DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Features
- 32-position Linear Taper Potentiometer
- Non-volatile EEPROM Wiper Storage
- Low Standby Current
- Single Supply Operation: 2.5 V − 6.0 V
- Increment Up/Down Serial Interface
- Resistance Values: 10 k/C0087, 50 k/C0087 and 100 k/C0087
- Available in SOIC, TSSOP, MSOP and Space Saving 2 × 3 mm TDFN Packages
- These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant
Applications
- Automated Product Calibration
- Remote Control Adjustments
- Offset, Gain and Zero Control
- Tamper-proof Calibrations
- Contrast, Brightness and V olume Controls
- Motor Controls and Feedback Systems
- Programmable Analog Functions www.onsemi.com PIN CONFIGURATIONS RH RW RL U/D INC VCC CS See detailed ordering and shipping information in the package dimensions section on page 9 of this data sheet.
ORDERING INFORMATION
SOIC−8 V SUFFIX CASE 751BD MSOP−8 Z SUFFIX CASE 846AD GND SOIC (V), MSOP (Z) TSSOP−8 Y SUFFIX CASE 948AL TSSOP (Y) (Top Views) GND RH U/D INC RW CS VCC RL TDFN−8 VP2 SUFFIX CASE 511AK TDFN (VP2) GND RH U/D INC RW CS VCC RL
Table 1. PIN DESCRIPTIONS determined by the condition of the U/D input. The U/D input controls the direction of the wiper movement. wiper to move one increment towards the RL terminal. exceed the supply voltage, VCC or go below ground, GND. GND. RL and RH are electrically interchangeable. power up to a preset value stored in nonvolatile memory.
Table 2. OPERATION MODES Figure 4. Potentiometer Equivalent Circuit Table 3. ABSOLUTE MAXIMUM RATINGS should not be assumed, damage may occur and reliability may be affected. Table 4. RELIABILITY CHARACTERISTICS
- This parameter is tested initially and after a design or process change that affects the parameter.
- Latch-up protection is provided for stresses up to 100 mA on address and data pins from −1 V to V CC + 1 V.
Table 5. DC ELECTRICAL CHARACTERISTICS (VCC = +2.5 V to +6 V unless otherwise specified) performance may not be indicated by the Electrical Characteristics if operated under different conditions.
- This parameter is tested initially and after a design or process change that affects the parameter.
- Latch−up protection is provided for stresses up to 100 mA on address and data pins from −1 V to V
- These parameters are periodically sampled and are not 100% tested.
Table 6. AC TEST CONDITIONS Table 7. AC OPERATING CHARACTERISTICS (VCC = +2.5 V to +6.0 V, VH = VCC, VL = 0 V, unless otherwise specified)
- Typical values are for T A = 25°C and nominal supply voltage.
- This parameter is periodically sampled and not 100% tested.
- MI in the A.C. Timing diagram refers to the minimum incremental change in the W output due to a change in the wiper position.
Figure 5. A.C. Timing
Table 8. ORDERING INFORMATION Specifications Brochure, BRD8011/D. 10.All packages are RoHS-compliant (Pb-Free, Halogen-Free).
- The standard lead finish is NiPdAu.
12.For additional package and temperature options, please contact your nearest ON Semiconductor Sales office.
www.onsemi.com PACKAGE DIMENSIONS SOIC 8, 150 mils CASE 751BD ISSUE O E1 E A h θ L c e b D PIN # 1 IDENTIFICATION TOP VIEW SIDE VIEW END VIEW Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MS-012. SYMBOL MIN NOM MAX θ A b c D E e h 0º 8º 0.10 0.33 0.19 0.25 4.80 5.80 3.80
1.27 BSC
1.75 0.25 0.51 0.25 0.50 5.00 6.20 4.00 L 0.40 1.27 1.35
www.onsemi.com PACKAGE DIMENSIONS MSOP 8, 3x3 CASE 846AD ISSUE O E1E A1 e b D c A TOP VIEW SIDE VIEW END VIEW L DETAIL A DETAIL A Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MO-187. SYMBOL MIN NOM MAX /C0113 θ A b c D E e L 0º 6º 0.05 0.75 0.22 0.13 0.40 2.90 4.80 2.90
0.65 BSC
0.25 BSC
1.10 0.15 0.95 0.38 0.23 0.80 3.10 5.00 3.10 0.60 3.00 4.90 3.00 L1 0.95 REF 0.10 0.85
www.onsemi.com PACKAGE DIMENSIONS TDFN8, 2x3 CASE 511AK ISSUE A PIN#1 IDENTIFICATION E2E ebD TOP VIEW SIDE VIEW BOTTOM VIEW PIN#1 INDEX AREA FRONT VIEW A LD2 Notes: (1) All dimensions are in millimeters. (2) Complies with JEDEC MO-229. SYMBOL MIN NOM MAX A 0.70 0.75 0.80 A1 0.00 0.02 0.05 A3 0.20 REF b 0.20 0.25 0.30 D 1.90 2.00 2.10 D2 1.30 1.40 1.50 E 3.00 E2 1.20 1.30 1.40 e 2.90
0.50 TYP
3.10 L 0.20 0.30 0.40 A2 0.45 0.55 0.65
www.onsemi.com PACKAGE DIMENSIONS TSSOP8, 4.4x3 CASE 948AL ISSUE O E1 E e b D cA TOP VIEW SIDE VIEW END VIEW /C01131 L Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MO-153. SYMBOL θ MIN NOM MAX A b c D E e 0º 8º L 0.05 0.80 0.19 0.09 0.50 2.90 6.30 4.30
1.00 REF
1.20 0.15 1.05 0.30 0.20 0.75 3.10 6.50 4.50 0.90 0.60 3.00 6.40 4.40 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 N57M5114/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative