MTSS MMD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Specifications subject to change without notice Revision MTSS030508I MTSS Series – 3.2 X 2.5 Ceramic SMD VCTCXO ¾ Low Profile SMD Device ¾ Hermetically Sealed ¾ Tight Stability Over Temperature ¾ Excellent Phase Noise ELECTRICAL SPECIFICATIONS: Frequency Range 14.400MHZ TO 32.734MHZ Frequency Stability vs Temperature* (See Fr equency Stability vs Temperature Table) Operating Temperature Range (See Freque ncy Stability vs Temperature Table) Storage Temperature Range -40°C to +85°C Aging ±1.0 per year Supply Voltage +2.80VDC +3.00VDC Supply Current 2mA max Output Type Clipped Sinewave Output Level 0.8 Vp-p min Output Load 10k Ohms//10pF Control Voltage Vc = +1.40VDC +0.40VDC to +2.40VDC Vc = +1.5VDC +0.50VDC to +2.50VDC Frequency Tunning Range ±8 ppm to ±15 ppm Phase Noise 100Hz -115dBc/Hz 1kHz -135dBc/Hz 10kHz -145dBc/Hz * Inclusive of Temperature., Load, Voltage and Aging PART NUMBER GUIDE: 10 = ±1.0 ppm 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm Frequency Stability A = 0°C to +50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Operating Temperature Blank = Ground* V = Voltage Control Pin 1 Connection Packaging Blank = Bulk T = Tape and Reel 3 = +3.0 VDC 2 = +2.8 VDC Supply Voltage S = Clipped Sinewave Output 3.2 x 2.5 Ceramic SMD FrequencyMTS S Please Consult with MMD Sales Department for any other Parameters or Options *If no Voltage Control is specified, Pin 1 must be grounded. MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com
Specifications subject to change without notice Revision MTSS030508I FREQUENCY STABILITY vs TEMPERATURE TABLE: A 0°C TO +50°C ● ● ● G 0°C TO +70°C ● ● ● F -40°C TO +85°C
- = Available = Consult with the Manufacturer MECHANICAL DIMENSIONS: External Bypass Capacitor is Recommended Dimension in Brackets are in Inches 0.83 [.033] 2.70 [.106] MAXMARKING 3.40 [.134] MAX 0.90 [.035] MAX 0.70 [.028] 0.25 [.010] 0.51 [.020] NOTE 1 IF VC OPTION IS NOT USED, THIS PIN MUST BE GROUNDED OR FREQUENCY WILL SHIFT.1.20 [.047] GROUND PLANE UNDER OSCILLATOR 0.40 [.016] 2 1 0.30 [.012] 0.60 [.024] Recommended Land Pattern PIN 1 PIN 2 PIN 3 PIN 4 2.24 [.088] 3 4 2.65 [.104] GRD OR VC (NOTE 1) SUPPLY VOLTAGE PIN CONNECTIONS GND OUTPUT ENVIRONMENT / MECHANICAL: Shock MIL-STD-883, Method 2002, Condition B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-883, Method 215 Vibration MIL-STD-883, Method 2007, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Fine Leak Test MIL-STD-883, Method 1014, Condition A-2 TAPE and DIMENSIONS: PHASE NOISE: TAPE AND REEL DIMENSIONS COMING SOON MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com