MTTBS MMD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Specifications subject to change without notice Revision 02/14/07 C MTTBS Series – 5 x 3.2 Ceramic SMD VCTCXO ¾ Low Profile SMD Device ¾ Hermetically Sealed ¾ Tight Stability Over Temperature ¾ Low Power Consumption ELECTRICAL SPECIFICATIONS: Frequency Range 10.000MHZ to 32.000MHZ Frequency Stability vs Temperature* (See Fr equency Stability vs Temperature Table) Operating Temperature Range (See Freque ncy Stability vs Temperature Table) Storage Temperature Range -40°C to +85°C Supply Voltage (±10%) +2.80VDC +3.00VDC Supply Current 1.5mA max Output Type Clipped Sinewave Output Level 0.9 – 1.4 Vp-p Load 10k Ohms // 10pF Harmonics -10dBc max Control Voltage Vc = +1.40VDC +0.40VDC to +2.40VDC Vc = +1.5VDC +0.50VDC to +2.50VDC Frequency Tunning Range ±3 ppm to ±25 ppm Phase Noise -135dBc/Hz max (at 1kHz offset) Start-up Time 2ms max (Output level will be 90% from the final value) * Inclusive of Temperature., Load, Voltage and Aging PART NUMBER GUIDE: Frequency 5 x 3.2 Ceramic SMD Please Consult with MMD Sales Department for any other Parameters or Options S Output S = Clipped Sinewave Supply Voltage 2 = +2.8 VDC 3 = +3.0 VDC Frequency Stability 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm Operating Temperature A = 0°C to + 50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Pin 1 Connection Blank = No Connection G = Ground V = Voltage Control Packaging Blank = Bulk T = Tape and Reel MTTB MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com
Specifications subject to change without notice Revision 02/14/07 C FREQUENCY STABILITY vs TEMPERATURE TABLE: F -40°C TO +85°C
- = Available = Consult with the Manufacturer MECHANICAL DIMENSIONS: 5.20 [.205] MAX OUTPUTPIN 3 1.20 [.047] 0.90 [.035] 3.40 [.134] MAX LAND PATTERN RECOMMENDED EXTERNAL BYPASS CAPACITOR RECOMMEND DIMENSIONS IN BRACKETS ARE IN INCHES
21 SUPPLY VOLTAGEPIN 4
3.90 [.154] CASE GROUNDPIN 2 PIN 1 VOLTAGE CONTROL PIN CONNECTIONS ENVIRONMENT / MECHANICAL: Shock MIL-STD-883, Method 2002, Condition B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-883, Method 215 Vibration MIL-STD-883, Method 2007, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Fine Leak Test MIL-STD-883, Method 1014, Condition A-2 TAPE and DIMENSIONS: PHASE NOISE: 100.00 [3.937] 330.00 [12.992] 12.40 [.488] 18.40 [.724] 13.00 [.512] 21.00 [.827] 2.00 [.079] 5.50 [.217] 12.00 [.472] 2.00 [.079] 5.50 [.217] 1.75 [.069] 8.00 [.315] MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com