N010-0550-T345

N010-0550-T717 FUJITSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Part Number Size Type Part Number Size Type N010-0510-T303 17.0” Pen/Finger N010-0551-T744 12.1” Pen/Finger N010-0510-T304 17.0” Pen/Finger N010-0550-T603 10.4” Pen only N010-0510-T236 15.0” Pen/Finger N010-0550-T613 10.4” Pen/Finger N010-0510-T219 15.0” Pen/Finger N010-0550-T625 10.4” Pen/Finger (light touch type) N010-0550-T717 12.1” Pen/Finger N010-0550-T627 10.4” Pen/Finger (light touch type) 100mm tail N010-0551-T742 12.1” Pen/Finger N010-0550-T345 8.4” Pen/Finger STANDARD Resistive Touch Panel Specification FID-550 7-Wire Series RoHS compliant n PART NUMBERS Touch Panels: n FEATURES

• Superior long life, using a unique construction method offering improved life over typical technologies; by sensing data input only on the glass layer, typically a 10x improvement in product life is achived.
• Excellent specification and high quality - Anti-Newton ring technology - High reliability materials
• Pen/Finger, Pen Only, Finger Only, Light Touch types available
• Transparency 80% - typical
• RoHS Compliant Input Panel Panel Drive change over switch Noise Filter MCU Control Section A/D con- verter Interface n PART NUMBERS Interface Controller Chips: N 2 N B rebmuNtraP epyT 620V-9550-010 32SR,eriW-7 7100-02114C SU,eriW-7 n PART NUMBERS Controller Boards: N 2 N B rebmuNtraP epyT 082B-8550-B61 32SR,eriW-7 047B-8550-B61 SU,eriW-7

n 1.0 APPLICATION This specification applies to the standard FID-550 series Touch Panel (Pen/Finger type). n 2.0 ADDITIONAL APPLICATIONS Complete specification document is available upon request for customers with whom we have an approved NDA in place. n 3.0 DISCRIPTION AND BLOCK DIAGRAM This panel in combination with a control IC chip is used to transfer the co-ordinates of the touched position to the host system (see block diagram above). n 4.0 DRAWING (Please see the diagram above.) Definitions of the major dimensions indicated on this diagram: Effective Input Area (A) Area guaranteed to meet all the characteristics detailed in this specification View / Transparent Area (B) The area inside the adhesive zone or electrode pattern. Anti-input Area (C) An insulating area allowed to protect the touch panel from giving false readings when an enclosure touches the panel. n 5.0 CHARACTERISTICS n 5.1 MECHANICAL Operating Force 0.05~0.49 N (5 ~ 50gF) Measured with a Silicon Measurement Rod R 8 (Round type 8mm) Silicon Rubber Hardness 60˚C Hardness of Surface Pencil hardness 3H minimum against specification JIS K-5400 n 5.2 OPTICAL Transparency 78% min measured in the effective input area to JIS K 7105 using a MURAKAMI SHIKISAI KENKYUSHO type IIR 100 meter. Typically 80%. Haze 5% measured in the effective input area using a MURAKAMI SHIKISAI KENKYUSHO type IIR 100 meter with an Anti Glare treated surface. A B C n DETAILED SPECIFICATION Force Silicon Rubber Rod Unit: mm (12.50) 93.70 123.75 (23.20) 13.50 (13.50) (12.50) (3.50) 17.20 (13.50) 162.40 215.10 213.10 (input area) 16.00 Bottom Left Top Right (8.00) 22.00 12.5±0.5 16.20 180.40 (3.50) 236.80 (24.30) (11.50) 164.40 (transparent area) (11.50) 217.10 (transparent area) 187.40 160.40 (input area) 243.80 46.20±2.0 3.50±1.0 15.20±1.0 24.30±1.0 48.80±1.0 3.50 11.50 23.20 47.00 47.0 x 3=141.00 90.5±1.0 23.20±1.0 70.20±1.0 118.20±1.0 164.20±1.0 n DIMENSION EXAMPLE (10.4” SHOWN)

n 5.3 ELECTRICAL Location Accuracy: ±2.5mm Measured over 9 points (See note 1) Linearity: 1.5% Current Consumption: 20mA max at DC 5V when applying 5VDC between pins 3 & 5 Switch Bounce (Chattering): 10ms min when using the silicon rubber measurement rod. Insulation resistance: 10MΩ minimum at 25KV DC applied between pins 3 & 7 or between 5 and 7 Dielectric Strength: 25KV DC for 1 minute Note 1: Measurement condition of linearity is corrected within the control IC. In general the location accuracy is specified as follows: Actual co-ordinate point - theoretical co-ordinate point = location accuracy. In general a 9 point co-ordinate calibration system is used to adjust the micro controller accuracy. (20 point can be used in combination with an EEPROM design). Note 2: Pins 3, 5 and 7 are the glass and film connection points. n 5.4 ENVIRONMENTAL Operating Temperature (*): -5˚C to 60˚C Storage Temperature: -30˚C to 70˚C Operating Humidity: 20% to 90% RH with a Maximum wet bulb temperature of 38˚C Storage Humidity: 10% ~ 90% RH with a Maximum wet bulb temperature of 38˚C Chemical Resistance: Coating with the following chemicals and storing at room temperature for 2 hours gives no problems. 10% NaCl-water solution, ethyl-acetate, ethyl- alcohol, toluene, methyl-ethyl-ketone. n 5.5 PEN LIFE Character Writing life: 1,000,000 words minimum Touch Input life : 10,000,000 times minimum Note 1: Words are written in the notes area and the size of the word is 7.5mm x 6.75mm. A word is any Alphabet / Number / Mark. The pen is as shown below and applies a force of 250g. A failure is judged to happen when the current consumption or insulation resistance or dielectric strength are not met as shown in 5.3. The location accuracy with 9 point calibration must be ±4.4 mm max. 9 mm 10 mm Notes Effective input area Distance Co-ordinate Point Theoretical Actual Error 3.5 Ø6.0 Ø2.0 9.0 1.0 110.0±1.0 3.0 1.5 Ø 4.6Ø2.0 R 0.8

n 5.6 FINGER LIFE A finger is simulated by a silicon rubber plunger R8 (Round type 8mm size) hardness 60˚C at 200g at frequency 5Hz. A failure is judged to happen when the current consumption or insulation resistance or dielectric strength are not met as shown in 5.3. The location accuracy with 9 point calibration must be ±4.4 mm max. Typical operating force is 150g max. n 5.7 INFORMATION ON THE PANEL The panel part number is visible from the film side The production information is visible from the glass side. Production year 99 00 etc. 1 2 3 4 5 6 7 8 9 X Y Z or 1 2 3 4 5 6 7 8 9 X Y Z January Production 2 3 4 5 6 7 8 9 X Y Z or 2 3 4 5 6 7 8 9 X Y Z February Production December Production n 6 PACKAGING n 6.1 PACKING SPECIFICATION Vibration: 10~55 Hz at 1 Octave per minute 10G 20 cycles with one side 0.75mm Drop test: 60cm Drop 1 corner, 3 crease lines and 6 faces. 1 each 1 time After the test no glass: flaw or crack is seen, and no dent or scratch on the film. Also glass and film must not separate. Z or 1 2 3 4 5 6 7 8 9 Y Z n 6.1 PACKING DETAILS Each touch panel is placed into a plastic bag and is held in place by a slit cut into the side of the card- board. A second insertion piece is placed into the carton to again add stability. The qty is written on the side of the box. For example the T611 has 26 pieces per box. Insert Touch panel with bag Slit in cardboard

n 7.0 REJECT CRITERIA noitpircseD airetirCtcejeR tneDmliF mm1.0a ≥erA 2 mm50.0a ≥erA 2 mm1.0<aera& 2 mm50.0<aerA 2 orezebot: stniop5.xamebot: deificepsenon: ngieroF lairetam neewteb mlifdnassalg epyttoD mm1.0>aerA 2 mm50.0a ≥erA 2 mm1.0<aera& 2 mm50.0<aerA 2 orezebot: stniop5.xamebot: deificepsenon: epyteniL mm1.0a >erA mm01<htgneldnamm1.0<htdiw&mm30.0a ≥erA mm50.0<aerA orezebot: tniop1.xamebot: deificepsenon: hctarcS mm1.0a ≥erA mm08<htgnelhtiwmm1.0<htdiw&mm30.0a ≥erA mm03<htgnelhtiwmm1.0<htdiw&mm30.0<aerA orezebot: tniop1.xamebot: deificepsenon: taocdrahrorulbtoD gnissim mm5.0a ≥erA 2 mm30.0a ≥erA 2 mm5.0<aera& 2 mm50.0<aerA 2 orezebot: stniop5.xamebot: deificepsenon: gniRnotweN 3(pmaltnecseroulfarednuedismliflenaPmorfneesebtontsumesehT .edisssalgmrofdeifirevebottoN.)pmalepythtgnelevaw walfssalG ehT.margaidgniwollofehtninwohstahtnahtreggibsihcihwwalfoneboT .deificepstonsiswalfforebmun n 8.0 GENERAL POINTS OF CAUTION Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solu- tion. Watch the edge of the panel when cleaning, again for safety reasons. 2mm 2mm 5mm 3mm

n 9.0 CONNECTION AND MOUNTING The details below indicate the recommended mounting structure for panel and enclosure. The enclosure sup- port to fix the touch panel must be over 1.0mm I width and must be outside the view (Transparent area). Also ensure that the enclosure does not cause miss input by touching the view area. The following diagram shows that the enclosure edge must be between the View area and the guaranteed ac- tive area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel and enclosure is elastic. Special design would be required to stop water ingress. The corners of the touch panel are conductive so do not touch any metal parts after mounting. Location Detect 1. Right/ Upper Glass 2. Right/ Upper Glass 3. Each side Glass 4. Left/ Lower Glass 5. Each side Glass 6. Left/ Lower Glass 7. All Film Bottom View (Drawing, with conductive side up) (Mating connector type FCI or equivalent SFW15R-1STAE1-LF: for FPC) 0.8 mm min. Connector LCD 1.0 to 3.0 mm Circuit Board Transparent Area Anti-input Area Shock absorber to protect the panel (eg rubber) Upper Case Input Area Shock absorber for protection View Area Input Panel Wiring Area Cut-out / avoidance of 550 surface mount diodes Conductive Face FPC-type cable Contact Section View Laminate Film Stiffener Board 0.3±0.05 2.0 1.1 1.2 0.7 3.35 2.0 Top View (Picture, with conductive side down)

n 10.0 PANEL THICKNESS

2.6 Max

1.4 Thickness of glass 1.1mm Stiffener Board Conductive Face Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141 8630, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25

2132 WV Hoofddorp

Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ Fujitsu Components International Headquarter Offices ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. May 30, 2007.