MTA10HA ETC1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
- • IInndduussttrryy SSttaannddaarrdd PPaacckkaaggee
- • 55..00 oorr 33..33 VVoolltt
- • HHCCMMOOSS,, SSiinneewwaavvee,, CClliippppeedd SSiinnee
- • 11..000000MMHHzz ttoo 11..000000GGHHzz
- • SSttaabbiilliittyy DDoowwnn ttoo ±±11ppppmm MMTTAA aanndd MMTTBB SSeerriieess Full-Size (7.3mm or 4.7mm height) www.mmdcomp.com Toll Free 1-877-663-2667 / Fax: 949-753-5889 Specifications subject to change without notice Electrical Specifications H Option = HCMOS Output Frequency Range 1.000MHz to 160.000MHz Frequency Stability Down to ±1ppm Load 10K Ohms // 15pF Supply Current 35mA max Output Logic”1” Level = 0.9Vdd min. Logic”0” Level = 0.1Vdd max. S Option = Clipped Sine Output Frequency Range 8.000MHz to 300.000MHz Frequency Stability Down to ±1ppm Load 10K Ohms // 15pF Supply Current 3mA max. Output 1.0V p-p min. Z Option = Sinewave Output Sinewave Output 8.000MHz to 1.000GHz Frequency Stability Down to ±1ppm Load 50 Ohms Supply Current 5mA max. Output 7dBm min. Operating Temperature Range See Part Numbering Guide Storage Temperature Range -40°C to +85°C Supply Voltage (Vdd) Vdd = 5V 5.0Vdc ±5% Vdd = 3.3V 3.3Vdc ±5% Internal Trim (Top of can) ±3ppm min. Control Voltage Vdd = 5V 2.5Vdc±2.0Vdc Positive Slope Vdd = 3.3V 1.65Vdc±1.5Vdc Positive Slope Pin 1 Connection Blank No Connect V Option ±10ppm min. Frequency Stability vs. Aging ±1ppm per year max. vs. Voltage (with a 5% change) ±0.3ppm vs. Load (with a 10% change) ±0.3ppm Symmetry @50% of waveform w/CMOS load 40/60%
www.mmdcomp.com Toll Free 1-877-663-2667 / Fax: 949-753-5889 Specifications subject to change without notice Part Numbering Guide Mechanical Dimensions Markings Line 1: MMD Line 2: Part Number Line 3: Frequency Line 4: Date Code Pin Connections Pin 1: Control Voltage or N/C Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage Cut Leads and Gull-Wing are available for this package. See VA1 and VA3 for specs. * Check with factory for additional stability vs. temperature options 18.3 ±0.20 .720 ±.012 7.62 ±0.20 .300 ±.012 9.6 ±0.20 .720 ±.012 1.0 .039 15.24 ±0.20 .600 ±.012 4.0±0.2 .157±.012 0.5 .020 11.7 ±0.20 .460 ±.012 5.0 .197 #1 #14 #7 #8 Markings Optional Trimmer MTA end view 7.3 .287 2.4 .094 4.7 .185 MTB end view FrequencyMT Frequency Stability* 10 = ±1ppm 15 = ±1.5ppm 20 = ±2ppm 25 = ±2.5ppm 30 = ±3ppm 35 = ±3.5ppm 50 = ±5ppm Pin 1 Connection Blank = No Connect V = Voltage Control Output Type H = HCMOS S = Clipped Sinewave Z = Sinewave Supply Voltage Blank = 5 Volt 3 = 3.3 Volt Operating Temp. Range* A = 0°C to +50°C B = -10°C to +60°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Series Option A = A Series(7.3mm Hgt.) B = B Series(4.7mm Hgt.) Trimmer Option Blank = No Trimmer M = Mechanical Trimmer 14 pin DIP