MSW150 RUBYCON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

*Resonant switchers, power factor correction and main converter *Power factor correction up to 0.99, meeting IEC61000 -3-2(EN61000-3-2) *85 to 264V AC universal input *High efficiency up to 90% *Low EMI, meeting FCC B, CISPR B *Less then 0.3mA leakage *Thin type below 1U UL2601-1 Recognized CSA22.2 No.601.1 Certified (cUL) EN60601-1 (NEMKO Certified) CE mark (LVD only) *Madical equipment * Safety systems *Dental systems *Control equipment *Microprocessor systems *Monitoring equipment *Peak Loads (for Motor Drive, Lamp) *6 MSW150 SPECIFICATIONS ITEM MSW150-12 MSW150-15 MSW150-24 MSW150-36

1 Rated output DC voltage 12 V 15V 24 V 36V

5 Efficiency (120/230V AC, TYP) *1 85% / 86% 86% / 87% 87% / 88% 88% / 89%

6 Maximum ripple noise 80mVpp 100mVpp 150mVpp 200mVpp

7 Over current protection *3 25.5A ~ 20.5A ~ 13A ~ 8.5A ~ 8 Over voltage protection *4 13.8V ~ 17.3V ~ 27.6V ~ 40V ~

9 Input voltage range 85V ~ 264V

10 Input frequency range 47Hz ~ 63Hz

11 Input current *1 1.7A (100V AC), 0.8A(230V AC) 12 Power factor *1 0.99TYP (100V AC), 0.95TYP (230V AC)

13 Inrush current *2 20Apk MAX (120V AC), 40Apk MAX (240V AC)

14 Hold-up time *5 20msMIN

*1 When maximum output is worked *2 When cold start works with rated voltage at 25ºC ambient temperature *3 Recovers automatically *4 Recovers on input again *5 When maximum output is worked, after last AC line peak *6 (Peak) : Peak Loads for 10 seconds or less are acceptable. Input voltage range AC120V~AC264V only. Specifications subject to change without notice.(2004.9)

MSW150 GENERAL SPECIFICATIONS ITEM 1 Maximum line / load regulation ±0.5%

2 V oltage tolerance ratio ±3% at line, load, time, temperature

3 Operating temperature -10 ~ 55ºC (Refer to Output derating)

4 Operating humidity 30 ~ 90%RH (Non condensing)

5 Storage temperature -30 ~ 85ºC

6 Storage humidity 10 ~ 95%RH (Non condensing)

7 Cooling Convection or forced air cooling (Refer to Output derating)

8 Electric strength voltages Input – Output 4000V AC 1 minute, Input – FG 1500V AC 1 minute, Output –FG 500V AC 1 minute

9 Insulation resistance 100MΩ MIN DC500V 25ºC 70%RH Input – Output, Input – FG , Output – FG

10 Leakage current 0.3mA MAX (240V AC,50Hz)

11 Vibration 10 ~ 55Hz 2G (3 directions each 1 hour)

12 Shock 20ms 20G (3 directions each 3times)

13 Safety standards UL2601-1, CSA601.1 (cUL), EN60601-1 (NEMKO) Approvals

14 Conduction noise Meeting FCC Class B, EN55022 Class B, VCCI Class B

15 Harmonic distortion Meeting EN61000-3-2

16 Mains surge Meeting EN61000-4-5 Level 3/4KV(CM), 2KV(DM)

17 Dimensions 105(W) 190(D) 32(H) mm/4.13 “(W) 7.48”(D) 1.26”(H) 18 Weight 590g /1.30lb. TYP MSW150 OUTLINE DRAWING Connectors Used Part Description Part Na me Manufacturer Q.T.Y CN1 Pin Header (Input side) B2P3-VH or T7094 JST EMUDEN CN2 Pin Header (Output side) B4P-VH or T7094 JST EMUDEN Matching Housings and Pins (Not included with the product) Part Description Part Na me Manufacturer Q.T.Y CN1 Socket Housing VHR-3N JST 1 CN2 Socket Housing (CN1, CN2) Terminal Pins VHR-4N BVH-21T-P1.1 JST JST MSW150 OUTPUT DERATING ̍̌̌ ʵ̍̌ ̖̗ ̘ Mounting Direction (conv) Specifications subject to change without notice.(2004.9) ̍̎̍̑ ̍̕ɽ̑ ̔ ̍̏̒ ̎̒̐̎ ̍̌̕ ̍̌̑ ʢ̣ʣ ʢ̡ʣ ̘̣̍ ʢʴʣ ʢʵʣ ̘̣̎ ̏ʵ̢̏ ̎ʵ̢̏ ˎ̍̌̕ ˎ̏̓ ̘̣̎ ̘̣̍ A:Conv.With Cover(option) B:Conv.Open Frame C:Recommended minimum air Vrocity 0.7m3/minute