MT7842B MAXIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Maximizing IC Performance Non-isolated APFC BUCK LED Driver Tel: 86-10-62662828 Copyright © 2016 Maxic Technology Corporation Page 1

DESCRIPTION

The MT7842B is a high-PF, non-isolate LED Driver IC. The floating-ground, high-side BUCK topology makes full wave detection possible. High precision output current is achieved. MT7842B works in Quasi-Resonant Mode (QRM), which improves both of efficiency and EMI performance. The system integrates the ultra-high voltage power supply circuit, the start-up resistor and power supply diode are not needed. Low external component count and cost is achieved. Various protections such as over voltage protection (OVP), over current protection (OCP) and over temperature compensation, etc. are embedded to improve reliability. The MT7842B integrates 550V MOSFET, which further simplifies external circuit.

FEATURES

 Single-stage active power factor correction (PFC > 0.90)  Ultra-high voltage power supply without start-up resistor and power supply diode  High accurate LED current (±3%)  Good Line and Load Regulation (±2%)  Quasi-Resonant mode (QRM) operation  Various protection schemes  Available in SOP7 packages

APPLICATIONS

 E14/E27/PAR30/PAR38/GU10 LED lamp  T8/T10 LED tube  Other LED lighting applications Typical Application Circuit