MTTAS MMD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MTTAS Series – 5 x 3.2 Ceramic SMD VCTCXO ¾ Low Profile SMD Device ¾ Hermetically Sealed ¾ Tight Stability Over Temperature ¾ Low Power Consumption ELECTRICAL SPECIFICATIONS: Frequency Range 10.000MHZ to 44.545MHZ Frequency Stability vs Temperature * (See Frequency Stability vs Temperature Table) Operating Temperature Range (See Frequency Stability vs Temperature Table) Storage Temperature Range -40°C to +85°C Supply Voltage +2.50VDC +3.30VDC +5.00VDC Supply Current 2mA max Output Type Clipped Sinewave Output Level 0.8 Vp-p min Output Load 10k Ohms // 10pF Control Voltage 1.5VDC ±1.0VDC Frequency Tunning Range ±8.0ppm * Inclusive of Temperature., Load, Voltage and Aging PART NUMBER GUIDE: FrequencyMTTA 5 x 3.2 Ceramic SMD S Frequency Stability 50 = ±5.0 ppm 30 = ±3.0 ppm 25 = ±2.5 ppm 20 = ±2.0 ppm 15 = ±1.5 ppm 10 = ±1.0 ppm Please Consult with MMD Sales Department for any other Parameters or Options 5 = +5.0 VDC 3 = +3.3 VDC 2 = +2.5 VDC Supply Voltage S = Clipped Sinewave Output Operating Temperature A = 0°C to + 50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Pin 1 Connection Blank = No Connection G = Ground V = Voltage Control Packaging Blank = Bulk T = Tape and Reel MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTTAS08/14/07E
FREQUENCY STABILITY vs TEMPERATURE TABLE:
- = Available = Consult with the Manufacturer MECHANICAL DIMENSIONS: OUTPUTPIN 3 LAND PATTER N RECOMMENDED EXTERNAL BYPASS CAPACI TOR RECOMMEND DIMENSIONS IN BRACKETS ARE IN INCHES SUPPLY VOLTAGEPIN 4 VOLTAGE CONTROL GROUND, NC, OR CASE GROUNDPIN 2 PIN 1 PIN CONNECTIONS 5.20 [.205] MAX 3.40 [.134] MAX 1.70 [.067] MAX 1.27 [.050] 1.50 [.059] 0.90 [.035] THESE 4 PADS ARE NOT TO BE CONNECTED TO ANY EXTERNAL SOURCES. ENVIRONMENT / MECHANICAL: MARKING DETAIL: Shock MIL-STD-883, Method 2002, Condition B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-883, Method 215 Vibration MIL-STD-883, Method 2007, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Fine Leak Test MIL-STD-883, Method 1014, Condition A-2 Line 1 = MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 TAPE and DIMENSIONS: PHASE NOISE: 100.00 [3.937] 330.00 [12.992] 12.40 [.488] 18.40 [.724] 13.00 [.512] 21.00 [.827] 2.00 [.079] 5.50 [.217] 12.00 [.472] 2.00 [.079] 5.50 [.217] 1.75 [.069] 8.00 [.315] MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTTAS08/14/07E