NHP140SF ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

  • Fast Soft Switching for Reduced EMI and Higher Efficiency
  • Low Profile − Maximum Height of 1.0 mm
  • Small Footprint − Footprint Area of 5.94 mm2
  • NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
  • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant Mechanical Characteristics:
  • Case: Molded Epoxy
  • Epoxy Meets UL 94 V−0 @ 0.125 in
  • Weight: 11.7 mg (Approximately)
  • Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Maximum for 10 Seconds
  • MSL 1

Applications

  • Automotive HID Lighting
  • Diesel Piezo Injection
  • Power Factor Correction in Mini Adapters
  • Freewheeling Diode Where Space is at a Premium MARKING DIAGRAM P14 = Specific Device Code M = Date Code /C0071 = Pb−Free Package (Note: Microdot may be in either location) www.onsemi.com SOD−123FL CASE 498 ULTRAFAST RECTIFIER

1.0 AMPERES

400 VOLTS

Device Package Shipping †

ORDERING INFORMATION

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. NHP140SFT3G SOD−123 (Pb−Free) 10000/Tape & Reel P14M/C0071 /C0071 NRVHP140SFT3G SOD−123 (Pb−Free) 10000/Tape & Reel

NHP140SF, NRVHP140SF www.onsemi.com MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 400 V Average Rectified Forward Current (TL = 164°C) IO 1.0 A Peak Repetitive Forward Current (Square Wave, 20 kHz, TL = 164°C) IFRM 2.0 A Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 25 A Storage and Operating Junction Temperature Range (Note 1) Tstg, TJ −65 to +175 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/R/C0113JA. THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance, Junction−to−Lead (Note 2) /C0089JCL 12 °C/W Thermal Resistance, Junction−to−Ambient (Note 2) R/C0113JA 86.7 °C/W Thermal Resistance, Junction−to−Ambient (Note 3) R/C0113JA 330 °C/W

ELECTRICAL CHARACTERISTICS

Characteristic Test Conditions Symbol Typ Max Unit Instantaneous Forward Voltage (Note 4) (IF = 1 A, TC = 125°C) (IF = 1 A, TC = 25°C) (IF = 2 A, TC = 125°C) (IF = 2 A, TC = 25°C) VF 0.9 1.1 1.01 1.2 1.10 1.25 1.20 1.40 V Instantaneous Reverse Current (Note 4) (Rated DC Voltage, TC = 125°C) (Rated DC Voltage, TC = 25°C) IR 5 0.015 0.5 /C0109A Reverse Recovery Time Peak Reverse Recovery Current Total Reverse Recovery Charge Softness Factor (IF = 1 A, dIF/dt = −50 A//C0109s, TC = 25°C) trr IRM Qrr S 0.68 6.45 1.4 ns A nC Reverse Recovery Time Peak Reverse Recovery Current Total Reverse Recovery Charge Softness Factor (IF = 1 A, dIF/dt = −50 A//C0109s, TC = 125°C) trr IRM Qrr S 0.86 1.9 ns A nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Mounted with 700 mm 2 copper pad size (Approximately 1 in2) 1 oz FR4 Board. 3. Mounted with pad size approximately 20 mm 2 copper, 1 oz FR4 Board. 4. Pulse Test: Pulse Width ≤ 380 /C0109s, Duty Cycle ≤ 2.0%.

SOD−123−2 1.65x2.70x0.90 CASE 498 ISSUE E DATE 22 AUG 2023 XXXM/C0071 /C0071 XXX = Specific Device Code M = Date Code /C0071 = Pb−Free Package GENERIC MARKING DIAGRAM* (Note: Microdot may be in either location) *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “/C0071”, may or may not be present. Some products may not follow the Generic Marking. MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS 98AON11184DDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1SOD−123−2 1.65x2.70x0.90 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com

onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales