N33372-2202RB

78-5100-0771-5 3M | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

DIMENSIONS: INCHES [MM] [MM] IS REF. ONLY NOTES 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION. .100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE 3M ELECTRONIC MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3mconnectors.com TM THREE-WALL HEADER, 3000 SERIES R * MILITARY (WITH 3M'S N3518 POLARIZING KEY) AND CENTERBUMP POLARIZATION. * LOW PROFILE. * OPTIONAL EJECTOR LATCHES. * MOUNTING HOLES FOR SECURING HEADER TO BOARD. * THREE WALL SHROUD PROVIDES DESIGN FLEXIBILITY. * SOLDER TAIL AND WRAP TAIL OPTIONS. * OPTIONAL POLARIZING POSTS AVAILABLE. * HIGH TERMERATURE INSULATOR SUITABLE FOR "NO LEAD" SOLDERING OPERATIONS. * SUITABLE FOR REFLOW SOLDERING USING "PASTE IN HOLE" TECHNIQUES. PHYSICAL: ELECTRICAL: TEMPERATURE RATING: -55 C TO 105 C PROCESS RATING: 260 C, PER J-STD-020C, SINGLE PASS MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C) CURRENT RATING: 5.00A, 1 CONTACT POWERED 3.00A, 6 CONTACTS POWERED 1.75A, ALL CONTACTS POWERED RATING CONDITIONS: EIA-364-070 METHOD 2, 30 C MAXIMUM TEMPERATURE RISE, 20% DERATED. REFERENCE APPROPRIATE 3M PRODUCT SPECIFICATION FOR DETAILED CURRENT DERATING CURVES. INSULATION RESISTANCE: >1 X 10 AT 500 V DC WITHSTANDING VOLTAGE: 1,000V RMS AT SEA LEVEL ENVIRONMENTAL: INSULATOR: MATERIAL: GLASS FILLED POLYESTER (PCT) FLAMMABILITY: UL94V-0 COLOR: BLACK CONTACT: MATERIAL: COPPER ALLOY PLATING: UNDER PLATING: 100 " [2.54 m] NICKEL-OVERALL WIPING AREA: 30 " [0.76 m] AVG. GOLD SOLDER TAILS: 200 " [5.08 m] TIN LEAD OR MATTE TIN (SEE ORDERING INFORMATION) MARKINGS: 3M LOGO, PART IDENTIFICATION NUMBER AND ORIENTATION TRIANGLE UL FILE NO: E68080 N= HIGH TEMP BLACK (PCT)/(RB PLATING REQ'D) BLANK= (UB PLATING) PLATING: X3XXXX-XXXXXX RB = 30 " [0.76 m] GOLD AND 200 " [5.08 m] MATTE TIN (APP. E1 & C1 APPLY) UB = 30 " [0.76 m] GOLD AND 200 " [5.08 m] TIN LEAD (APP. E3 & C2 APPLY)

ORDERING INFORMATION

LATCH/EJECTOR SYSTEM: 0 = NO LATCH/EJECTOR INSTALLED 2 = SHORT ROLL PIN LATCH/EJECTORS 3 = LONG ROLL PIN LATCH/EJECTORS TAIL: 02 = FOR .062 [1.57] THICK BOARD 03 = FOR .094 TO .125 [2.39 TO 3.18] THICK BOARD K2 = KINKED FOR .062 [1.57] THICK BOARD 3M PART NUMBER: (SEE TABLE 1) PIN CONFIGURATION: 1 = RIGHT ANGLE SOLDER TAILS 2 = STRAIGHT SOLDER TAILS -X0XX -X2XX -X3XX HEADER WITHOUT LATCH EJECTOR HEADER WITH SHORT LATCH EJECTOR FOR 3M SOCKETS WITHOUT STRAIN RELIEF HEADER WITH LONG LATCH EJECTOR FOR 3M SOCKETS WITH STRAIN RELIEF .68 17.4 DIM. "A" .97 24.7 1.07 27.2 .37 9.5 .46 11.7 .08 2.0 .08 2.0 NOTCHES A & C WILL ACCOMODATE 3M POLARIZING KEY: N3518). MOUNTING HARDWARE: FROM SOLDER SIDE OF PC BOARD USE #4-24 THREAD CUTTING SCREW (3M PART #3341-5) WITH .116 [2.95] MOUNTING HOLE. FOR RIGHT ANGLE VERSION ONLY: #2-56 BOLT AND NUT (3M PART MOUNTING HOLE MAY BE USED. THE RECOMMENDED PCB HOLE SIZE FOR THE KINKED TAIL POSITIONS ON THE .112 SOLDER TAIL CONNECTOR IS .035 .002. (SEE K2 VERSION). .424 .010 10.77 0.25 .573 .010 14.55 0.25 12345678 8 7 6 5 4 3 2 1 A B C D D C B A OFSHT MODEL SIZE DET. LISTS CAGE NUMBER DRAWING NO. REV. TITLE 3M COPYRIGHTC 3M Center St. Paul, MN 55144 CHKD DATE APPVL DATE DRFT DATE MFG DATE CHKDDRFTREV ECO ISSUE DATE AND DESCRIPTION DRAWING NUMBER REVISION ACCESS CODES DESIGN REFERENCE NEXT ASSEMBLY DIVISION DIVISION CODE TOLERANCES EXCEPT AS NOTED DO NOT SCALE DRAWING SCALE MILLIMETERS INCHES .0000 .000 .00 .00 .000 ANGLES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY NOYES This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. .13 .005 .01 HEADER, 3-WALL, .100 X .100 LATCH/EJECTOR, STRAIGHT & RA 78-5100-0771-5 G G78-5100-0771-5

3000 SERIES

CASTIGLIONE AUG 05,2014 EMSDInterconnect Solutions 2015 R. SCHERER SEP 05,2014 REVISED AND REDRAWN G 56068 AUG 05,2014 JNC RS Imaged: G.5 2/13/2015 9:46 AM UTC-06:00

QTY. 3M PART NUMBER DIM. "A" DIM. "B" DIM. "C" DIM. "D" POLARIZING NOTCHES PIN QTY. TABLE 2 3M PART NUMBER SUFFIX CONTACT TAIL DIM. "E" PIN CROSS SECTION DIM. "G" -1XX2 .062 [1.57] THICK PC BOARD .112 [2.84] DIM. "F" DIAGONALS .028+/-.001 [.71] CORNER RADII .0075 REF. [.191] .035+/-.003 [.89] SEE NOTE 5 -2XX2 -1X03 .094 [2.39] TO .125 [3.18] THICK PC BOARD -2X03 .100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE TM THREE-WALL HEADER, 3000 SERIES A A SECTION A-A B B SECTION B-B (STRAIGHT VERSION) (RIGHT ANGLE VERSION) DIM. "D" DIM. "B" .100 2.54 .100 2.54 .25 6.4 .31 7.9 .28 7.1 .020 0.51 SEE NOTE 4 .100 2.54 SEE NOTE 4 .100 2.54 .68 17.4 .12 3.0 .20 5.1 .30 7.5 .24 6.2 .30 7.5 .24 6.2 DIM. "A" DIM. "C" .020 0.51 NOTCH "A" (SEE TABLE 1 & NOTE 3) NOTCH "B" (SEE TABLE 1)POSITION 1 ORIENTATION TRIANGLE POSITION #1 .16 4.1 DIM. "E" TAIL .010 DIM. "E" TAIL .010 TYP. DIM. "F" TYP. DIM. "F" SQ. TYP. .025 .002 0.64 0.05 SQ. TYP. .025 .002 0.64 0.05 .049 1.24 .100 2.54 "Y" "Y" .15 3.8 NOTCH "C" (SEE TABLE 1 & NOTE 3) .19 4.8 12345678 8 7 6 5 4 3 2 1 A B C D D C B A OFSHT MODEL SIZE DET. LISTS CAGE NUMBER DRAWING NO. REV. TITLE 3M COPYRIGHTC 3M Center St. Paul, MN 55144 CHKD DATE APPVL DATE DRFT DATE MFG DATE CHKDDRFTREV ECO ISSUE DATE AND DESCRIPTION DRAWING NUMBER REVISION ACCESS CODES DESIGN REFERENCE NEXT ASSEMBLY DIVISION DIVISION CODE TOLERANCES EXCEPT AS NOTED DO NOT SCALE DRAWING SCALE MILLIMETERS INCHES .0000 .000 .00 .00 .000 ANGLES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY NOYES This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. .13 .005 .01 HEADER, 3-WALL, .100 X .100 LATCH/EJECTOR, STRAIGHT & RA 78-5100-0771-5 G G78-5100-0771-5 CASTIGLIONE AUG 05,2014 EMSDInterconnect Solutions 2015 R. SCHERER SEP 05,2014 REVISED AND REDRAWN G 56068 AUG 05,2014 JNC RS Imaged: G.5 2/13/2015 9:46 AM UTC-06:00

DIM. "B" DIM. "C" .232 5.91 .352 8.95 .100 .003 2.54 0.08 .100 .003 2.54 0.08 .100 .003 2.54 0.08 .100 .003 2.54 0.08 .060 1.52 .029 0.74 POSITION #1 POSITION #1 DIM. "G" AFTER PLATING TYP. DIM. "G" AFTER PLATING TYP. "Y" "Y" MIN. SIDE TO SIDE STACKABILITY .300 7.62 MAX TO EDGE OF PCB FOR DAISY CHAIN .41 10.4 2X OR .116 [2.95] (SEE NOTE 4) .106 2.69 2X OR .116 [2.95] (SEE NOTE 4) .106 2.69 RECOMMENDED MOUNTING HOLE PATTERN RECOMMENDED MOUNTING HOLE PATTERN (STRAIGHT VERSION) (RIGHT ANGLE VERSION) POLARIZING POST .321 8.15 .102 2.59 3M PART NO. MATERIAL COLOR 3201-4 LCP BLACK NOTE: INSERT POST INTO ONE MOUNTING HARDWARE HOLE ON BOTTOM OF HEADER. SET POST TO PROTRUDE .115 [2.92] 2500 & 3000 SERIES SHROUDED HEADER TOTAL NO. OF PINS NO. OF TAILS KINKED POSITIONS KINKED 10 4 3 4 7 8 14 4 3 4 11 12 16 4 3 4 13 14 20 4 3 4 17 18 26 4 3 4 23 24 34 4 7 8 27 28 40 4 7 8 33 34 50 4 7 8 43 44 60 4 11 12 49 50 64 4 11 12 53 54 KINKED TAIL DETAIL: - KINK IS LOCATED .05" BELOW BOTTOM SURFACE OF PLASTIC. - EXTERNAL RADIUS OF KINK TOWARD PART CENTERLINE. POLARIZING KEY 3M PART NO. MATERIAL COLOR DIM. "A" N3518 LCP BLACK .02 NOTE: #2216 B/A SCOTCHWELD CAN BE USED TO ADHERE KEYS. .15 3.8 .09 2.3 .34 8.5 DIM. "A" BREAKAWAY TAB PART CUSTOMIZATION THIS SPEC SHEET DETAILS OUR STANDARD OFFERING. 3M HAS SEVERAL CAPABILITIES THAT CAN PROVIDE A PART TAILORED TO YOUR SPECIFIC NEEDS. ASK YOUR 3M SALES REPRESENTATIVE OR CUSTOMER SERVICE FOR MORE DETAILS. BOTH SNAP-IN AND ROLL PIN LATCHES MAY BE ORDERED SEPARATELY. SNAP-IN AND ROLL PIN STYLE LATCHES ARE DIMENSIONALLY AND FUNCTIONALLY EQUIVALENT. IF ORDERING SNAP-IN OR ROLL PIN STYLE LATCHES SEPARATELY, PLEASE USE THE BELOW CHART. MATERIAL SHORT LATCH LONG LATCH LATCH STYLE COLOR HIGH TEMP. (PCT) N3505-2B N3505-3B ROLL PIN BLACK HIGH TEMP (PPA) N3505-30B N3505-31B SNAP-IN BLACK * SELECTIVE PIN REMOVAL (ATA OR OTHER COMPATABILITY) * WIRE WRAP TAILS STYLE TM THREE-WALL HEADER, 3000 SERIES .100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE (K2) OPTION SNAP-IN LATCHES LONG SHORT TYP. .03 0.8 NOTE: SNAP-IN LATCHES CAN ONLY BE ORDERED SEPARATELY AND ARE THE CUSTOMERS RESPONSIBILITY TO INSTALL. 12345678 8 7 6 5 4 3 2 1 A B C D D C B A OFSHT MODEL SIZE DET. LISTS CAGE NUMBER DRAWING NO. REV. TITLE 3M COPYRIGHTC 3M Center St. Paul, MN 55144 CHKD DATE APPVL DATE DRFT DATE MFG DATE CHKDDRFTREV ECO ISSUE DATE AND DESCRIPTION DRAWING NUMBER REVISION ACCESS CODES DESIGN REFERENCE NEXT ASSEMBLY DIVISION DIVISION CODE TOLERANCES EXCEPT AS NOTED DO NOT SCALE DRAWING SCALE MILLIMETERS INCHES .0000 .000 .00 .00 .000 ANGLES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY NOYES This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. .13 .005 .01 HEADER, 3-WALL, .100 X .100 LATCH/EJECTOR, STRAIGHT & RA 78-5100-0771-5 G G78-5100-0771-5 CASTIGLIONE AUG 05,2014 EMSDInterconnect Solutions 2015 R. SCHERER SEP 05,2014 REVISED AND REDRAWN G 56068 AUG 05,2014 JNC RS Imaged: G.5 2/13/2015 9:46 AM UTC-06:00

THREE-WALL HEADER, 3000 SERIES .100" X .100" LATCH/EJECTOR, STRAIGHT AND RIGHT ANGLE #2-56 NUT AND BOLT TORQUE FOR EACH BOLT: 1.25 - 3.125 INCH LBS. PANHEAD THREAD CUTTING SCREW: #4-24 X 5/16" TYPE: USA STD BT, FEDERAL BG MATERIAL: STAINLESS STEEL (INSTALL FROM BOTTOM OF BOARD) 3341-5 HEX HEAD BOLT, NUT AND WASHER: BOLT - #2-56 X 1/2" MATERIAL: STAINLESS STEEL 3341-6 .31 7.9 .50 12.7 3341-5 MOUNTING HARDWARE #4-24 TYPE BT SELF THREADING SCREW WHEN USING LATCHES, MAXIMUM LENGTH OF SCREW IS .250 INCHES PLUS THICKNESS OF THE BOARD. TORQUE FOR EACH SCREW IS 3-5 INCH LBS. 3341-6 RIGHT ANGLE VERSION INSTALL STRAIGHT VERSION INSTALL (MUST BE INSERTED PRIOR TO LATCH INSTALL) 12345678 8 7 6 5 4 3 2 1 A B C D D C B A OFSHT MODEL SIZE DET. LISTS CAGE NUMBER DRAWING NO. REV. TITLE 3M COPYRIGHTC 3M Center St. Paul, MN 55144 CHKD DATE APPVL DATE DRFT DATE MFG DATE CHKDDRFTREV ECO ISSUE DATE AND DESCRIPTION DRAWING NUMBER REVISION ACCESS CODES DESIGN REFERENCE NEXT ASSEMBLY DIVISION DIVISION CODE TOLERANCES EXCEPT AS NOTED DO NOT SCALE DRAWING SCALE MILLIMETERS INCHES .0000 .000 .00 .00 .000 ANGLES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY NOYES This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. .13 .005 .01 HEADER, 3-WALL, .100 X .100 LATCH/EJECTOR, STRAIGHT & RA 78-5100-0771-5 G G78-5100-0771-5 CASTIGLIONE AUG 05,2014 EMSDInterconnect Solutions 2015 R. SCHERER SEP 05,2014 REVISED AND REDRAWN G 56068 AUG 05,2014 JNC RS Imaged: G.5 2/13/2015 9:46 AM UTC-06:00