PCI-1245L ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Features
Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting Supports 2 axis linear interpolation Supports 3 axis linear interpolation (PCI-1245LIO only) Supports 2 axis arc interpolation (PCI-1245LIO only) Supports T/S-curve Supports speed override Hardware emergency input Watchdog timer Supports programmable acceleration/deceleration rate Programmable interrupt RDY dedicated input channels & SVON/ERC dedicated output channels are switchable for general input and output purposes Supports extra 16 isolated DI / 16 isolated DO via wiring board (PCI-1245LIO only) Introduction The PCI-1245Lare 4-axis universal PCI card supporting (both 3.3 V and 5 V signal slots) stepping/pulse-type servo motor control cards designed for entry-level applications which need to control JOG, point to point, continuous move, and interpolation motion such as 2-axis linear. In addition, all Advantech motion controllers use the “Common Motion API” architecture which is a unified user programming interface and graphical utility. This architecture saves application maintenance and upgrades. Programmers can benefit from integrating any Advantech SoftMotion controller without changing large amounts of the application code. User-friendly examples decrease programming workload, helping users complete configuration and diagnosis easily. Specifications Pulse Type Motion Control Motor Driver Support Pulse-type servo/stepping Number of Axes 4 Interpolation 2-axis linear interpolation Max. Output Speed 1 Mbps Step Count Range ±2, 147, 483, 646 Pulse Output Type Pulse/direction (1-pulse, 1-direction type) , CW/CCW (2-pulse type) or single-ended +5V output Position Counters Range of command and actual position Velocity Profiles T-Curve, S-Curve Local I/O Machine Interfaces: LMT+, LMT-, ORG Servo Driver Interfaces: ALM, INP Encoder Interface Input Type Quadrature (A/B phase) or up/down Counts per Enc. Cycle x1, x2, x4 (A/B phase only) Input Range 3~10 V Isolation Protection 2,500 VDC Max. Input Frequency 10 MHz under 4xAB mode General Bus Type Universal PCI V2.2 Connectors 1 x 100-pin SCSI female connector Dimensions (L x H) 175 x 100 mm (6.9" x 3.9") Power Consumption Typical: 5 V @ 0.6 A Max.: 5 V @ 1 A Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3) Operating Temperature 0 ~ 60°C (32 ~ 140°F) Storage Temperature -20 ~ 85°C (-4 ~ 185°F)
Ordering Information
PCI-1245L-AE 4-axis Stepping/Pulse-type Servo Motor Control Universal PCI Card Accessories MTB-3956LIO-AE 100-pin DIN-rail SCSI 4-axis Motion Wiring Board w/ I/O-extension (Only for PCI-1245LIO) ADAM-3956-AE 100-pin DIN-rail SCSI 4-axis Motion Wiring Board ADAM-3955-AE 50-pin DIN-rail SCSI 2-axis Motion Wiring Board ADAM-3952-AE 50-pin DIN-rail SCSI and Box Header Board PCL-101100M-1E/2E/3E 100-pin SCSI Cable, 1m/2m/3m PCL-10251-1E/2E/3E 100-pin SCSI to Two 50-pin SCSI Cable, 1m/2m/3m PCL-20153PA5-S2E 50-pin Cable to Panasonic A4/A5 Servo, 2 m PCL-20153YS5-S2E 50-pin Cable to Yaskawa Sigma V/7 Servo, 2 m PCL-20153MJ3-S2E 50-pin Cable to Mitsubishi J3/J4 Servo, 2 m PCL-20153DA2-S2E 50-pin Cable to Delta A2 Servo, 2 m 4-Axis Stepping and Servo Motor Control Universal PCI Card RoHS COMPLIANT 2002/95/EC All product specifications are subject to change without notice. Last updated: 9-Dec-2019