DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
- Power Supply Range: 2.7 to 3.6 V
- Very Low Standby Current: Typical Isb as low as 1 /C0109A
- Very Low Operating Current: As low as 3 mA
- Simple Memory Control: Single chip select (CS) Serial input (SI) and serial output (SO)
- Flexible Operating Modes: Word read and write Page mode (32 word page) Burst mode (full array)
- Organization: 32 K x 8 bit
- Self Timed Write Cycles
- Built−in Write Protection (CS High)
- HOLD Pin for Pausing Communication
- High Reliability: Unlimited write cycles
- Green SOIC and TSSOP
- These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant www.onsemi.com Device Package
ORDERING INFORMATION
N25S830HAS22I SOIC−8 (Pb−Free) Shipping†
100 Units / Tube
N25S830HAT22I TSSOP−8 (Pb−Free) N25S830HAS22IT SOIC−8 (Pb−Free) 3000 / Tape & Reel N25S830HAT22IT TSSOP−8 (Pb−Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. TSSOP−8 T SUFFIX CASE 948AL MARKING DIAGRAMS D125 XXXXYZZ XXXX = Date Code Y = Assembly Code ZZ = Lot Traceability SOIC−8 S SUFFIX CASE 751BD D115 XXXXYZZ
Table 3. ABSOLUTE MAXIMUM RATINGS should not be assumed, damage may occur and reliability may be affected. Table 4. OPERATING CHARACTERISTICS (Over Specified Temperature Range) the Recommended Operating Ranges limits may affect device reliability.
- Typical values are measured at Vcc = Vcc Typ., T A = 25°C and are not 100% tested.
Table 5. CAPACITANCE (Note 2)
- These parameters are verified in device characterization and are not 100% tested
Table 6. TIMING TEST CONDITIONS Table 7. TIMING
Table 8. CONTROL SIGNAL DESCRIPTIONS high during a program cycle, the cycle will complete and then the device will enter standby mode. SI Serial Data In I Receives instructions, addresses and data on the rising edge of SCK. SO Serial Data Out O Data is transferred out after the falling edge of SCK. must be pulled high while the SCK pin is low. Lowering the HOLD input at any time will take to SO output to High−Z. sampled on the first rising edge of SCK after CS goes low. Table 9. INSTRUCTION SET The serial SRAM READ is selected by enabling CS low. pin after the output valid time from the clock edge. looped over the 32 words of the same page. be read sequentially by continuing to provide clock pulses. the next higher address after each word of data is read out. to be continued indefinitely.
www.onsemi.com PACKAGE DIMENSIONS TSSOP8, 4.4x3 CASE 948AL−01 ISSUE O E1 E e b D cA TOP VIEW SIDE VIEW END VIEW /C01131 L Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MO-153. SYMBOL θ MIN NOM MAX A b c D E e 0º 8º L 0.05 0.80 0.19 0.09 0.50 2.90 6.30 4.30
0.65 BSC
1.00 REF
1.20 0.15 1.05 0.30 0.20 0.75 3.10 6.50 4.50 0.90 0.60 3.00 6.40 4.40
www.onsemi.com PACKAGE DIMENSIONS SOIC 8, 150 mils CASE 751BD−01 ISSUE O E1 E A h θ L c e b D PIN # 1 IDENTIFICATION TOP VIEW SIDE VIEW END VIEW Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MS-012. SYMBOL MIN NOM MAX θ A b c D E e h 0º 8º 0.10 0.33 0.19 0.25 4.80 5.80 3.80
1.27 BSC
1.75 0.25 0.51 0.25 0.50 5.00 6.20 4.00 L 0.40 1.27 1.35 ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidia ries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 N25S830HA/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative