N5101 MPSIND | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com sales@mpsind.com 1XN RJ-45 10/100 BASE-T JACK WITH MAGNETIC MODULE N5101 SERIES

  • RJ-45 1xN, Tab-Down, 8 pin with internal magnetics
  • Available with and without LEDs
  • Suitable for CAT 5 and 6 Fast Ethernet cable or better UTP
  • Minimum 1500VRMS isolation per IEEE 802.3 requirement
  • Operating temperature range: 0oC to +70oC
  • RoHS compliant product Industries ELECTRICAL SPECIFICATION @ 25OC Part Number 1xN Turns Ratio ±2% Insertion Loss 0.1-100MHz (dB) Max Retrun Loss (dB) Min MHz Cross Talk (dB) Typ MHz CMR (dB) Typ MHz TX RX 1-30 30-60 60-80 1-100 30-100 N5101-2 1x2 1CT:1 1CT:1 -1.1 -18 -14 -12 -40 -35 N5101-4 1x4 1CT:1 1CT:1 -1.1 -18 -14 -12 -40 -35 N5101-6 1x6 1CT:1 1CT:1 -1.1 -18 -14 -12 -40 -35 N5101-8 1x8 1CT:1 1CT:1 -1.1 -18 -14 -12 -40 -35
  • Inductance: 350μH Min @ 100KHz, 0.1VRMS with 8mA DC
  • Hipot: 1500VRMS, 1 minute Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 SCHEMATIC DIMENSIONS: N5101-2

13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com sales@mpsind.com 1XN RJ-45 10/100 BASE-T JACK WITH MAGNETIC MODULE N5101 SERIES Industries Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 DIMENSIONS: N5101-4 DIMENSIONS: N5101-6

13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com sales@mpsind.com 1XN RJ-45 10/100 BASE-T JACK WITH MAGNETIC MODULE N5101 SERIES Industries Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 DIMENSIONS: N5101-8