MTAH MMD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Specifications subject to change without notice Revision MTAH092208K MTAH, MTAS, and MTAZ Series ¾ Industry Standard Package ¾ +3.30VDC or +5.00VDC ¾ RoHS Compliant Available ¾ Up to 800.000MHZ ELECTRICAL SPECIFICATIONS: Output HCMOS Clipped Sinewave Sinewave Load 10k Ohms // 15pF 10k Ohms // 15pF 50 Ohms Supply Current 35mA max 3mA max 35mA max Output Level Logic “1” = 90% of Vdd min Logic “0” = 10% of Vdd max 1.0V p-p min 0 dBm min Symmetry 40%/60% at 50% of Waveform N/A N/A Freq. Stability vs Temp (Note 1) (See Fr equency Stability vs Temperature Table) Freq. Stability vs Aging ±1 ppm per year max Freq. Stability vs Voltage ±0.3 ppm with a 5% change in Vdd Freq. Stability vs Load ±0.3 ppm with a 10% change in Load Storage Temperature -40°C to +85°C Supply Voltage (Vdd) +3.3VDC ±5% +5.0VDC ±5% Control Voltage with VC option +1 .65VDC ±1.50VDC Positive Slope +2 .50VDC ±2.00VDC Positive Slope Pin 1 Connection No Connection No Connection VC Option ±10 ppm min Mechanical Trimmer when Specified ±3 ppm min If no mechanical trimmer is specified, trimmer may still be present depending on frequency stability option. Note 1: If no mechanical trimmer, oscillator frequency shall be ±1 ppm at +25°C ±3°C at time of shipment. PART NUMBER GUIDE: MT FREQUENCY Blank = Not Compliant F = is Compliant RoHS Compliant

14 PIN DIP TCXO

Blank = N/C V = Voltage Control Blank = No Added Options G = Gull-wing Value Added Options 10 = ±1.0 ppm 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm Frequency Stability Operating Temperature A = 0°C to +50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Please Consult with MMD Sales Department for any other Parameters or Options. A = A Series (8.0 mm ht) Series Options 5 = +5.0VDC 3 = +3.3VDC Supply Voltage H = HCMOS S = Clipped Sinewave Z = Sinewave Output Blank = No Trimmer M = Mechanical Trimmer Trimmer Option A MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com

Specifications subject to change without notice Revision MTAH092208K FREQUENCY STABILITY vs TEMPERATURE TABLE: F -40°C TO +85°C ●

  • = Available = Consult with the Manufacturer MECHANICAL DIMENSIONS: 2.40 [.094] 1.00 [.039] 5.00 [.197] 7 1 7.62 [.300] 15.24 [.600] 3.81 [.150] 7.62 [.300] 4.00 [.157] 0.50 [.020] 18.6 [.73] MAX 12.2 [.48] MAX 8.00 [.315] MAX OPTIONAL TRIMMER PIN 14 VOLTAGE CONTROL OR NO CONNECTION (SEE *) SUPPLY VOLTAGE (VDD) OUTPUT CASE GROUND PIN CONNECTIONS PIN 8 PIN 7 PIN 1DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED UNIT IS NOT HERMETICALLY SEALED *IF PIN 1 IS NOT CONNECTED, PIN MAY BE DELETED ENVIRONMENT / MECHANICAL: Shock MIL-STD-883, Method 2002, Condition B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-883, Method 215 Vibration MIL-STD-883, Method 2007, Condition A PHASE NOISE: MARKING:

10 Hz -65 dBc/HZ

100 Hz -85 dBc/HZ

Line 1 =MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Dot to denote Pin 1 MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com