NP0

NP0 YAGEO | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 14

Technical content

s DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: NP0/X7R X1/Y2 & X2 10pF to 56nF Product Specification – April 14, 2025 V.1

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification SCOPE This specification describes safety certification NP0/X7R series chip capacitors with lead -free terminations.

APPLICATIONS

 PCs, Notebook  Networking  Power supplies

FEATURES

 Supplied in tape on reel  Nickel -barrier end termination  RoHS compliant  Halogen Free compliant MARKING  SC: Safety Cap  ST: Sa fety Cap with Soft -Termination ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP CTC & 12NC All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddeess GLOBAL PART NUMBER (PREFERRED ) XX XXXX X X XXX X B X XXX (1) SERIES SC : Safety Capacitor ST : Safety Capacitor with Soft-Termination (2) SIZE – INCH BASED (METRIC) 1808 (4520) 1812(4532) 2211 (5728) 2220 (5750) (3) TOLERANCE J = ± 5% K = ± 10% M = ± 20% (4) PACKING STYLE K = Blister taping reel; Reel 7 inch (5) TC MATERIAL NPO X7R (6) IMPULSE VOLTAGE W = X1/Y2 Series for TUV/UL T = X2 Series for TUV/UL (7) PROCESS N = NP0 B = Class 2 product (8) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 121 = 12 x 101 = 120 pF

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead -free. A cross section of the structure is shown in Fig.1. Fig. 1 Surface mounted multilayer ceramic capacitor construction

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification DIMENSION Table 1 For outlines see fig. 2 TYPE L1 (MM) W (MM) T (MM) L2 / L3(MM) L4(MM) DIMENSION MIN. MAX. MIN. CODE 1808 1812 2211 2220 OOUUTTLLIINNEESS For dimension see Table 1 YNM0037 T L2 L3L4 W Fig. 2 Surface mounted multilayer ceramic capacitor dimension

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification Table 3 CASE SIZE L (MM) W (MM) T (MM) DIMENSION CODE 1808 CAPACITANCE RANGE & THICKNESS FOR NP0 X1/Y2 CAP. SC 1808, NPO ST 1808, NPO X1/Y2 X2 X1/Y2 X2 10 pF HA HA HE HE 12 pF HA HA HE HE 15 pF HA HA HE HE 18 pF HA HA HE HE 22 pF HA HA HE HE 27 pF HC HC HG HG 33 pF HC HC HG HG 39 pF HC HC HG HG 47 pF HC HC HG HG 56 pF HC HC HG HG 68 pF HC HC HG HG 82 pF HC HC HG HG 100 pF HD HD HI HI 120 pF HD HD HI HI 150 pF HD HD HI HI 180 pF HD HD HI HI 220 pF HD HD HI HI 270 pF HD HD HI HI 330 pF HD HD HI HI 390 pF HD HI 470 pF HD HI 560 pF HD HI 680 pF HD HI 820 pF HD HI 1 nF HD HI Table 2 Sizes from 1808

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification Table 4 Sizes from 1808 to 2220 CAPACITANCE RANGE & THICKNESS FOR X7R X1/Y2 AND X2 CAP. SC 1808, X7R ST 1808, X7R SC 1812, X7R ST 1812, X7R SC 2211, X7R ST 2211, X7R SC 2220, X7R ST 2220, X7R X1/Y2 X2 X1/Y2 X2 X2 X2 X1/Y2 X1/Y2 X1/Y2 X2 X1/Y2 X2 100 pF HC HG GA GE KB KF 120 pF HC HG GA GE KB KF 150 pF HC HA HG HE GA GE KB KF 180 pF HC HA HG HE GA GE KB KF 220 pF HC HA HG HE GA GE KB KF 270 pF HD HA HI HE GA GE KB KF 330 pF HD HA HI HE IA ID GA GE KB KF 390 pF HD HA HI HE IA ID GA GE KB KF 470 pF HD HA HI HE IA ID GB GF KB KF 560 pF HD HA HI HE IA ID GB GF KB KF 680 pF HD HA HI HE IA ID GB GF KB KF 820 pF HD HA HI HE IA ID GB GF KB KF 1.0 nF HD HA HI HE IA ID GC GG KB KF 1.2 nF HA HE IA ID GC GG KC KG 1.5 nF HA HE IA ID GC GG KC KG 1.8 nF HA HE IA ID GC GG KC KG 2.2 nF HA HE IA ID GC GG KC KG 2.7 nF HA HE IA ID GD GH KC KG 3.3 nF HA HE IA ID KC KG 3.9 nF IA ID KC KG 4.7 nF IB IE KC KG 5.6 nF 6.8 nF 8.2 nF 10 nF KC KG 12 nF KC KG 15 nF KC KG 18 nF KC KG 22 nF KD KH 27 nF KD KH 33 nF KD KH 39 nF KD KH 47 nF KD KH 56 nF KD KH

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification CASE SIZE L (MM) W (MM) T (MM) DIMENSION CODE 1808 1812 2211 2220 Table 5

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification Table 6 THICKNESS CLASSES AND PACKING QUANTITY DESCRIPTION SIZE THICKNESS CLASSIFICATION 12 mm TAPE WIDTH /AMOUNT PER REEL CODE (mm) Ø 180 mm, 7” Blister Safety Certification Capacitor 1808 1.25 ± 0.20 3,000 1.6 ± 0.20 2,000 2.0 ± 0.20 2,000 1812 1.25 ± 0.20 1,000 1.6 ± 0.20 1,000 2.0 ± 0.20 1,000 2211 1.6 ± 0.20 1,000 2.0 ± 0.20 1,000 2.5 ± 0.30 500 2.8 ± 0.30 500 2220 2.0 ± 0.20 1,000 2.5 ± 0.30 500 2.8 ± 0.30 500

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification

ELECTRICAL CHARACTERISTICS

NNPP00//XX77RR DDIIEELLEECCTTRRIICC CCAAPPAACCIITTOORRSS;; NNIISSNN TTEERRMMIINNAATTIIOONNSS Unless otherwise stated all electrical values apply at an ambient temperature of 20±1 °C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. Table 7 DESCRIPTION VALUE Capacitance range 10pF to 56nF Capacitance tolerance NP0 C < 10 pF ± 0.25 pF, ± 0.5 pF C ≥ 10 pF ± 5% X7R ± 10% Dissipation factor (D.F.) NP0 C < 30 pF ≤ 1 / ( 400 + 20C ) C ≥ 30 pF ≤ 0.1 % X7R ≤ 2.5 % Insulation resistance after 1 minute at Ur (DC) Rins ≥ 10 GΩ or Rins × C ≥ 500 seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): NP0 ± 30 ppm/°C X7R ± 15% Operating temperature range: NP0/X7R –55 °C to +125 °C SOLDERING RECOMMENDATION Table 9 SOLDERING METHOD SIZE 0402 0603 0805 1206 ≥ 1210 Reflow ≥ 0.1µF ≥ 1.0 µF ≥ 2.2 µF ≥ 4.7 µF Reflow only Reflow/Wave < 0.1µF < 1.0 µF < 2.2 µF < 4.7 µF --- CAPACITOR REQUIREMENT Table 8 SAFETY RATING VOLTAGE RATING WITHSTANDING VOLTAGE IMPULSE VOLTAGE X1 250 VAC 1,500 VAC 4,000 V X2 250 VAC 1,500 VAC 2,500 V Y2 250 VAC 1,500 VAC 5,000 V

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification TESTS AND REQUIREMENTS Table 10 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 60384-

4.3 The capacitors may be mounted on printed-circuit boards or

4.4 Any applicable method using × 10 magnification In accordance with specification

Capacitance 4.5.1 NP0: f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C; f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C X7R: f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C Within specified tolerance Dissipation Factor (D.F.)

4.5.2 NP0:

f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C; f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C X7R: f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C In accordance with specification Insulation Resistance

4.5.3 To apply 500 V max for 60 seconds In accordance with specification

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Characteristic

4.6 Capacitance shall be measured by the steps shown in the

following table. The capacitance change should be measured after 5 min at each specified temperature stage. Step Temperature(°C) a 25± 2 b Lower temperature± 3°C c 25± 2 d Upper Temperature± 2°C e 25± 2 (1) Class I Temperature Coefficient shall be calculated from the formula as below Temp, Coefficient = 610T xC1 C1-C2 Δ [ppm/°C] C1: Capacitance at step c C2: Capacitance at 125°C (2) Class II Capacitance Change shall be calculated from the formula as below ∆C = C1-C2 x 100% C1: Capacitance at step c C2: Capacitance at step b or d Class1: ∆ C/C: ± 30ppm Class2: X7R: ∆ C/C: ±15% Adhesion 4.15 a. A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate for size ≥ 0603 : a force of 5N applied b. A force applied until broken For size ≥ 0603: ≥ 5N No visible damage Bending IEC 60384- 4.8 Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 5 mm ∆C/C NP0: ≤ 1% or 0.5 pF whichever is greater X7R: ≤ 10% Resistance to Soldering Heat 4.9 Precondition: 150 +0/–10 °C for 1 hour, then keep for 24 ± 1 hours at room temperature Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute Preheating: for size >1206: 100 °C to 120 °C for 1 minute and 170 °C to 200 °C for 1 minute Solder bath temperature: 260 ± 5 °C Dipping time: 10 ± 0.5 seconds Recovery time: 24 ±2 hours The termination shall be well tinned ∆C/C NP0: ≤ 0.5% or 0.5 pF whichever is greater X7R: ≤ 10% D.F. within initial specified value Rins within initial specified value

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability 4.10 Unmounted chips completely immersed in a solder bath at 235 ±5 °C Dipping time: 2 ± 0.5 seconds Depth of immersion: 10 mm The termination shall be well tinned Damp Heat with Ur Load

4.13 Initial measurements; after 150 +0/-10 °C for 1

hour, then keep for 24 ± 1 hours at room temperature Duration and conditions: 500 ± 12 hours at 40 ± 2 °C; 90 to 95% RH; 1.0 Ur applied Final measurement: perform a heat treatment at 150 +0/–10 °C for 1 hour, final measurements shall be carried out 24 ± 1 hours after recovery at room temperature without load ∆C/C NP0: ≤ 2% or 1 pF whichever is greater X7R: ≤ 15% D.F. NP0: ≤ 2 x specified value X7R: ≥ 100V: ≤ 5% Rins NP0: ≥ 2,500 MΩ or Rins x Cr ≥ 25s whichever is less X7R: ≥ 500 MΩ or Rins x Cr ≥ 25s whichever is less Endurance EN132400 4.14 SC Impulse Voltage : Each individual capacitor shall be subjected to a Vp = 5.0KV (X1Y2 Class Impulse 5KV) or Vp = 2.5KV (X2 Class Impulse 2.5KV) impulse for three times before applied to endurance test. * Test temp. : 125± 3°C. * Test time : 1000 +48/-0 hrs. * Applied voltage : X capacitor : 1.25UR (312.5Vac). Y capacitor : 1.70UR (425Vac). Once every hour the voltage shall be increased to 1000Vrms for 0.1 sec. * Measurement to be made after keeping at room temp. for 24± 2 hrs (Class I) and 48± 4 hrs (Class II). Visual examination DC/C < ± 20% Voltage proof IR > 3 x10E9 Ω Robustness of Termination (Pull Strength) 4.3 SC a. A force applied for 10 sec to the line joining the terminations and in a plane parallel to the substrate. a. No visible damage b. A force applied until broken b. Force size  0603:  5N Voltage Proof 4.2.1 SC X capacitor: Applied voltage 1.075K VDC (4.3 Ur) Y capacitor: Applied voltage 1.5K VAC No breakdown or flashover

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification . REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 1 Apr. 14, 2025 - - Add NPO, 1808, X2 Series Version 0 May 21, 2024 - - New datasheet for high voltage NP0/X7R series with lead -free terminations

www.yageo.com Apr.14, 2025 V.1 Surface-Mount Ceramic Multilayer Capacitors Safety Certification X1/Y2 & X2/Y3 NP0/X7R Product specification LEGAL DISCLAIMER YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice. YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability. YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy -related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data -processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety equipment, Traffic signal equipment, Transportation equipment and Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight. Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.