MTR10-100-000-M14-10A E-T-A | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
www.e-t-a.de MTR10 – mechanical relay (timer relay) 2224
Description
Technical data (25 °C) MTR10 The MTR10 timer relay combines a well-proven mechanical contact system with the flexibility of an electronic timing element. As a replacement of a standard automotive relay, the MTR10 adds probably missing ON or OFF delay. The MTR10 timer relay is suitable for standard automotive relay sockets according to ISO 7588 (ISO Mini).
Applications
The MTR10 timer relay is available for DC 12 V and DC 24 V applications. Typical applications: l Passenger cars l Trucks l Buses l Construction vehicles and emergency cars Application examples: l Control of pumps, valves, lights or motors that are intended to stay open or overtravel for a certain time l Co-ordinated, sequential switch-on of loads to avoid load peaks (e.g. with fans). l The MTR10 timer relay is reverse polarity protected by its design and is supplied with only roughly pre-set time settings. This saves time and avoids errors in production. l The MTR10 provides a vehicle very simply with and ON or OFF delay without modification of the controlgear software. It is sufficient to replace a standard relay with the MTR10 in the power distribution board. Qualifications Degree of protection IP50 Noise immunity 2006/28 EC DIN40839 E1 number upon request Rated voltage 12 V 24 V Quiescent current < 10 mA Tolerance 5 % Time range Selection per
ordering information
Response time < 100 ms Switching time ON Switching time OFF typically 10 ms typically 5 ms Operating temperature -40 °C...-85 °C Typical life at rated current 10^5 electrically Mass 30 g Dimensions (LxWxH) 30 mm x 30 mm x 40 mm Materials Blade terminals A6.3 x 0.8 DIN 46 244 CuZn 37 F37 Housing material PA6GF Output change-over contact Continuous current 12 V: 10 A
30 A upon
24 V: 10 A
MTR10 – mechanical relay (timer relay) www.e-t-a.de MTR10 – mechanical relay (timer relay) 2224 Dimensions Schematic diagram / pin assignment / negative control input Schematic diagram / pin assignment / positive control input Type A 5 pins Type B 6 pins + UB - UB 87a + UB - UB 87z 87a Type C 5 pins Type D 5 pins + UB - UB 87a + UB - UB 87a Type A 5 pins Type B 6 pins Type C 5 pins Type D 5 pins + UB - UB 87a + UB - UB 87z 87a + UB - UB 87a + UB - UB 87a 51.6 20.3
5 PIN
11.8 15.7 11.8 Type A, C, D 1531 87a
6 PIN40
15.7 11.8 11.8 51.6 20.3 Typ B 87z30 1531 87a
www.e-t-a.de MTR10 – mechanical relay (timer relay) 2224 MTR10 – mechanical relay (timer relay) Status chart / actuation level positive Status chart / actuation level negative Type A 5 pins Type B 6 pins + UB - UB 87a + UB - UB 87z 87a Type C 5 pins Type D 5 pins + UB - UB 87a + UB - UB 87a Type A 5 pins Type B 6 pins + UB - UB 87a + UB - UB 87z 87a Type C 5 pins Type D 5 pins + UB - UB 87a + UB - UB 87a Type A 5 pins Type B 6 pins Type C 5 pins Type D 5 pins + UB - UB 87a + UB - UB 87z 87a + UB - UB 87a + UB - UB 87a Type A 5 pins Type B 6 pins Type C 5 pins Type D 5 pins + UB - UB 87a + UB - UB 87z 87a + UB - UB 87a + UB - UB 87a Type A 5 pins Type B 6 pins Type C 5 pins Type D 5 pins + UB - UB 87a + UB - UB 87z 87a + UB - UB 87a + UB - UB 87a Type A 5 pins Type B 6 pins Type C 5 pins Type D 5 pins + UB - UB 87a + UB - UB 87z 87a + UB - UB 87a + UB - UB 87a
www.e-t-a.de MTR10 – mechanical relay (timer relay) 2224 All information and data given on our products are accurate and reliable to the best of our knowledge, but E-T-A does not accept any responsibility for the use in applications which are not in accordance with the present specification. E-T-A reserves the right to change specifications at any time in the interest of improved design, performance and cost effectiveness. Dimensions are subject to change without notice. Please enquire for the latest dimensional drawing with tolerances if required. All dimensions, data, pictures and descriptions are for information only and are not binding. Amendments, errors and omissions excepted. Ordering codes of the products may differ from their marking MTR10 Mechanical timer relay Operating voltage 1 12 V 2 24 V Function / control input
1 ON delay / type A
2 ON delay / type B
3 ON delay / type C
4 ON delay / type D
6 OFF delay / type A
7 OFF delay / type B
9 OFF delay / type D
H hours (max. 12) Time value 01 1 02 2 03 3 04 4 05 5 06 6 07 7 08 8 09 9 10 10 11 11 ... to 99 99 Current ratings 10 A
30 A (upon request, not in stock)
MTR10 - 1 0 0 - 0 0 0 - M 14 - 10 A ordering example