MTP3055VL

MTP3055VL ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

© Semiconductor Components Industries, LLC, 2006 August, 2006 − Rev. 4

1 Publication Order Number:

12 Amps, 60 Volts, Logic

N−Channel TO−220 This Power MOSFET is designed to withstand high energy in the avalanche and commutation modes. Designed for low voltage, high speed switching applications in power supplies, converters and power motor controls, these devices are particularly well suited for bridge circuits where diode speed and commutating safe operating areas are critical and offer additional safety margin against unexpected voltage transients.

• Avalanche Energy Specified
• IDSS and VDS(on) Specified at Elevated Temperature MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Rating Symbol Value Unit Drain−Source Voltage VDSS 60 Vdc Drain−Gate Voltage (RGS = 1.0 MΩ) VDGR 60 Vdc Gate−Source Voltage − Continuous − Single Pulse (tp ≤ 50 μs) VGS VGSM ±15 ± 20 Vdc Vpk Drain Current − Continuous @ 25°C Drain Current − Continuous @ 100°C Drain Current − Single Pulse (tp ≤ 10 μs) ID ID IDM 8.0 Adc Apk Total Power Dissipation @ 25°C Derate above 25°C PD 48 0.32 Watts W/°C Operating and Storage Temperature Range TJ, Tstg −55 to 175 Single Pulse Drain−to−Source Avalanche Energy − Starting TJ = 25°C (VDD = 25 Vdc, VGS = 5.0 Vdc, IL = 12 Apk, L = 1.0 mH, RG =25 Ω) EAS 72 mJ Thermal Resistance − Junction to Case − Junction to Ambient RθJC RθJA 3.13 62.5 °C/W Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 10 seconds TL 260 °C

12 AMPERES

60 VOLTS

RDS(on) = 180 mΩ Preferred devices are recommended choices for future use and best overall value. Device Package Shipping

ORDERING INFORMATION

MTP3055VL TO −220AB 50 Units/Rail TO−220AB CASE 221A STYLE 5 http://onsemi.com N−Channel D S G MARKING DIAGRAM & PIN ASSIGNMENT MTP3055VL = Device Code LL = Location Code Y = Year WW = Work Week MTP3055VL LLYWW Gate Source Drain Drain

http://onsemi.com ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Drain−Source Breakdown Voltage (VGS = 0 Vdc, ID = 250 μAdc) Temperature Coefficient (Positive) V(BR)DSS Vdc mV/°C Zero Gate Voltage Drain Current (VDS = 60 Vdc, VGS = 0 Vdc) (VDS = 60 Vdc, VGS = 0 Vdc, TJ = 150°C) IDSS 100 μAdc Gate−Body Leakage Current (VGS = ±15 Vdc, VDS = 0) IGSS − − 100 nAdc ON CHARACTERISTICS (Note 1) Gate Threshold Voltage (VDS = VGS, ID = 250 μAdc) Temperature Coefficient (Negative) VGS(th) 1.0 1.6 3.0 2.0 Vdc mV/°C Static Drain−Source On−Resistance (VGS = 5.0 Vdc, ID = 6.0 Adc) RDS(on) − 0.12 0.18 Ohm Drain−Source On−Voltage (VGS = 5.0 Vdc) (ID = 12 Adc) (ID = 6.0 Adc, TJ = 150°C) VDS(on) 1.6 2.6 2.5 Vdc Forward Transconductance (VDS = 8.0 Vdc, ID = 6.0 Adc) gFS 5.0 8.8 − mhos DYNAMIC CHARACTERISTICS Input Capacitance (VDS = 25 Vdc, VGS = 0 Vdc, f = 1.0 MHz) Ciss − 410 570 pF Output Capacitance Coss − 114 160 Reverse Transfer Capacitance Crss − 21 40 SWITCHING CHARACTERISTICS (Note 2) Turn−On Delay Time (VDD = 30 Vdc, ID = 12 Adc, VGS = 5.0 Vdc, RG = 9.1 Ω) td(on) − 9.0 20 ns Rise Time tr − 85 190 Turn−Off Delay Time td(off) − 14 30 Fall Time tf − 43 90 Gate Charge (See Figure 8) (VDS = 48 Vdc, ID = 12 Adc, VGS = 5.0 Vdc) QT − 8.1 10 nC Q1 − 1.8 − Q2 − 4.2 − Q3 − 3.8 − SOURCE−DRAIN DIODE CHARACTERISTICS Forward On−Voltage (Note 1) (IS = 12 Adc, VGS = 0 Vdc) (IS = 12 Adc, VGS = 0 Vdc, TJ = 150°C) VSD 0.97 0.86 1.3 Vdc Reverse Recovery Time (See Figure 14) (IS = 12 Adc, VGS = 0 Vdc, dIS/dt = 100 A/μs) trr − 55.7 − ns ta − 37 − tb − 18.7 − Reverse Recovery Stored Charge QRR − 0.116 − μC INTERNAL PACKAGE INDUCTANCE Internal Drain Inductance (Measured from contact screw on tab to center of die) (Measured from the drain lead 0.25″ from package to center of die) LD − 3.5 4.5 nH Internal Source Inductance (Measured from the source lead 0.25″ from package to source bond pad) LS − 7.5 − nH 1. Pulse Test: Pulse Width ≤300 μs, Duty Cycle ≤ 2%. 2. Switching characteristics are independent of operating junction temperature.

be charged by current from the generator. and Q2 and VGSP are read from the gate charge curve. on−state when calculating td(off). is difficult to measure and, consequently, is not specified. maintain a value of unity regardless of the switching speed. however, snubbing reduces switching losses. Figure 7. Capacitance Variation

5 VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)

Figure 8. Gate−To−Source and Drain−To−Source Figure 9. Resistive Switching Time Figure 10. Diode Forward Voltage versus Current assumed to equal the values indicated.

http://onsemi.com PACKAGE DIMENSIONS TO−220 THREE−LEAD TO−220AB CASE 221A−09 ISSUE AA STYLE 5: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 12 3 D SEATING PLANE−T− C ST U R J ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 MTP3055VL/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative