DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Shielded Power Inductors – MSS6132 Document 641-1 Document 641-1 Revised 03/06/12 Designer’s Kit C364 contains 3 of each value Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant matte tin over nickel over phos bronze (current production) or gold over nickel over phos bronze (prior production). Other terminations available at additional cost. Weight 0.33 – 0.38 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 500/7″ reel, 1500/13″ reel; Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.1 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. DCR SRF Isat (A)4 I rms (A)5 Inductance2 max typ3 10% 20% 30% 20°C 40°C Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
- 6.1 × 6.1 mm footprint; 3.2 mm high shielded inductors
- Low DCR and excellent current handling 1. Please specify termination and packaging codes: MSS6132-823MLC Termination: L = RoHS compliant matte tin over nickel over phos bronze (current production) or gold over nickel over phos bronze (prior production) Special order: T = RoHS tin-silver-copper (95.5/4/0.5) over gold over nickel over phos bronze or S = non-RoHS tin-lead (63/37) over gold over nickel over phos bronze. Packaging: C = 7″ machine-ready reel EIA-481 embossed plastic tape (500 per full reel). B = Less than full reel In tape, but not machine-ready. To have a lead- er and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel EIA-481 embossed plastic tape. Factory order only, not stocked (1500 per reel per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. SRF measured using Agilent/HP 4191A or equilvalent. 4. DC current at which the inductance drops the speci- fied amount from its value without current. 5. Current that causes the specified temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 641-2 SMT Power Inductors – MSS6132 0.01 0.1 11 0 Current (A) 100 1000 Inductance (µH) 100 µH 4.7 µH 22 µH Typical L vs Current Irms Derating -40 -20 02 04 06 08 0 100 140120 Ambient temperature (°C) 120 110 100 25°CPe rcent of rated rmsI Typical L vs Frequency 0.01 0.1 11 0 Frequency (MHz) 100 1000 Inductance (µH) 100 µH 22 µH 4.7 µH Dimensions are in inches mm max 0.220 5,6 0.220 5,6 0.079 2,0 0.240 6,1 0.240 6,1123 0.126 3,2 Dimensions are of the case not including the termination. For maximum overall dimensions including the termination, add 0.016 in / 0,4 mm. 0.237 6,0 0.237 6,0 min Recommended Land Pattern 0.079 2,0 0.191 4,85 ∅ Document 641-2 Revised 03/06/12