MTSM0302AZ-HR-A MARKTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
3Northway Lane North Latham,New York 12110. Tollfree:1.800.984.5337 Phone:1.518.956.2980 Fax:1.518.785.4725 Http://www.marktechopto.com SPECIFICATION P ART NO. : MTSM0302AZ-HR-A 1.8mm AXIAL LED LAMP
MTSM0302AZ-HR-A 1.8mm AXIAL LED LAMP VER.: 01 Date : 2007/10/04 Page: 1/6 Package Dimensions 2.0 0.4 2.5 0.5 1.8 AK R0.83 0.15 3.05 4.3 5.8 2.8 1.5 0.875 1.925 1.4 Notes: 1. All dimensions are in mm. 2. Tolerance is ±0.25mm unless otherwise noted.
Description
Part No. Material Emitting Color Lens Color MTSM0302AZ-HR-A AlGaInP/GaAs Deep Red Water Clear
MTSM0302AZ-HR-A 1.8mm AXIAL LED LAMP VER.: 01 Date : 2007/10/04 Page: 2/6 Absolute Maximum Ratings at Ta=25Ċ Parameter Symbol Rating Unit Power Dissipation P D 72 mW Reverse V oltage V R 5 V D.C. Forward Current If 30 mA Peak Current(1/10Duty Cycle,0.1ms Pulse Width.) If(Peak) 100 mA Operating Temperature Range Topr. -40 to +100 Ċ Storage Temperature Range Tstg. -40 to +100 Ċ Soldering Temperature Tsld. Reflow Soldering: 260ĊGPSTFD E l e c t r i c a l a n d O p t i c a l C h a r a c t e r i s t i c s : Parameter Symbol Condition Min. Typ. Max. Unit Luminous Intensity I V If=20mA 622 1050 mcd Forward V oltage Vf If=20mA 1.9 2.4 V Peak Wavelength λp If=20mA 650 nm Dominant Wavelength λd If=20mA 639 nm Reverse Current Ir Vr=5V 100 µA Viewing Angle 2ǀ1/2 If=20mA 36 deg Spectrum Line Halfwidth ∆λ If=20mA 20 nm N o t e s : 1 . T h e d a t a s t e s t e d b y I S t e s t e r . 2. Customer’s special requirements are also welcome.
MTSM0302AZ-HR-A 1.8mm AXIAL LED LAMP VER.: 01 Date : 2007/10/04 Page: 3/6 Typical Electrical/Optical Characteristic Curves (25Ċ Ambient Temperature Unless Otherwise Noted) Applied Voltage (V) Forward Current IF(mA) 20.0 Forward Current (mA) Relative Luminous Intensity(mcd0 10.00 300 600 1200 900 1500 30.00.0 Forward Current VS. Applied V oltage Forward Current VS. Luminous Intensity Ambient Temperature Ta ( )Ċ 0 2 04 06 0 1 0 0 80 Forward Current IF(mA)10 30° 40° 50° 70° 60° 90° 80° 0.4 0.60.10.3 0.8 0.7 0.5 0.9 1.0 0.2 10°0° 20° Ambient Temperature VS. Forward Current Radiation Diagram
MTSM0302AZ-HR-A 1.8mm AXIAL LED LAMP VER.: 01 Date : 2007/10/04 Page: 4/6 PRECAUTION IN USE Storage Recommended storage environment Temperature: 5 oC ~ 30oC (41oF ~ 86oF) Humidity: 60% RH Max. Use within 7 days after opening of sealed vapor/ESD barrier bags. If the moisture absorbent material (silica ge l) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60Ô5Ċ for 24 hours. Fold the opened bag firmly and keep in dry environment. Soldering Reflow Soldering Lead Solder Lead – free Solder Pre-heat 120~150Ċ 180~200 Ċ Pre-heat time 120sec. Max. 120sec. Max. Peak temperature 240Ċ Max. 260 Ċ Max. Soldering time 10sec. Max. 10sec. Max. Condition refer to refer to Temperature- Temperature- profile 1 profile 2 *After reflow soldering rapid cooling should be avoided. [Temperature-profile (Surface of circuit board)] Use the conditions shown to the under figure. Ö1 : Lead Solder× Ö2 : Lead-free Solder× 120sec. Max. 60sec. Max. Pre-heating 120~150°C 2.5~5°C/sec. 2.5~5°C/sec. 240°C Max. 10sec. Max. 120sec. Max. 60sec. Max. Pre-heating 180~200°C 1~5°C/sec. 260°C Max. 10sec. Max. 1~5°C/sec.
MTSM0302AZ-HR-A 1.8mm AXIAL LED LAMP VER.: 01 Date : 2007/10/04 Page: 5/6 Dimensions for Tape 4.0 4.02.0 0.15 12.0 3.05 2.161.65 11 ° MAX 5° MAX 1.55 0.3 5.5 1.75 Dimensions for Reel 13.2±0.5 16.2±0.5 178.0±1 60.0±0.5 Notes: 1.All dimensions are in mm, tolerance is±2.0mm unless otherwise noted. 2.Specifications are subject to change without notice.
MTSM0302AZ-HR-A 1.8mm AXIAL LED LAMP VER.: 01 Date : 2007/10/04 Page: 6/6 Packing REEL QUANTITY: 1,500 PCS BAG QUANTITY: 1,500 PCS INSIDE BOX QUANTITY: 4 BAGS TOTAL: 6,000 PCS ઽ ช ҿ 料 M OISTURE SENSITIVE DEVICES 4IFMGMJGFJOTFBMFECBHNPOUIT BUĘ$_Ę$ %FWJDFTIBWFUPCFNPVOUFEXJUIJO IPVSTBGUFSUIJTCBHJTPQFOFE 270±1.0 230±1.0 75±2 275±2 235±2 PART NO :MTXXXX-XX Q'TY : PCS LOT NO :XXXXXXXXX DATE : BIN CODE: Marktech Optoelectronics. 178±1 PART NO :MTXXXX-XX Q'TY : PCS LOT NO :XXXXXXXXX DATE : BIN CODE: Marktech Optoelectronics. PART NO :M TXXXX-XX Q'TY : PCS LOT NO :XXXXXXXXX DATE : BIN CODE: M arktech Optoelectronics. PART NO :MTXXXX-XX Q'TY : PCS LOT NO :XXXXXXXXX DATE : BIN CODE: Marktech Optoelectronics. PART NO :MTXXXX-XX Q'TY : PCS LOT NO :XXXXXXXXX DATE : BIN CODE: Marktech Optoelectronics. ๛ंઽชҿ料 MOISTURE SENSITIVE DEVICES 1. ί5ĘC~30ĘC൧ᔛd1年f Shelf life in sealed bag : 12 months at 5°C~30°C . 2. ცί168ʫԴ͜f Devices have to be mounted within 168 hours after this bag is opened . Notes: 1. All dimensions are in mm, tolerance is±2.0mm unless otherwise noted. 2. Specifications are subject to change without notice.