MSW-2-20 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Outline Dimensions ( )inch mm Maximum Ratings Features

  • cellular
  • PCN
  • 2-way radio
  • receiver antenna switching
  • wideband, DC to 2.0 GHz
  • very fast switching, 4ns typ.
  • low insertion loss, 0.5 dB typ.
  • low video leakage, 15 mVp-p typ.

Applications

Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C Input Power see Note 1 Control Current see Note 2 Outline Drawing MSW-2-20+ Electrical Specifications FREQ.4 (GHz) INSERTION LOSS (dB) 1dB COMPR. (dBm) IN-OUT ISOLATION (dB) DC-100 MHz 100-500 MHz 500-1000 MHz 1000-2000 MHz DC-100 MHz 100-500 MHz 500-1000 MHz 1000-2000 MHz DC-100 MHz 100-500 MHz 500-1000 MHz 1000-2000 MHz Pin Connections RF IN 1 RF OUT 1 6 RF OUT 2 3 CONTROL 1 5 CONTROL 2 4 GROUND 2,7,8 Additional Specifications Control Voltage -8/0 for compression spec, -8 to -5/0 for all other specs Control Current, mA 0.2 max to -8V, 0.02 max at 0 to -0.2V VSWR(:1) DC-1GHz 1.2 typ. 1-2GHz 1.4 typ. Rise/Fall time (10%-90%), ns Switching time, 50% of Control to 90% RF(Turn-on), ns 10% RF(Turn-off), ns 4 typ. 10 typ 4 typ Video Leakage, mVp-p 0/-5V Control 19 typ. PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Demo Board MCL P/N: TB-203 Suggested PCB Layout (PL-108) CONTROL LOGIC Control Ports RF outputs 1 2 1 2 0 -V Off On -V 0 On Off Video leakage or break through is defined as leakage of switching signal to RF output ports. 1. RF Power Input(dBm), Max. DC-100MHz 100-500MHz 500-2000MHz

  • Steady State Control 0/-8V 23 27 31
  • As a Modulator 11 17 21 2. Control Current, 500µA (occurs at -9V to -12V typ) 3. OFF state of RF output is low impedance 4. All RF connections must be DC blocked or held at 0V DC. Electrical Schematic ABCDE FG H J K M N P wt CASE STYLE: XX211 Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 20, 50, 100, 200, 500, 1000 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits 50W SPDT, Reflective DC4 to 2.0 GHz Switch Surface Mount REV. D M151107 MSW-2-20+ WP/CP/AM 150928 Page 1 of 2 Permanent damage may occur if any of these limits are exceeded.

FREQ. (MHz) ON INSERTION LOSS (dB) Control @ 0V/-5V) OFF ISOLATION (dB) Control @ 0V/-5V) IN-OUT VSWR RF IN RF OUT RF IN-RF OUT RF IN-RF OUT RF OUT1-RF OUT2 (ON PORT) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits MSW-2-20+ ISOLATION 100 120 0 500 1000 1500 2000 FREQUENCY (MHz) ISOLATION (dB) RF IN - RF OUT RF OUT1-RF OUT2 at RF level of 0 dBm MSW-2-20+ VSWR 1.0 1.1 1.2 1.3 0 500 1000 1500 2000 FREQUENCY (MHz) VSWR INPUT OUTPUT at RF level of 0 dBm Typical Performance Data MSW-2-20+ INSERTION LOSS 0.0 0.4 0.8 1.2 0 500 1000 1500 2000 FREQUENCY (MHz) INSERTION LOSS (dB) at RF level of 0 dBm MSW-2-20+ Page 2 of 2