MSS6132-472ML COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. SMT Power Inductors – MSS6132 Document 641-1 Document 641-1 Revised 10/20/08 Designer’s Kit C364 contains 3 of each value Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant gold over nickel over phos bronze. Other terminations available at additional cost. Weight 0.33 – 0.38 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 500/7″ reel, 1500/13″ reel; Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.1 mm pocket depth PCB washing Only pure water or alcohol recommended DCR SRF Isat (A)4 Irms (A)5 Inductance2 max typ 3 10% 20% 30% 20°C 40°C Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise 6.1 × 6.1 mm footprint; 3.2 mm high shielded inductors Low DCR and excellent current handling 1. Please specify termination and packaging codes: MSS6132-823MLC Termination: L= RoHS compliant gold over nickel over phos bronze Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reelEIA-481 embossed plastic tape (500 per full reel). B= Less than full reel In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13″ machine-ready reel EIA-481 embossed plastic tape. Factory order only, not stocked (1500 per reel per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. SRF measured using Agilent/HP 4191A or equilvalent. 4. DC current at which the inductance drops the specified amount from its value without current. 5. Current that causes the specified temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 641-2 Document 641-2 Revised 10/20/08 SMT Power Inductors – MSS6132 0.01 0.1 11 0 Current (A) 100 1000 Inductance (µH) 100 µH 4.7 µH 22 µH Typical L vs Current Irms Derating -40 -20 0 20 40 60 80 100 140 120 Ambient temperature (°C) 120 110 100 25°CPercent of rated rms I Typical L vs Frequency 0.01 0.1 11 0 Frequency (MHz) 100 1000 Inductance (µH) 100 µH 22 µH 4.7 µH max 0.237 6,0 0.158 4,0 min Recommended Land Pattern 0.220 5,6 0.220 5,6 0.079 2,0 0.240 6,1 0.240 6,1123 0.126 3,2 0.079 2,0 Dimensions are of the case not including the termination. For maximum overall dimensions including the termination, add 0.016 in / 0,4 mm. Dimensions are in inches mm