NH245

SN74LVC8T245_07 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

www.ti.com

FEATURES

DB, DBQ, DGV, OR PW PACKAGE (TOP VIEW) VCCA DIR GND GND V CCB VCCB OE GND RHL PACKAGE (TOP VIEW) 1 24 12 13 VCCB OE DIR GND GND V GND CCB VCCA DESCRIPTION/ORDERING INFORMATION SN74LVC8T245 8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES584A JUNE 2005 REVISED AUGUST 2005 Control Inputs V IH IL Levels Are Referenced Latch-Up Performance Exceeds 100 mA Per to V CCA Voltage JESD 78, Class II V CC Isolation Feature If Either V CC Input Is at ESD Protection Exceeds JESD GND, All Are in the High-Impedance State 4000-V Human-Body Model (A114-A) Fully Configurable Dual-Rail Design Allows 200-V Machine Model (A115-A) Each Port to Operate Over the Full 1.65-V to 1000-V Charged-Device Model (C101) 5.5-V Power-Supply Range This 8-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74LVC8T245 is optimized to operate with V CCA and V CCB set at 1.65 V to 5.5 The A port is designed to track V CCA V CCA accepts any supply voltage from 1.65 V to 5.5 The B port is designed to track V CCB V CCB accepts any supply voltage from 1.65 V to 5.5 This allows for universal low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5.5-V voltage nodes. ORDERING INFORMATION T A PACKAGE (1) ORDERABLE PART NUMBER TOP-SIDE MARKING QFN RHL Tape and reel SN74LVC8T245RHLR NH245 SSOP DBR Tape and reel SN74LVC8T245DBR NH245 SSOP (QSOP) DBQ Tape and reel SN74LVC8T245DBQR NH245 C to C Tube SN74LVC8T245PW TSSOP PW NH245 Tape and reel SN74LVC8T245PWR TVSOP DGV Tape and reel SN74LVC8T245DGVR NH245 (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical

applications

sheet. PRODUCTION DATA information is current as of publication date. Copyright 2005, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

www.ti.com DESCRIPTION/ORDERING INFORMATION (CONTINUED) DIR OE To Seven Other Channels SN74LVC8T245 8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES584A JUNE 2005 REVISED AUGUST 2005 The SN74LVC8T245 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable OE input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess I CC and I CCZ The SN74LVC8T245 is designed so that the control pins (DIR and OE are supplied by V CCA This device is fully specified for partial-power-down I off The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The V CC isolation feature ensures that if either V CC input is at GND, all outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. FUNCTION TABLE (1) (EACH 8-BIT SECTION) CONTROL INPUTS OUTPUT CIRCUITS OPERATION OE DIR A PORT B PORT L L Enabled Hi-Z B data to A bus L H Hi-Z Enabled A data to B bus H X Hi-Z Hi-Z Isolation (1) Input circuits of the data I/Os are always active. LOGIC DIAGRAM (POSITIVE LOGIC)

www.ti.com Absolute Maximum Ratings (1) SN74LVC8T245 8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES584A JUNE 2005 REVISED AUGUST 2005 over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT V CCA Supply voltage range 0.5 6.5 V V CCB I/O ports port) 0.5 6.5 V I Input voltage range (2) I/O ports port) 0.5 6.5 V Control inputs 0.5 6.5 A port 0.5 6.5 Voltage range applied to any output V O V in the high-impedance or power-off state (2) B port 0.5 6.5 A port 0.5 V CCA 0.5 V O Voltage range applied to any output in the high or low state (2) (3) V B port 0.5 V CCB 0.5 I IK Input clamp current V I mA I OK Output clamp current V O mA I O Continuous output current mA Continuous current through each V CCA V CCB and GND 100 mA DB package DBQ package θ JA Package thermal impedance (4) DGV package C/W PW package RHL package T stg Storage temperature range 150 C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. (3) The output positive-voltage rating may be exceeded up to 6.5 V maximum if the output current rating is observed. (4) The package thermal impedance is calculated in accordance with JESD 51-7.

www.ti.com Recommended Operating Conditions (1) (2) (3) (4) SN74LVC8T245 8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES584A JUNE 2005 REVISED AUGUST 2005 V CCI V CCO MIN MAX UNIT V CCA 1.65 5.5 Supply voltage V V CCB 1.65 5.5 1.65 V to 1.95 V V CCI 0.65 2.3 V to 2.7 V 1.7 High-level V IH Data inputs (5) V input voltage V to 3.6 V 4.5 V to 5.5 V V CCI 0.7 1.65 V to 1.95 V V CCI 0.35 2.3 V to 2.7 V 0.7 Low-level V IL Data inputs (5) V input voltage V to 3.6 V 0.8 4.5 V to 5.5 V V CCI 0.3 1.65 V to 1.95 V V CCA 0.65 2.3 V to 2.7 V 1.7 High-level Control inputs V IH V input voltage (referenced to V CCA (6) V to 3.6 V 4.5 V to 5.5 V V CCA 0.7 1.65 V to 1.95 V V CCA 0.35 2.3 V to 2.7 V 0.7 Low-level Control inputs V IL V input voltage (referenced to V CCA (6) V to 3.6 V 0.8 4.5 V to 5.5 V V CCA 0.3 V I Input voltage Control inputs 5.5 V Active state V CCO V Input/output V I/O voltage 3-State 5.5 V 1.65 V to 1.95 V 2.3 V to 2.7 V I OH High-level output current mA V to 3.6 V 4.5 V to 5.5 V 1.65 V to 1.95 V 2.3 V to 2.7 V I OL Low-level output current mA V to 3.6 V 4.5 V to 5.5 V 1.65 V to 1.95 V 2.3 V to 2.7 V Input transition Δ Δ v Data inputs ns/V rise or fall rate V to 3.6 V 4.5 V to 5.5 V T A Operating free-air temperature C (1) V CCI is the V CC associated with the data input port. (2) V CCO is the V CC associated with the output port. (3) All unused or driven (floating) data inputs (I/Os) of the device must be held at logic HIGH or LOW (preferably V CCI or GND) to ensure proper device operation and minimize power. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. (4) All unused control inputs must be held at V CCA or GND to ensure proper device operation and minimize power comsumption. (5) For V CCI values not specified in the data sheet, V IH min V CCI 0.7 V IL max V CCI 0.3 (6) For V CCA values not specified in the data sheet, V IH min V CCA 0.7 V IL max V CCA 0.3

www.ti.com Electrical Characteristics (1) (2) SN74LVC8T245 8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES584A JUNE 2005 REVISED AUGUST 2005 over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS V CCA V CCB MIN TYP MAX MIN MAX UNIT I OH 100 µ V I V IH 1.65 V to 4.5 V 1.65 V to 4.5 V V CCO 0.1 I OH mA, V I V IH 1.65 V 1.65 V 1.2 V OH I OH mA, V I V IH 2.3 V 2.3 V 1.9 V I OH mA, V I V IH V V 2.4 I OH mA, V I V IH 4.5 V 4.5 V 3.8 I OL 100 µ V I V IL 1.65 V to 4.5 V 1.65 V to 4.5 V 0.1 I OL mA, V I V IL 1.65 V 1.65 V 0.45 V OL I OL mA, V I V IL 2.3 V 2.3 V 0.3 V I OL mA, V I V IL V V 0.55 I OL mA, V I V IL 4.5 V 4.5 V 0.55 I I DIR V I V CCA or GND 1.65 V to 5.5 V 1.65 V to 5.5 V µ A V to 5.5 V A or B I off V I or V O to 5.5 V µ A port to 5.5 V V A or B V O V CCO or GND, I OZ 1.65 V to 5.5 V 1.65 V to 5.5 V µ A port OE V IH 1.65 V to 5.5 V 1.65 V to 5.5 V I CCA V I V CCI or GND, I O V V µ A V V 1.65 V to 5.5 V 1.65 V to 5.5 V I CCB V I V CCI or GND, I O V V µ A V V I CCA I CCB V I V CCI or GND, I O 1.65 V to 5.5 V 1.65 V to 5.5 V µ A One A port at V CCA 0.6 A port DIR at V CCA B port open Δ I CCA V to 5.5 V V to 5.5 V µ A DIR at V CCA 0.6 DIR B port open, A port at V CCA or GND One B port at V CCB 0.6 Δ I CCB B port V to 5.5 V V to 5.5 V µ A DIR at GND, A port open Control C i V I V CCA or GND 3.3 V 3.3 V pF inputs A or B C io V O V CCA/B or GND 3.3 V 3.3 V 8.5 pF port (1) V CCO is the V CC associated with the output port. (2) V CCI is the V CC associated with the input port.

www.ti.com Switching Characteristics Switching Characteristics SN74LVC8T245 8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES584A JUNE 2005 REVISED AUGUST 2005 over recommended operating free-air temperature range, V CCA 1.8 V 0.15 V (unless otherwise noted) (see Figure V CCB 1.8 V V CCB 2.5 V V CCB 3.3 V V CCB V FROM TO 0.15 V 0.2 V 0.3 V 0.5 V PARAMETER UNIT (INPUT) (OUTPUT) MIN MAX MIN MAX MIN MAX MIN MAX t PLH A B 1.7 21.9 1.3 9.2 7.4 0.8 7.1 ns t PHL t PLH B A 0.9 23.8 0.8 23.6 0.7 23.4 0.7 23.4 ns t PHL t PHZ OE A 1.5 29.6 1.5 29.4 1.5 29.3 1.4 29.2 ns t PLZ t PHZ OE B 2.4 32.2 1.9 13.1 1.7 1.3 10.3 ns t PLZ t PZH OE A 0.4 0.4 23.8 0.4 23.7 0.4 23.7 ns t PZL t PZH OE B 1.8 1.5 1.2 12.6 0.9 10.8 ns t PZL over recommended operating free-air temperature range, V CCA 2.5 V 0.2 V (unless otherwise noted) (see Figure V CCB 1.8 V V CCB 2.5 V V CCB 3.3 V V CCB V FROM TO 0.15 V 0.2 V 0.3 V 0.5 V PARAMETER UNIT (INPUT) (OUTPUT) MIN MAX MIN MAX MIN MAX MIN MAX t PLH A B 1.5 21.4 1.2 0.8 6.2 0.6 4.8 ns t PHL t PLH B A 1.2 9.3 9.1 8.9 0.9 8.8 ns t PHL t PHZ OE A 1.4 1.4 1.4 1.4 ns t PLZ t PHZ OE B 2.3 29.6 1.8 1.7 9.3 0.9 6.9 ns t PLZ t PZH OE A 10.9 10.9 10.9 10.9 ns t PZL t PZH OE B 1.7 28.2 1.5 12.9 1.2 9.4 6.9 ns t PZL

www.ti.com Switching Characteristics Switching Characteristics Operating Characteristics SN74LVC8T245 8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES584A JUNE 2005 REVISED AUGUST 2005 over recommended operating free-air temperature range, V CCA 3.3 V 0.3 V (unless otherwise noted) (see Figure V CCB 1.8 V V CCB 2.5 V V CCB 3.3 V V CCB V FROM TO 0.15 V 0.2 V 0.3 V 0.5 V PARAMETER UNIT (INPUT) (OUTPUT) MIN MAX MIN MAX MIN MAX MIN MAX t PLH A B 1.5 21.2 1.1 8.8 0.8 6.3 0.5 4.4 ns t PHL t PLH B A 0.8 7.2 0.8 6.2 0.7 6.1 0.6 ns t PHL t PHZ OE A 1.6 8.2 1.6 8.2 1.6 8.2 1.6 8.2 ns t PLZ t PHZ OE B 2.1 1.7 10.3 1.5 8.6 0.8 6.3 ns t PLZ t PZH OE A 0.8 8.1 0.8 8.1 0.8 8.1 0.8 8.1 ns t PZL t PZH OE B 1.8 27.7 1.4 12.4 1.1 8.5 0.9 6.4 ns t PZL over recommended operating free-air temperature range, V CCA V 0.5 V (unless otherwise noted) (see Figure V CC 1.8 V V CC 2.5 V V CC 3.3 V V CC V FROM TO 0.15 V 0.2 V 0.3 V 0.5 V PARAMETER UNIT (INPUT) (OUTPUT) MIN MAX MIN MAX MIN MAX MIN MAX t PLH A B 1.5 21.4 8.8 0.7 0.4 4.2 ns t PHL t PLH B A 0.7 0.4 4.8 0.3 4.5 0.3 4.3 ns t PHL t PHZ OE A 0.3 5.4 0.3 5.4 0.3 5.4 0.3 5.4 ns t PLZ t PHZ OE B 28.7 1.6 9.7 1.4 0.7 5.7 ns t PLZ t PZH OE A 0.7 6.4 0.7 6.4 0.7 6.4 0.7 6.4 ns t PZL t PZH OE B 1.5 27.6 1.3 11.4 8.1 0.9 ns t PZL T A C V CCA V CCA V CCA V CCA TEST V CCB 1.8 V V CCB 2.5 V V CCB 3.3 V V CCB V PARAMETER UNIT CONDITIONS TYP TYP TYP TYP A-port input, B-port output C pdA (1) C L B-port input, A-port output f MHz, pF A-port input, B-port output t r t f ns C pdB (1) B-port input, A-port output (1) Power dissipation capacitance per transceiver

www.ti.com PARAMETER MEASUREMENT INFORMATION VOH VOL From Output CL (see Note A) LOAD CIRCUIT 2 × VCCO Open GND RL RL tPLH tPHL Output Control (low-level enabling) Output Waveform 1 S1 at 2 × VCCO (see Note B) Output Waveform 2 S1 at GND (see Note B) tPZL tPZH tPLZ tPHZ VCCA/2VCCA/2 VCCI/2 VCCI/2 VCCI 0 V VCCO/2 VCCO/2 VOH VOL 0 V VCCO/2 VOL + VTP VCCO/2 VOH − VTP 0 V VCCI 0 V VCCI/2 VCCI/2 tw Input VCCA VCCO VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES Output Input tpd tPLZ/tPZL tPHZ/tPZH Open 2 × VCCO GND TEST S1 NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR10 MHz, ZO = 50 Ω , dv/dt ≥/char????????1 V/ns. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. VCCI is the VCC associated with the input port. I. VCCO is the VCC associated with the output port. J. All parameters and waveforms are not applicable to all devices. 1.8 V ± 0.15 V 2.5 V ± 0.2 V 3.3 V ± 0.3 V 5 V ± 0.5 V 2 kΩ 2 kΩ 2 kΩ 2 kΩ VCCO RL 0.15 V 0.15 V 0.3 V 0.3 V VTP CL 15 pF 15 pF 15 pF 15 pF SN74LVC8T245 8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS SCES584A JUNE 2005 REVISED AUGUST 2005 Figure Load Circuit and Voltage Waveforms

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) 74LVC8T245DBQRG4 ACTIVE SSOP/ QSOP DBQ 24 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR 74LVC8T245RHLRG4 ACTIVE QFN RHL 24 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR SN74LVC8T245DBQR ACTIVE SSOP/ QSOP DBQ 24 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR SN74LVC8T245DBR ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC8T245DBRE4 ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC8T245DGVR ACTIVE TVSOP DGV 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC8T245DWR ACTIVE SOIC DW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC8T245NSR ACTIVE SO NS 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC8T245PW ACTIVE TSSOP PW 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC8T245PWE4 ACTIVE TSSOP PW 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC8T245PWR ACTIVE TSSOP PW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC8T245PWRE4 ACTIVE TSSOP PW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC8T245RHLR ACTIVE QFN RHL 24 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 Addendum-Page 1

incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 Addendum-Page 2

MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE

24 PINS SHOWN

3,70 3,50 4,90 5,10 20DIM PINS ** 4073251/E 08/00 1,20 MAX Seating Plane 0,05 0,15 0,25 0,50 0,75 0,23 0,13 11 2 24 13 4,30 4,50 0,16 NOM Gage Plane A 7,90 7,70 382416 4,90 5,103,70 3,50 A MAX A MIN 6,60 6,20 11,20 11,40 9,60 9,80 0,08 M0,070,40 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. D. Falls within JEDEC: 24/48 Pins – MO-153 14/16/20/56 Pins – MO-194

MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 4040065 /E 12/01

28 PINS SHOWN

8,20 7,40 0,55 0,95 0,25 12,90 12,30 10,50 8,50 Seating Plane 9,907,90 10,50 9,90 0,38 5,60 5,00 0,22 A 2016 6,506,50 0,05 MIN 5,905,90 DIM A MAX A MIN PINS ** 2,00 MAX 6,90 7,50 0,65 M0,15 0°–/C02578° 0,10 0,09 0,25 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150

MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE

14 PINS SHOWN

0,65 M0,10 0,10 0,25 0,50 0,75 0,15 NOM Gage Plane 9,80 9,60 7,90 7,70 2016 6,60 6,40 4040064/F 01/97 0,30 6,60 6,20 0,19 4,30 4,50 0,15 A 1,20 MAX 5,10 4,90 3,10 2,90 A MAX A MIN DIM PINS ** 0,05 4,90 5,10 Seating Plane 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-153

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Cu stomers should obtain the latest relevant information before placing orders and should verify that such info rmation is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by governm ent requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI component s. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implie d, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are us ed. Information published by TI regarding third-party products or services does not consti tute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the pat ents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, lim itations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements diffe rent from or beyond the parameters stated by TI for that product or service voids all express and any imp lied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.c om Audio www.ti.com/audio Data Converters dataconverter.ti.co m Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 6553 03 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated