NC7NP34 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

I Space saving US8 package I Ultra small MicroPak Pb-free package I 0.9V to 3.6V VCC supply operation I 3.6V overvoltage tolerant I/O’s at VCC from 0.9V to 3.6V I tPD 4.0 ns typ for 3.0V to 3.6V VCC 5.0 ns typ for 2.3V to 2.7V VCC 6.0 ns typ for 1.65V to 1.95V VCC 7.0 ns typ for 1.40V to 1.60V VCC 11.0 ns typ for 1.10V to 1.30V VCC 27.0 ns typ for 0.90V VCC I Power-Off high impedance inputs and outputs I Static Drive (IOH /IOL ) ±2.6 mA @ 3.00V VCC ±2.1 mA @ 2.30V VCC ±1.5 mA @ 1.65V VCC ±1.0 mA @ 1.40V VCC ±0.5 mA @ 1.10V VCC ±20 µA@ 0 . 9 V VCC I Low noise switching using design techniques of Quiet Series noise/EMI reduction circuitry I Ultra low dynamic power Ordering Code: Battery Life vs. VCC Supply Voltage TinyLogic ULP and ULP-A with up to 50% less power consumption can extend your battery life significantly. Battery Life = (V battery *Ibattery*.9)/(Pdevice)/24hrs/day Where, Pdevice = (ICC * VCC ) + (CPD + CL) * VCC 2 * f Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at 10MHz, with CL = 15 pF load TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. Quiet Series and MicroPak are trademarks of Fairchild Semiconductor Corporation. Order Number Product Package Description Supplied AsPackage Code Number Top Mark NC7NP34K8X MAB08A NP34 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel NC7NP34L8X MAC08A X7 8-Lead MicroPak, 1.6 mm Wide 5k Units on Tape and Reel

www.fairchildsemi.com 2 NC7NP34 Logic Symbol IEEE/IEC Pin Descriptions Function Table Y = A H = HIGH Logic Level L = LOW Logic Level Connection Diagrams Pin Assignments for US8 (Top View) Pin One Orientation Diagram AAA represents Product Code Top Mark - see ordering code Note: Orientation of Top Mark determines Pin One location. Read the Top Product Code Mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak (Top Thru View) Pin Names Description A1, A2, A3 Input Y1, Y2, Y3 Output Input Output AY LL HH

3 www.fairchildsemi.com NC7NP34 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 3) Note 1: Absolute Maximum Ratings: are those values beyond which the safety of the device cannot be guaranteed. The device should not be oper- ated at these limits. The parametric values defined in the Electrical Charac- teristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: I O Absolute Maximum Rating must be observed. Note 3: Unused inputs must be held HIGH or LOW. They may not float. Supply Voltage (VCC ) −0.5V to +4.6V DC Input Voltage (VIN) −0.5V to +4.6V DC Output Voltage (VOUT ) HIGH or LOW State (Note 2) −0.5V to VCC +0.5V VCC = 0V −0.5V to 4.6V DC Input Diode Current (IIK) VIN < 0V ±50 mA DC Output Diode Current (IOK ) VOUT < 0V −50 mA VOUT > VCC +50 mA DC Output Source/Sink Current (IOH /IOL ) ± 50 mA DC V CC or Ground Current per Supply Pin (ICC or Ground) ± 50 mA Storage Temperature Range (TSTG ) −65°C to +150°C Supply Voltage 0.9V to 3.6V Input Voltage (VIN) 0V to 3.6V Output Voltage (VOUT ) HIGH or LOW State 0V to V CC VCC = 0V 0V to 3.6V Output Current in IOH /IOL VCC = 3.0V to 3.6V ±2.6 mA VCC = 2.3V to 2.7V ±2.1 mA VCC = 1.65V to 1.95V ±1.5 mA VCC = 1.40V to 1.60V ±1.0 mA VCC = 1.10V to 1.30V ±0.5 mA VCC = 0.9V ±20 µA Free Air Operating Temperature (TA) −40°C to +85°C Minimum Input Edge Rate (∆t/∆V) VIN = 0.8V to 2.0V, VCC = 3.0V 10 ns/V Symbol Parameter VCC TA = +25°CT A = −40°C to +85°C Units Conditions (V) Min Max Min Max VIH HIGH Level 0.90 0.65 x V CC 0.65 x VCC V Input Voltage 1.10 ≤ VCC ≤ 1.30 0.65 x VCC 0.65 x VCC 1.40 ≤ VCC ≤ 1.60 0.65 x VCC 0.65 x VCC 1.65 ≤ VCC ≤ 1.95 0.65 x VCC 0.65 x VCC 2.30 ≤ VCC ≤ 2.70 1.6 1.6 3.00 ≤ VCC ≤ 3.60 2.1 2.1 VIL LOW Level 0.90 0.35 x V CC 0.35 x VCC V Input Voltage 1.10 ≤ VCC ≤ 1.30 0.35 x V CC 0.35 x VCC 1.40 ≤ VCC ≤ 1.60 0.35 x V CC 0.35 x VCC 1.65 ≤ VCC ≤ 1.95 0.35 x V CC 0.35 x VCC 2.30 ≤ VCC ≤ 2.70 0.7 0.7 3.00 ≤ VCC ≤ 3.60 0.9 0.9 VOH HIGH Level 0.90 V CC − 0.1 V CC − 0.1 V IOH = −20 µA Output Voltage 1.10 ≤ VCC ≤ 1.30 V CC − 0.1 V CC − 0.1 1.40 ≤ VCC ≤ 1.60 V CC − 0.1 V CC − 0.1 1.65 ≤ VCC ≤ 1.95 V CC − 0.1 V CC − 0.1 2.30 ≤ VCC ≤ 2.70 V CC − 0.1 V CC − 0.1 3.00 ≤ VCC ≤ 3.60 V CC − 0.1 V CC − 0.1

www.fairchildsemi.com 4 NC7NP34 Symbol Parameter VCC TA = +25°CT A = −40°C to +85°C Units Conditions (V) Min Max Min Max VOL LOW Level 0.90 0.1 0.1 V IOL = 20 µA Output Voltage 1.10 ≤ VCC ≤ 1.30 0.1 0.1 1.40 ≤ VCC ≤ 1.60 0.1 0.1 1.65 ≤ VCC ≤ 1.95 0.1 0.1 2.30 ≤ VCC ≤ 2.70 0.1 0.1 3.00 ≤ VCC ≤ 3.60 0.1 0.1 IOFF Power Off Leakage Current 0 0.5 0.5 µA0 ≤ (VI, VO ) ≤ 3.6V ICC Quiescent Supply Current 0.90 to 3.60 0.9 0.9 µAV I = VCC or GND Symbol Parameter VCC TA = +25°CT A = −40°C to +85°C Units Conditions Figure Number(V) Min Typ Max Min Max tPHL Propagation Delay 0.90 27.0 ns Figures 1, 2 tPHL Propagation Delay 0.90 30.0 ns Figures 1, 2 tPHL Propagation Delay 0.90 32.0 ns Figures 1, 2 C IN Input Capacitance 0 2.0 pF C OUT Output Capacitance 0 4.0 pF C PD Power Dissipation 0.9 to 3.60 8.0 pF VI = 0V or VCC , Capacitance f = 10 MHz

www.fairchildsemi.com 6 NC7NP34 Tape and Reel Specification TAPE FORMAT for US8 TAPE DIMENSIONS inches (millimeters) REEL DIMENSIONS inches (millimeters) Package Tape Number Cavity Cover Tape Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed K8X Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Size ABCDN W 1 W 2 W 3

7 www.fairchildsemi.com NC7NP34 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide

www.fairchildsemi.com 8 NC7NP34 TinyLogic ULP Triple Buffer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 8-Lead MicroPak, 1.6 mm Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com