VDD = 30 V VGS = 10 V RG = 0 Ω ID - Drain Current - A V DS - Drain to Source Voltage - V 0 5 10 15 20 25 30 35 40 VDD = 48 V / ID = 52 A VDD = 30 V / ID = 52 A VDD = 12 V / ID = 45 A VDS VGS QG - Gate Charge - nC V GS - Gate to Source Voltage - V SOURCE TO DRAIN DIODE FORWARD VOLT AGE REVERSE RECOVERY TIME vs. DIODE FORWARD CURRENT I F - Diode Forward Current - A 0.01 0.1 100 1000 00 . 511 . 5 VGS = 10 V VGS = 0 V Pulsed VGS = 4.5 V VF(S-D) - Source to Drain Voltage - V t rr - Reverse Recovery Time - ns 100 1000 0.1 1 10 100 di/dt = 100 A/μs VGS = 0 V IF - Diode Forward Current - A
Data Sheet D18202EJ2V0DS 6 NP52N06SLG PACKAGE DRAWING (Unit: mm) TO-252 (MP-3ZK) 6.5±0.2 2.3±0.1 0.5±0.1 0.76±0.12 0 to 0.25 0.5±0.1 1.0 No Plating No Plating 5.1 TYP. 1.0 TYP.6.1±0.2 0.51 MIN. 4.0 MIN.0.8 10.4 MAX. (9.8 TYP.) 4.3 MIN. 1.14 MAX. 2.3 2.3 1. Gate 2. Drain 3. Source 4. Fin (Drain) EQUIVALENT CIRCUIT Source Body Diode Gate Protection Diode Gate Drain Remark Strong electric field, when exposed to this device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. <R>
Data Sheet D18202EJ2V0DS 7 NP52N06SLG TAPE INFORMATION There are two types (-E1, -E2) of taping depending on the direction of the device. Reel sideDraw-out side MARKING INFORMATION Pb-free plating marking 52N06 LG Abbreviation of part number Lot code RECOMMENDED SOLDERING CONDITIONS The NP52N06SLG should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than thos e recommended below, please contact an NEC Electronics sales representative. For technical information, see the following website. Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html) Soldering Method Soldering Conditions Recommended Condition Symbol Infrared reflow Maximum temperature (Pack age's surface temperature): 260°C or below Time at maximum temperature: 10 seconds or less Time of temperature higher than 220°C: 60 seconds or less Preheating time at 160 to 180°C: 60 to 120 seconds Maximum number of reflow processes: 3 times Maximum chlorine content of rosin flux (percentage mass): 0.2% or less IR60-00-3 Partial heating Maximum temperature (Pin temperature): 350°C or below Time (per side of the device): 3 seconds or less Maximum chlorine content of rosin flux: 0.2% (wt.) or less P350 Caution Do not use different soldering methods together (except for partial heating).
The information in this document is current as of July, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E 02. 11-1 (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific":