MTE53N50E MOTOROLA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

1Motorola TMOS Power MOSFET Transistor Device Data /C0068/C0101/C0115/C0105/C0103/C0110/C0101/C0114/C0039/C0115 /C0068/C0097/C0116/C0097 /C0083/C0104/C0101/C0101/C0116 /C0073/C0083/C0079/C0084/C0079/C0080 /C0084/C0077/C0079/C0083 /C0069/C0045/C0070/C0069/C0084/C0046 /C0080/C0111/C0119/C0101/C0114 /C0070/C0105/C0101/C0108/C0100 /C0069/C0102/C0102/C0101/C0099/C0116 /C0084/C0114/C0097/C0110/C0115/C0105/C0115/C0116/C0111/C0114 N–Channel Enhancement–Mode Silicon Gate This advanced high voltage TMOS E–FET is designed to withstand high energy in the avalanche mode and switch efficiently. This new high energy device also offers a drain–to–source diode with fast recovery time. Designed for high voltage, high speed switching applications such as power supplies, PWM motor controls and other inductive loads, the avalanche energy capability is specified to eliminate the guesswork in designs where inductive loads are switched and offer additional safety margin against unexpected voltage transients.

  • 2500 V RMS Isolated Isotop Package
  • Avalanche Energy Specified
  • Source–to–Drain Diode Recovery Time Comparable to a Discrete Fast Recovery Diode
  • Diode is Characterized for Use in Bridge Circuits
  • Very Low Internal Parasitic Inductance
  • IDSS and VDS(on) Specified at Elevated Temperature
  • U. L. Recognized, File #E69369 MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Rating Symbol Value Unit Drain–Source Voltage VDSS 500 Vdc Drain–Gate Voltage (RGS = 1.0 MΩ ) VDGR 500 Vdc Gate–Source Voltage — Continuous Gate–Source Voltage — Non–Repetitive (tp ≤ 10 ms) VGS VGSM ± 20 ± 40 Vdc Vpk Drain Current — Continuous Drain Current — Continuous @ 100°C Drain Current — Single Pulse (tp ≤ 10 µs) ID ID IDM 210 Adc Total Power Dissipation Derate above 25°C PD 460 3.70 Watts W/°C Operating and Storage Temperature Range TJ, Tstg –40 to 150 °C Single Pulse Drain–to–Source Avalanche Energy (VDD = 25 Vdc, VGS = 10 Vdc, IL= 53 Apk, L = 0.29 mH, RG =25Ω ) EAS 400 mJ RMS Isolation Voltage VISO 2500 Vac Thermal Resistance — Junction to Case Thermal Resistance — Junction to Ambient R θJC R θJA 0.28 62.5 °C/W Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 10 seconds TL 260 °C Designer’s Data for “Worst Case” Conditions— The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit curves — representing boundaries on device characteristics — are given to facilitate “worst case” design. E–FET is a trademark of Motorola, Inc. TMOS is a registered trademark of Motorola, Inc. ISOTOP is a trademark of SGS–THOMSON Microelectronics. Preferred devices are Motorola recommended choices for future use and best overall value. REV 2 Order this document by MTE53N50E/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0077/C0084/C0069/C0053/C0051/C0078/C0053/C0048/C0069 TMOS POWER FET

53 AMPERES

500 VOLTS

R DS(on) = 0.080 OHM Motorola Preferred Device D S G SOT–227B 1. Source 2. Gate 3. Drain 4. Source 2  Motorola, Inc. 1996

/C0077/C0084/C0069/C0053/C0051/C0078/C0053/C0048/C0069

2 Motorola TMOS Power MOSFET Transistor Device Data

ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Drain–Source Breakdown Voltage (VGS = 0 Vdc, ID = 250 µAdc) Temperature Coefficient (Positive) V(BR)DSS 500 560 550 Vdc mV/°C Zero Gate Voltage Drain Current (VDS = 500 Vdc, VGS = 0 Vdc) (VDS = 500 Vdc, VGS = 0 Vdc, TJ = 125°C) IDSS 100 µAdc Gate–Body Leakage Current (VGS = ± 20 Vdc, VDS = 0) IGSS — — 200 nAdc ON CHARACTERISTICS (1) Gate Threshold Voltage (VDS = VGS , ID = 250 µAdc) Threshold Temperature Coefficient (Negative) VGS(th) 2.0 3.2 4.0 Vdc mV/°C Static Drain–Source On–Resistance (VGS = 10 Vdc, ID = 26.5 Adc) R DS(on) — 63 80 mOhm Drain–Source On–Voltage (VGS = Vdc) (ID = 53 Adc) (ID = 26.5 Adc, TJ = 125°C) VDS(on) 4.8 4.3 Vdc Forward Transconductance (VDS = 15 Vdc, ID = 26.5 Adc) gFS 25 45 — mhos DYNAMIC CHARACTERISTICS Input Capacitance (V 25 Vdc V 0 Vdc C iss — 14400 — pF Output Capacitance (VDS = 25 Vdc, VGS = 0 Vdc, f = 1.0 MHz) C oss — 1560 — Reverse Transfer Capacitance f = 1.0 MHz) C rss — 240 — SWITCHING CHARACTERISTICS (2) Turn–On Delay Time (V 250 Vd I 53 Ad td(on) — 67 — ns Rise Time (VDD = 250 Vdc, ID = 53 Adc, VGS =1 0V d c tr — 322 — Turn–Off Delay Time VGS = 10 Vdc, R G = 4.7 Ω ) td(off) — 362 — Fall Time G ) tf — 310 — Gate Charge (V 400 Vd I 53 Ad Q T — 474 700 nC (VDS = 400 Vdc, ID = 53 Adc, Q 1 — 86 —( DS , D , VGS = 10 Vdc) Q 2 — 206 — Q 3 — 148 — SOURCE–DRAIN DIODE CHARACTERISTICS Forward On–Voltage (1) (IS = 53 Adc, VGS = 0 Vdc) (IS = 53 Adc, VGS = 0 Vdc, TJ = 125°C) VSD 0.95 0.90 1.3 Vdc Reverse Recovery Time (I 53 Ad V 0 Vd trr — 720 — ns (IS = 53 Adc, VGS = 0 Vdc, ta — 460 —(S , GS , dIS/dt = 100 A/µs) tb — 260 — Reverse Recovery Stored Charge Q RR — 15 — µC INTERNAL PACKAGE INDUCTANCE Internal Drain Inductance (Measured from contact screw on tab to center of die) (Measured from the drain lead 0.25″ from package to center of die) LD 3.5 5.0 nH Internal Source Inductance (Measured from the source lead 0.25″ from package to center of die) LS — 5.0 — nH (1) Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2%. (2) Switching characteristics are independent of operating junction temperature.

4 Motorola TMOS Power MOSFET Transistor Device Data

by recognizing that the power MOSFET is charge controlled. by current from the generator. and Q2 and VGSP are read from the gate charge curve. on–state when calculating td(off). voltage at the source which reduces the gate drive current. tion of drain current, the mathematical solution is complex. sure and, consequently, is not specified. Figure 7. Capacitance Variation

6 Motorola TMOS Power MOSFET Transistor Device Data

Figure 11. Maximum Rated Forward Biased Figure 12. Maximum Avalanche Energy versus Figure 13. Thermal Response Figure 14. Diode Reverse Recovery Waveform

/C0077/C0084/C0069/C0053/C0051/C0078/C0053/C0048/C0069 7Motorola TMOS Power MOSFET Transistor Device Data PACKAGE DIMENSIONS SOT–227B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. DIM A MIN MAX MIN MAX INCHES 31.50 31.70 1.240 1.248 MILLIMETERS B 7.80 8.20 0.307 0.322 C 4.10 4.30 0.161 0.169 D 14.90 15.10 0.586 0.590 E 30.10 30.30 1.185 1.193 F 38.00 38.20 1.496 1.503 G 4.00 0.157 H 11.80 12.20 0.464 0.480 L 8.90 9.10 0.350 0.358 M 12.60 12.80 0.496 0.503 N 25.20 25.40 0.992 1.000 P 1.95 2.05 0.076 0.080 Q 4.10 0.157 R 0.75 0.85 0.030 0.033 S 5.50 0.217 STYLE 1: PIN 1. SOURCE 2. GATE 3. DRAIN 4. SOURCE 2 Q G C B A D E F M N R L H P S Recommended screw torque: 1.3/C0034 0.2 Nm Maximum screw torque: 1.5 Nm

/C0077/C0084/C0069/C0053/C0051/C0078/C0053/C0048/C0069

8 Motorola TMOS Power MOSFET Transistor Device Data

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–54543–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 MTE53N50E/D /C0042/C0077/C0084/C0069/C0053/C0051/C0078/C0053/C0048/C0069/C0047/C0068/C0042