DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Revisions only with customer approval Pg 1 of 2 MMTTCCHH,, MMTTCCSS,, && MMTTCCZZ SSEERRIIEESS TTCCXXOO 11.7 X 9.6 SMD Package Voltage Control Option Wide Frequency Range RoHS Compliant Available Envir & Mech Detail Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ Line 2 = SYYWWL S = Internal Code YYWW
4 Digit Date Code
(Year / Week) L = Denotes RoHS Compli- ant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 Phase Noise Output HCMOS Clipped Sinewave Sinewave Frequency Range 9.600MHZ to 50.000MHZ Load 10k Ohms // 15pF 10k Ohms // 15pF 50 Ohms Supply Current 35mA max 3mA max 25mA max Output Level Logic “1” = 90% of Vdd min Logic “0” = 10% of Vdd max 0.8V p-p min 7 dBm Symmetry See Part Number Guide N/A N/A Freq. Stability vs Temp (Note 1) (See Frequency Stability vs Temperature Table) Freq. Stability vs Aging ±1 ppm per year max Freq. Stability vs Voltage ±0.3 ppm with a 5% change in Vdd Freq. Stability vs Load ±0.3 ppm with a 10% change in Load Operature Temperature (See Frequency Stability vs Temperature Table) Storage Temperature -40°C to +85°C Supply Voltage (Vdd) +3.3VDC ±5% +5.0VDC ±5% Control Voltage with VC option +1.65VDC ±1.50VDC Positive Slope +2.50VDC ±2.00VDC Positive Slope Pin 1 Connection No Connection No Connection VC Option ±10 ppm min Mechanical Trimmer ±3 ppm min Shock MIL-STD-883, Method 2002, Condition B Solderability MIL-STD-883, Method 2003 Vibration MIL-STD-883, Method 2007, Condition A
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Revisions only with customer approval Pg 2 of 2 Part Number Guide Mechanical Details Tape & Reel Dimensions Frequency Stability vs Temperature Table 9.61 [.378] MAX 11.70 [0.461] MAX 7.00 [.276] 7.62 [.300] 1.20 [.047] 8.26 [.325] 7.62 [.300] 2.54 [.100] 2.54 [.100] 1.40 [.055] TRIMMER ACCESS DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED UNIT IS NOT HERMETICALLY SEALED OUTPUTPIN 8 SUPPLY VOLTAGE PIN 1 PIN 7 PIN CONNECTIONS VOLTAGE CONTROL OR NO CONNECTION CASE GROUND PIN 14 MXXXXX SYYWWL XXXXX FrequencyMT 9.6 x 11.7 SMD Please Consult with MMD Sales Department for any other Parameters or Options Supply Voltage 5 = +5 VDC 3 = +3.3 VDC 2 = +2.5 VDC Frequency Stability 10 = ±1.0 ppm 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm Output H = HCMOS S = Clipped Sinewave Z = Sinewave Operating Temperature A = 0°C to +50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Pin 1 Connection Blank = No Connect V = Voltage Control Packaging Blank = Bulk T = Tape and Reel Height Option C = C series (w/ trimmer) Series Option Symmetry Blank = 40/60% A = 45/55% RoHS Compliant Blank = Not Compliant F = is Compliant C Code Stability 10 15 20 25 30 50
- = Available = Consult with the Manufacturer NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M , Dimensions and Tolerances EIA-481-B , 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M , Dimensions and Tolerances EIA-481-B , 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. REEL DIA DIRECTION OF FEED PITCH Tape Width REEL DIA 330 [13.0] Q1PIN 1 ORIENT. 24.00 [.945] 12.00 [.471] TAPE WIDTH PITCH