DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
VER : A_7 update : 2018.06.06 AC -DC ITE & Medical Power Module MTC30 SERIES 30 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Single Output ) MTC30-5S MTC30-12S MTC30-15S MTC30-24S Max Output Wattage (W) 25W 30W 30W 30W Input Voltage 90-264 VAC or 120-370 VDC Frequency (Hz) 47-440 Hz Current (Full load) 650 mA max. (115 VAC) / 400 mA max. (230 VAC) Inrush current (<2ms,Cold Start) 30 A max. (115 VAC) / 60 A max. (230 VAC) Leakage Current < 0.1mA / 264 VAC (Touch Current) No Load Input Power (<240 VAC) <0.15W External Fuse (recommend) 3.15 A slow blow type Output Voltage (V.DC.) 5V 12V 15V 24V Voltage Accuracy ±2% Current (mA) max 5000 2500 2000 1250 Line Regulation (LL-HL) (typ.) ±0.5% Load Regulation (10-100%) (typ.) ±1% Maximum Capacitive Load (at 230 VAC) 6800uF 1600uF 1200uF 470uF Ripple & Noise (max.) (Note 1) 100mVp-p 150mVp-p 150mVp-p 240mVp-p Efficiency (at 230 VAC) 84% 89% 86% 86% Hold-up Time 10 ms min. Protection Over Power Protection Hicc up technique, auto-recovery Over Voltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Isolation Input-Output (V.AC) 4000V Environment Operating Temperature -40°C…+80°C (with derating) Storage Temperature -40°C…+90°C Max Case Operating Temperature 84°C Temperature Coefficient ±0.05%/°C Altitude During Operation 5000m Humidity up to 95% RH MTBF >250,000 h @ 25°C (MIL-HDBK-217F) Atmospheric Pressure 70 kPa to 106 kPa Physical Case Material Plastic resin (flammability to UL 94V-0) Weight 135 g Cooling Method Free air convection KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC Regulated Output and Low Ripple and Noise <0.15W No Load Input Power Isolation Class II CE, CB, UL, cUL Approval 3-Year Product Warranty
VER : A_7 update : 2018.06.06 AC -DC ITE & Medical Power Module MTC30 SERIES 30 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Single Output ) MTC30-5S MTC30-12S MTC30-15S MTC30-24S Safety Approval cUL / UL Standard: UL 60950-1, CAN/CSA C22.2 No. 60950-1-07 ANSI/AAMI ES60601-1 (2005 + C1:09 + A2:10), CAN/CSA-C22.2 No. 60601-1 (2008), 2 x MOPP CB Standard: IEC 60950-1:2005 (2nd Edition) + Am 1:2009 + Am 2:2013 IEC 60601-1:2005 (3rd Edition) + CORR. 1 (2006) + CORR. 2 (2007) + AM1 (2012) or IEC 60601-1 (2012 reprint), 2 x MOPP EMC Conducted and radiated EMI EN55011 class B (Radi ation Class A for MTC30 A2 Series) EMS EN60601-1-2 4th edition NOTE 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. Safety approvals cover frequency 47-63 Hz. 3. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 4. It's recommended to add Varistor 14S471K at L / N input side in parallel. 5. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw MECHANICAL DIMENSION ( Top View ) BLOCK DIAGRAM PIN# Single
1 AC IN (N)
2 AC IN (L)
4 NO PIN
VER : A_7 update : 2018.06.06 AC -DC ITE & Medical Power Module MTC30 SERIES 30 Watts http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -3- DERATING SCREW TERMINAL MTC30-A2 PIN# Single