NHV4-2D-RY

NHV6-0 PATLITE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 11

Technical content

Product Name: Network Signal Tower with Voice Annunciator Drawing No. Rev. Page H 1/11NHV6-3-W18

PoE *1 AC Adaptor *3 LED Unit Operating Ambient Temperature Sound Pressure Level Storage Ambient Humidity Main Unit *4 LED Unit Solid Wire / Stranded Wire: φ0.41 - 0.81mm (AWG26 - 20) Screwless terminal block 0 tiers Rated Voltage DC Jack PoE *1 AC Adaptor *3 Operating Voltage Range (30VDC@3A) inrush current 5A or less (5VDC@1mA, Minimum, Reference) Solid Wire / Stranded Wire: φ0.41 - 0.81mm (AWG26 - 20) Screwless terminal block 840g + (35g) x Signal Tower Tiers External Contact Output (Only D-type) Non-voltage contact output Mass [Tolerance ±10%] Contact Capacity Wire Diameter NHV6-D 805g + (60g) x Signal Tower Tiers (AC Adaptor not included) 795g + (35g) x Signal Tower Tiers (AC Adaptor not included) 850g + (60g) x Signal Tower Tiers NHV4-D NHV6-DP Audio Line Output 600Ω 0dBV (Unbalanced, Monaural Mini-Jack) 760g + (60g) x Signal Tower Tiers (AC Adaptor not included) 750g + (35g) x Signal Tower Tiers (AC Adaptor not included) 88dB or more Front direction from the center, at 1m, 1.8kHz sine wave played back at -6dB MP3 data of the content and use of the environment, the sound pressure level will change. NHV6 NHV4 IP 20 Insulation Resistance More than 10Mohm at 500VDC between live part and non-current carrying metallic part Withstand Voltage 1500VAC applied for 1min (10mA or less) between live part and non-current carrying metallic part without breaking insulration 20%RH - 80%RH (No Dew or Condensation) Mounting Location Indoor Only Mounting Direction Protection Rating Upright Main Unit *4 42.5 - 57VDC 0 - 40℃ (No Dew or Condensation) Operating Ambient Humidity 20%RH - 80%RH (No Dew or Condensation) Storage Ambient Temperature -10 - 60℃ (No Dew or Condensation) 40mA (per Unit, 24VDC input) , 25mA (per Unit, PoE 48VDC input) Standby: 3.5W Maximum: 6W (AC Adaptor, 100VAC input) 1.0W (per Unit, AC Adaptor, 100VAC input) Rated Current Consumption 3 tiers NHV□-3□□□ NHV□-2□□□ NHV□-1□□□ Rated Power Consumption 90 - 264VAC Standby: 120mA Maximum: 210mA (24VDC input) Standby: 115mA Maximum: 175mA (PoE 48VDC input) Input: 100 - 240VAC (50/60Hz) Output: 24VDC 21.6 - 26.4VDC Drawing No. Rev. Page H NHV□-0□□□ 1. General Specifications Model 5 tiers Environmental Condition Number of Contacts 2 tiers 1 tier NHV□-5□□□ NHV□-4□□□ 24VDC 48VDC Conforms to IEEE802.3at (PoE+) *2 4 tiers Wiring Method Number of Contacts Contact Capacity Terminal OFF condition Voltage: 24VDC Wire Diameter Wiring Method External Contact Input (Only D-type) Non-voltage contact input NPN Transistor "ON" output current @ 6mA or less per channel 2/11NHV6-3-W18

2.1. Model Number Configuration FCC Part 15 Subpart B(Class A), ICES-003(Class A) AC Adaptor USB cannot be used with PoE-powered HUBs that comply with IEEE802.3af. Ethernet (Conforms to the IEEE 802.3) 10BASE-T / 100BASE-TX / 1000BASE-T (Auto MDI / MDI-X) Refer to the Outer Dimension Drawing AC Adaptor *3 , Adhesive sheet LR6-E-RZ, RY, RG, RB, C Wireless Data Acquisition System Transmitter Drawing No. Rev. Page H UL 62368-1, CSA C22.2 No.62368-1 USB2.0/1.1 Type-A 1ch WDT-4LR-Z2 Optional Parts Wall Mounting Bracket NH-001 Partition Mounting Bracket NH-002 IPv4 / IPv6 dual stack LED Unit LED Unit LR6-E-R, Y, G, B, MZ LR4-E-R, Y, G, B *3 Excludes N-type and P-type *4 Does not include USB current consumption *5 Only N-type and P-type ・ UL/cUL Listed 2. Model ・Conforms to the CE Requirements ・Conforms to the UKCA Requirements *2 A PoE+ power supply HUB that complies with IEEE802.3at is required. *1 Only P-type EN 55032(Class A), EN 55035, EN IEC 63000 Communication Method Interface Outer Dimensions Accessories Compatible Unit (Optional) NHV6 IP Network ADP-001 (KS C 9610-6-4, KS C 9610-6-2) *5 Conformity Standards Remark WDT-6LR-Z2 NHV4 LR4-E-RZ, RY, RG, RB, C Wireless Data Acquisition System Transmitter Signal Tower Type Signal Tower Tiers Power Supply Method LED Unit Color AC Adaptor (included) R Red Y Amber G Green B Blue C White From top to bottom External I/O P Blank □ □□ PoE or AC Adaptor (not included)

4 LR4(φ40) 1 1 tier N AC Adaptor (not included)

6 LR6(φ60) 0 0 tiers

Drawing No. Rev. Page H 2.2. Model Number List NHV4-1D-R NHV4-0 NHV4-0N NHV6-0 NHV6-0N NHV4-1-R NHV4-3N-RYG NHV6-1-R NHV6-3N-RYG NHV4-1-Y NHV4-0DN NHV6-1-Y NHV6-0DN NHV4-1-G NHV4-3DN-RYG NHV6-1-G NHV6-3DN-RYG NHV4-2-RY NHV4-0DP NHV6-2-RY NHV6-0DP NHV4-2-RG NHV4-3DP-RYG NHV6-2-RG NHV6-3DP-RYG NHV4-3-RYG NHV6-3-RYG NHV4-4-RYGB NHV6-4-RYGB NHV4-5-RYGBC NHV6-5-RYGBC NHV4-0D NHV6-0D NHV6-1D-R NHV4-1D-Y NHV6-1D-Y NHV4-1D-G NHV6-1D-G NHV6-4D-RYGB NHV4-2D-RY NHV6-2D-RY NHV4-2D-RG NHV6-2D-RG NHV4-5D-RYGBC NHV6-5D-RYGBC Sound NHV4-3D-RYG NHV6-3D-RYG NHV4-4D-RYGB 3. Action Specification 3.1. Information (Main Unit) Signal Tower Lighting, Flashing pattern, and off lighting can be controlled for each LED. When playback is ended, the next available channel stored in memory will play. Playback Mode Bit Rate : 32kbit/s, 64kbit/s, 128kbit/s Constant Bit Rate (CBR) only Number of messages ON(500ms), OFF(500ms) (repetition) ON(80ms), OFF(170ms), ON(80ms), OFF(670ms) (repetition) ON(250ms), OFF(250ms) (repetition) ON(1000ms), OFF(1000ms) (repetition) Flashing pattern 1 Flashing pattern 2 Flashing pattern 3 Flashing pattern 4 Up to 71 types of messages can be played on the main unit speaker and line output. MP3 File : 60 kinds Preset : 11 kinds will be interrupted and a new channel will play. If a new playback event occurs, the channel being played back MP3 Format Preset Input Priority Playback, Memory Playback It will play back repeatedly per playback event. Number of playback times : 1 - 254 Buzzer Sound : 5 kinds Chime Sound : 3 kinds Voice Sound : 3 kinds It is played back when set up to play a certain number of times per playback event. It is played back once per playback event.One-shot Playback Repeat Playback One-shot Playback, Repeat Playback, Endless PlaybackPlayback Pattern Input Priority Playback Memory Playback Endless Playback Chime Sound : 5 kinds MP3 Format Preset Number of Notification Sounds MP3 File : 5 kinds Preset : 5 kinds Up to 10 of Notification Sounds can be played in combination with other Sound. Bit Rate : 32kbit/s, 64kbit/s, 128kbit/s Constant Bit Rate (CBR) only 4/11NHV6-3-W18

PLC Information Write Command When ”Clear operation" occurs, PLC Write Command can be executed. Number of notifications 4 Protocol SLMP (The same format as the QnA compatible 3E and 4E frame of MC protocol) FINS TCP / UDP Drawing No. Rev. Page H 3.2. External Control External contact output can be controlled when an event occurs or outputting sound. Contact Function Digital Output, BUSY Output 5 kinds of buzzer sounds Buzzer pattern 1 ON(250ms), OFF(250ms) (repetition) Buzzer pattern 2 Digital Output The digital "A Contact" or "B Contact" output for an automatic OFF function of the digital output port can be set up. in conjunction with the signal output from the line-out. 3.3. Information (Network) When an event occurs, an e-mail message is transmitted BUSY Output It controls the relay contact output Number of notifications 8 Authentication protocol SMTP certification(Password, OAuth2), POP authentication Security SSL/TLS, STARTTLS, none When an event occurs, Trap or Inform is executed. Number of notifications 8 Version v1 / v2c / v3 HTTP Notification When an event occurs, HTTP command is executed. Number of notifications 8 Protocol HTTP, HTTPS Authentication protocol Basic Access Authentication, Digest Access Authentication, none Method GET 4. Function Specification 4.1. Main Unit Control Function RSH Command Controllable with RSH Command SSH Command Controllable with SSH Command Version v1 / v2c / v3 "Clear" Button Clear operation is possible with "Clear" Button of the main unit HTTP Command Controllable with HTTP Command Socket Communication Controllable with PNS Command and PHN Command SNMP Command Controllable with SNMP "set" Command ON(500ms), OFF(500ms) (repetition) Buzzer pattern 3 ON(200ms), OFF(50ms), ON(200ms), OFF(550ms) (repetition) Buzzer pattern 4 ON(continuity) Buzzer pattern 5 ON(1000ms), OFF(1000ms) (repetition) 5/11NHV6-3-W18

*1 It can be used when e-mail or SNMP is set to "Active" in the RSH/SSH Command Configuration. *2 It is possible to play back received text data by performing speech synthesis in real time. Notification Sounds can be played in combination with before or after a synthesis sound. *3 Signal Tower "Red", "Amber" and "Green", and Flashing pattern 1 *4 Buzzer pattern1 and Buzzer pattern2 *5 In memory playback mode, you can proceed to the next message *6 It is possible to stop only the buzzer while maintaining the state of Signal Tower. Control using specific characters (control tags) included in detected email content - - SNMP Command ✓ ✓ ✓ ✓ - - - Socket PNS ✓ ✓ ✓ ✓ - - ✓*1 - Controllable Action Command Signal Tower Sound Buzzer Digi-Out e-mail SNMP HTTP Condition Agreement Detectable Type Change Detection Detectable Type Number of Condition Detection Target Mail Detection Control by the email Decision condition Sender, Subject, Body text [Matches with], [Beginning with], [Include], [Be free of] Encryption Method SSL/TLS, STARTTLS, none Mail check interval 10 - 3600 seconds Filter Rule Conditions for detecting target emails can be set. Detect incoming mail on the mail server. Protocol IMAP, IMAPS, POP3, POP3S Authentication method Password Authentication, OAuth2 Read aloud of the email Play email content with speech synthesis. INTEGER, OCTET STRING (String data, Binary data) Detection that the acquired value has changed INTEGER Monitor Function their status can be acquisitioned periodically and monitored. Monitoring Cycle 1 - 60 seconds Detection method Condition Agreement Detection : 20 Change Detection : 5 Dtection that the acquired value meets the condition Detectable Type INTEGER, OCTET STRING (String data, Binary data) SNMP Supported Equipment For SNMP Supported equipment, with SNMP command, Version v1 / v2c / v3 SNMP Trap Reception Function Trap Reception detection Version v1 / v2c / v3 Number of Reception 64 variable-bindings 2 OID per 1 Trap Reception Monitoring Cycle 1 - 600 seconds Sending Count The number of times to detect can be set from 1 to 30. Number of Sending The number of sending Ping by one monitoring can be set from 1 to 3. 4.2. External Monitoring Function Ping Monitoring Function Network abnormality detection by sending Ping network devices Number of Monitoring 24 Number of Group 3 Drawing No. Rev. Page H 6/11NHV6-3-W18

4.3. Main Unit Status Acquisition Function *1 Signal Tower "Red", "Amber" and "Green", and Flashing pattern 1 *2 Buzzer pattern 1 and Buzzer pattern 2 ✓ - ✓ ✓ - PLC Information Read Command PLC Information Read Command Detects the state change of the device information of the PLC Number of Monitoring 16 Transmission Interval Signal Sound Buzzer Digi-Out Detecting the input for a certain period of time Detection time : 1 - 3600 seconds Number of Detection : 4 HTTP MQTT Protocoｌ SLMP (The same format as the QnA compatible 3E and 4E frame of MC protocol) FINS TCP / UDP e-mail SNMP PLC Information Write CommandMonitoring External Contact Input Digital Logic Setting A Contact, B Contact Detection method Status Change Detection, Status Agreement Detection Excutable action at detection 10ms / 50ms / 100ms Status Change Detection of change from OFF to ON or change from ON to OFF Status Agreement Ping Monitoring ✓ ✓ ✓SNMP Trap Reception ✓ ✓ ✓ SNMP Supported Mail Detection *1 Monitor Function It monitors the state change of external contact input. External Contact Input XML/JSON format file ✓ ✓ ✓ ✓ ✓ PHN ✓*1 - ✓*2 - -Socket PNS ✓ - ✓ - HTTP Communication The state of the main body can be acquired in XML/JSON data format. Acquisition data Command Signal Tower Sound Buzzer Digi-In Digi-Out The state of the main body can be acquired by the status acquisition command. Socket Communication Status acquisition available with PNS Command and PHN Command SNMP Command Status acquisition available with SNMP "get" Command RSH Command Version v1 / v2c / v3 Drawing No. Rev. Page H The state of the main body can be acquired by the status acquisition command. SSH Command 7/11NHV6-3-W18

*1 Light reduction is not possible when using LR4/6-E-MZ or WDT-4/6LR-Z2. *2 Google Chrome is a trademark or registered trademark of Google LLC. *3 Microsoft Edge is registered trademark of Microsoft Corporation in the United States and other countries. *4 Text-to-speech synthesis in Chinese is supported only for production after October 2023. *1 Microsoft Azure is registered trademark of Microsoft Corporation in the United States and other countries. *2 Amazon Web Services, the "Powered by AWS"logo, and any other AWS trademarks used in such materials are trademarks of Amazon.com, Inc. or its affiliates in the United States and other countries. *3 It is possible to play back received text data by performing speech synthesis in real time. Notification Sounds can be played in combination with before or after a synthesis sound. with test button of the main body and RSH/SSH command. USB flash drive can be used to read and written configuration files, 4.4. Main Unit Setting Function The internal clock in this product can communicate with an NTP server Network setting in this product can communicate with an DHCP server Master Volume Setting Master Volume of Buzzer and Sound can be set Automatic Network Setting Time Correction Function to automatically correct the time. to automatically set. Self-test Function Supported languages Japanese (Kanji-Kana mixed text), English, Chinese *4 Config Setting Various settings of the main body can be read and written as setting file. Event Log Text-to-speech synthesis Speech synthesis from text data can be registered as voice data. USB Flash Drive Function update firmware, and download Event logs. Flash Control Setting Languages supported on the setting screen Japanese, English, Traditional Chinese, Sinplified Chinese, Korean, Thai German, French, Italian, Spanish, Mexican Standard Action Setting The color of Signal Tower that lights up after the clear operation is executed can be set. Main Unit Setting Various settings of the main body can be done with a web browser. Supported browsers Google Chrome *2 Microsoft Edge *3 Connection Settings Built-in features Main Unit Control Signal Tower, Sound *3, Buzzer, Digital Output Main Unit Status Acquisition Signal Tower, Sound, Buzzer, Digital Output Main Unit Status Transmission Signal Tower, Sound, Buzzer, "Clear" button, Digital Output, Digital Input Cloud-to-device Message AWS IoT Core Device Shadow, MQTT client Azure Connection Settings Built-in features AWS 4.5. Cloud Function Supported Cloud Platform Microsoft Azure *1 Amazon Web Services (AWS) *2 Azure IoT Central/DPS, Azure IoT Hub (IoT Plug and Play) Device Twin, Direct Method, Device-to-cloud Message, Drawing No. Rev. Page H Event logs can be downloaded via web browser and USB flash drive. The brightness of the LED unit can be reduced.*1 Self test of Signal Tower and buzzer is possible 8/11NHV6-3-W18

NHV6 (Unit: mm) 3 tiers 270 4 tiers 310 5 tiers 350

3 Main Body ABS Off-white/Medium Gray 2 tiers 230

2 LED Unit PC Clear 1 tier 190

1 Head Cover PC Off-white 0 tiers 150

No. Parts name Material Color Number of LED L Drawing No. Rev. Page H 9/11NHV6-3-W18

NHV4 (Unit: mm) 3 tiers 270 4 tiers 310 5 tiers 350 No. Parts name Material Color Number of LED L Drawing No. Rev. Page H 10/11NHV6-3-W18

(Unit: mm) Drawing No. Rev. Page H 11/11NHV6-3-W18