MSW60 RUBYCON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
*85 to 264V AC universal input *High efficiency up to 85% *Low EMI, meeting FCC B, CISPR B *Less then 0.3mA leakage *Thin type below 1U *RoHS correspond UL60601-1 Recognized CSA22.2 No.60601.1 Certified (cUL) EN60601-1 (NEMKO Certified) CEmark(LVDonly) *Madical equipment * Safety systems *Dental systems *Control equipment *Microprocessor systems *Monitoring equipment *Peak Loads (for Motor Drive, Lamp) *6 MSW60 SPECIFICATIONS ITEM MSW60-12 MSW60-15 MSW60-24 MSW60-36 MSW60-48
1 Rated output DC voltage 12V 15 V 24V 36V 48V
5 Efficiency (120/230V AC, TYP) *1 81% / 76% 82% / 77% 83% / 78% 84% / 79% 85% / 80%
6 Maximum ripple noise 150mVpp 150mVpp 150mVpp 250mVpp 250mVpp
9 Input voltage range 85V ~ 264V
10 Input frequency range 47Hz ~ 63Hz
11 Input current *1 1.6A (100V AC), 0.9A(230V AC)
12 Inrush current *2 20Apk MAX (120V AC), 40Apk MAX (240V AC)
13 Hold-up time *5 20msMIN
*1 When maximum output is worked *2 When cold start works with rated voltage at 25ºC ambient temperature *3 Recovers automatically *4 Recovers on input again *5 When maximum output is worked, after last AC line peak *6 (Peak) : Peak Loads for 10 seconds or less are acceptable. Specifications subject to change without notice.(2004.9)
MSW60 GENERAL SPECIFICATIONS ITEM 1 Maximum line / load regulation ±0.5%
2 V oltage tolerance ratio ±3% at line, load, time, temperature
3 Operating temperature -10 ~ 60ºC (Refer to Output derating)
4 Operating humidity 30 ~ 90%RH (Non condensing)
5 Storage temperature -30 ~ 85ºC
6 Storage humidity 10 ~ 95%RH (Non condensing)
7 Cooling Convection or forced air cooling (Refer to Output derating)
8 Electric strength voltages Input – Output 4000V AC 1 minute, Input – FG 1500V AC 1 minute, Output –FG 500V AC 1 minute
9 Insulation resistance 100MΩ MIN DC500V 25ºC 70%RH Input – Output, Input – FG , Output – FG
10 Leakage current 0.3mA MAX (240V AC,50Hz)
11 Vibration 10 ~ 55Hz 2G (3 directions each 1 hour)
12 Shock 20ms 20G (3 directions each 3times)
13 Safety standards UL60601-1, CSA60601.1 (cUL), EN60601-1 (NEMKO) Approvals
14 Conduction noise Meeting FCC Class B, EN55022 Class B, VCCI Class B
15 Mains surge Meeting EN61000-4-5 Level 3/4KV(CM), 2KV(DM)
16 Dimensions 127(W) 76(D) 32(H) mm/5.00”(W) 3.00”(D) 1.26”(H) 17 Weight 255g /0.57lb. TYP MSW60 OUTLINE DRAWING Connectors Used Part Description Part Na me Manufacturer Q.T.Y CN1 Pin Header (Input side) B2P3-VH or T7094 JST EMUDEN CN2 Pin Header (Output side) B4P-VH or T7094 JST EMUDEN Matching Housings and Pins (Not included with the product) Part Description Part Na me Manufacturer Q.T.Y CN1 Socket Housing VHR-3N JST 1 ʢ̣ʣ ʢ̡ʣ ̘̣̍ ʢʵʣ ʢʴʣ ̘̣̎ ̎ʵ̢̏ ̒ ̍̍̑ ̍̎̓ ̒ ̍̍̑ ̏̓ɽ̑ ̎ʵ̢̏ CN2 Socket Housing (CN1, CN2) Terminal Pins VHR-4N BVH-21T-P1.1 JST JST MSW60 OUTPUT DERATING ̍̌̌ ʵ̍̌ Mounting Direction (conv) ̘̣̎ ̘̣̍ Specifications subject to change without notice.(2004.9) A:Conv.With Cover(option) Conv.Open Frame B:Recommended minimum air Vrocity 0.7m3/minute