MSWA-2-20 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Maximum Ratings Features

  • cellular
  • PCN
  • 2-way radio
  • receiver antenna switching
  • wideband, DC to 2.0 GHz
  • low video leakage, 8 mVp-p typ.
  • very fast switching, 5ns typ.

Applications

CASE STYLE: XX211 Outline Drawing MSWA-2-20+ Electrical Specifications FREQ.3 (GHz) INSERTION LOSS (dB) 1dB COMPR. (dBm) IN-OUT ISOLATION (dB) DC-100 MHz 100-500 MHz 500-1000 MHz 1000-2000 MHz DC-100 MHz 100-500 MHz 500-1000 MHz 1000-2000 MHz DC-100 MHz 100-500 MHz 500-1000 MHz 1000-2000 MHz Pin Connections RF IN 2 RF OUT 1 8 RF OUT 2 5 CONTROL 1 3 CONTROL 2 1 GROUND 4,6,7 Additional Specifications Control Voltage -8/0 for compression spec, -8 to -5/0 for all other specs Control Current, mA 0.2 max to -8V, 0.02 max at 0 to -0.2V VSWR(:1) DC-1GHz 1.2 typ. 1-2GHz 1.4 typ. Rise/Fall time (10%-90%), ns Switching time, 50% of Con- trol to 90% RF(Turn-on), ns 10% RF(Turn-off), ns 3 typ. 9 typ 3 typ Video Leakage, mVp-p 0/-5V Control 19 typ. Video leakage or break through is defined as leakage of switching signal to RF output ports. 1. RF Power Input (dBm), Max. DC-100MHz 100-500 MHz 500-2000MHz

  • Steady State Control 0/-8V 24 27 33
  • As a Modulator 12 17 23 2. Control Current, 500µA (occurs at -9V to -12V typ.) 3. All RF connections must be DC blocked or held at 0V DC. 50W SPDT, Absorptive DC3 to 2.0 GHz Switch Surface Mount REV. D M151107 MSWA-2-20+ WP/CP/AM 150928 Page 1 of 2 Demo Board MCL P/N: TB-205 Suggested PCB Layout (PL-219) CONTROL LOGIC Control Ports RF outputs 1 2 1 2 0 -V Off On -V 0 On Off Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C Input Power see Note 1 Control Current see Note 2 Electrical Schematic Outline Dimensions ( )inch mm PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 ABCDE FG H J K M N P wt Permanent damage may occur if any of these limits are exceeded. Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 20, 50, 100, 200, 500, 1000 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits FREQ. (MHz) ON INSERTION LOSS (dB) Control @ 0V/-5V) OFF ISOLATION (dB) Control @ 0V/-5V) VSWR RF IN RF OUT RF IN-RF OUT RF IN - RF OUT RF OUT 1-RF OUT 2 MSWA-2-20+ ISOLATION 100 0 500 1000 1500 2000 FREQUENCY (MHz) ISOLATION (dB) RF IN-RF OUT RF OUT1-RF OUT2 at RF level of 0 dBm MSWA-2-20+ VSWR 1.0 1.1 1.2 1.3 1.4 1.5 0 500 1000 1500 2000 FREQUENCY (MHz) VSWR RF IN RF OUT at RF level of 0 dBm MSWA-2-20+ INSERTION LOSS 0.0 0.4 0.8 1.2 1.6 2.0 0 500 1000 1500 2000 FREQUENCY (MHz) INSERTION LOSS (dB) at RF level of 0 dBm MSWA-2-20+ Typical Performance Data Page 2 of 2